linux-kernel - [PATCH net-next v1 1/1] net: phy: at803x: fix NULL pointer dereference on AR9331 PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220616113105.890373-1-o.rempel@pengutronix.de>
Date:   Thu, 16 Jun 2022 13:31:05 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>
Cc:     Oleksij Rempel <o.rempel@...gutronix.de>, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH net-next v1 1/1] net: phy: at803x: fix NULL pointer dereference on AR9331 PHY

Latest kernel will explode on the PHY interrupt config, since it depends
now on allocated priv. So, run probe to allocate priv to fix it.

 ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@...00000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13)
 CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34
         ...
 Call Trace:
 [<8050e8a8>] at803x_config_intr+0x5c/0xd0
 [<80504b34>] phy_request_interrupt+0xa8/0xd0
 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac
 [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130
 [<8074d8ec>] dsa_slave_create+0x270/0x420
 [<80743b04>] dsa_port_setup+0x12c/0x148
 [<8074580c>] dsa_register_switch+0xaf0/0xcc0
 [<80511344>] ar9331_sw_probe+0x370/0x388
 [<8050cb78>] mdio_probe+0x44/0x70
 [<804df300>] really_probe+0x200/0x424
 [<804df7b4>] __driver_probe_device+0x290/0x298
 [<804df810>] driver_probe_device+0x54/0xe4
 [<804dfd50>] __device_attach_driver+0xe4/0x130
 [<804dcb00>] bus_for_each_drv+0xb4/0xd8
 [<804dfac4>] __device_attach+0x104/0x1a4
 [<804ddd24>] bus_probe_device+0x48/0xc4
 [<804deb44>] deferred_probe_work_func+0xf0/0x10c
 [<800a0ffc>] process_one_work+0x314/0x4d4
 [<800a17fc>] worker_thread+0x2a4/0x354
 [<800a9a54>] kthread+0x134/0x13c
 [<8006306c>] ret_from_kernel_thread+0x14/0x1c

Fixes: 3265f4218878 ("net: phy: at803x: add fiber support")
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
 drivers/net/phy/at803x.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 6a467e7817a6..b72a807f2e03 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -2072,6 +2072,8 @@ static struct phy_driver at803x_driver[] = {
 	/* ATHEROS AR9331 */
 	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
 	.name			= "Qualcomm Atheros AR9331 built-in PHY",
+	.probe			= at803x_probe,
+	.remove			= at803x_remove,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	.flags			= PHY_POLL_CABLE_TEST,
-- 
2.30.2