| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <PH0PR11MB5880C6A31DF2ABCE5B43B574DAAF9@PH0PR11MB5880.namprd11.prod.outlook.com>
Date: Fri, 17 Jun 2022 02:29:54 +0000
From: "Zhang, Qiang1" <qiang1.zhang@...el.com>
To: "paulmck@...nel.org" <paulmck@...nel.org>
CC: "frederic@...nel.org" <frederic@...nel.org>,
"rcu@...r.kernel.org" <rcu@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] rcu: Remove debug_object_active_state() from
debug_rcu_head_queue/unqueue()
On Fri, May 27, 2022 at 08:34:20AM +0000, Zhang, Qiang1 wrote:
>
>
> On Wed, May 25, 2022 at 11:33:46PM +0000, Zhang, Qiang1 wrote:
> > On Fri, May 13, 2022 at 01:03:19AM +0000, Zhang, Qiang1 wrote:
> > > On Tue, May 10, 2022 at 11:07:48AM +0800, Zqiang wrote:
> > > > Currently, the double call_rcu() detected only need call
> > > > debug_object_activate() to check whether the rcu head object is
> > > > activated, the rcu head object usage state check is not
> > > > necessary and when call rcu_test_debug_objects() the
> > > > debug_object_active_state() will output same callstack as
> > > > debug_object_activate(). so remove
> > > > debug_object_active_state() to reduce the output of repeated callstack.
> > > >
> > > > Signed-off-by: Zqiang <qiang1.zhang@...el.com>
> > > >
> > > >Could you please post the output of the dmesg output of a failed check with your change?
> > > >
> > >
> > > Original output:
> > >
> > > [ 0.818279] ODEBUG: activate active (active state 1) object type: rcu_head hint: 0x0
> > > [ 0.818296] WARNING: CPU: 1 PID: 1 at lib/debugobjects.c:505 debug_print_object+0xd8/0xf0
> > > [ 0.818301] Modules linked in:
> > > [ 0.818304] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.18.0-rc6-next-20220511-yoctodev-standard+ #75
> > > [ 0.818306] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> > > [ 0.818308] RIP: 0010:debug_print_object+0xd8/0xf0
> > > [ 0.818311] Code: dd 40 9e 03 9d e8 48 62 a2 ff 4d 89 f9 4d 89 e8 44 89 e1 48 8b 14 dd 40 9e 03 9d 4c 89 f6 48 c7 c7 c0 93 03 9d e8 f6 1a b1 00 <0f> f
> > > [ 0.818313] RSP: 0000:ffff88810033fad0 EFLAGS: 00010082
> > > [ 0.818315] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
> > > [ 0.818317] RDX: 0000000000000002 RSI: 0000000000000004 RDI: ffffed1020067f4c
> > > [ 0.818319] RBP: ffff88810033fb00 R08: ffffffff9b50d898 R09: fffffbfff3bf5c6d
> > > [ 0.818320] R10: 0000000000000003 R11: fffffbfff3bf5c6c R12: 0000000000000001
> > > [ 0.818322] R13: ffffffff9ce769a0 R14: ffffffff9d039a80 R15: 0000000000000000
> > > [ 0.818324] FS: 0000000000000000(0000) GS:ffff888158880000(0000) knlGS:0000000000000000
> > > [ 0.818327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 0.818329] CR2: 0000000000000000 CR3: 000000017600e000 CR4: 00000000001506e0
> > > [ 0.818330] Call Trace:
> > > [ 0.818331] <TASK>
> > > [ 0.818333] debug_object_activate+0x2b8/0x300
> > > [ 0.818336] ? debug_object_assert_init+0x220/0x220
> > > [ 0.818340] ? __kasan_check_write+0x14/0x20
> > > [ 0.818343] call_rcu+0x98/0x1110
> > > [ 0.818347] ? vprintk+0x4c/0x60
> > > [ 0.818350] ? rcu_torture_fwd_cb_hist.cold+0xe9/0xe9
> > > [ 0.818354] ? strict_work_handler+0x70/0x70
> > > [ 0.818357] rcu_torture_init+0x18be/0x199e
> > > [ 0.818361] ? srcu_init+0x133/0x133
> > > [ 0.818364] ? __mutex_unlock_slowpath.isra.0+0x270/0x270
> > > [ 0.818368] ? rcu_torture_barrier1cb+0x40/0x40
> > > [ 0.818371] ? rcu_torture_barrier1cb+0x40/0x40
> > > [ 0.818374] ? srcu_init+0x133/0x133
> > > [ 0.818377] do_one_initcall+0xb3/0x300
> > > [ 0.818380] ? initcall_blacklisted+0x150/0x150
> > > [ 0.818382] ? parameq+0x70/0x90
> > > [ 0.818385] ? __kasan_check_read+0x11/0x20
> > > [ 0.818389] kernel_init_freeable+0x2b2/0x310
> > > [ 0.818392] ? rest_init+0xf0/0xf0
> > > [ 0.818396] kernel_init+0x1e/0x140
> > > [ 0.818399] ret_from_fork+0x22/0x30
> > > [ 0.818402] </TASK>
> > > [ 0.818403] ---[ end trace 0000000000000000 ]---
> > > [ 0.818405] ------------[ cut here ]------------
> > > [ 0.818405] ODEBUG: active_state active (active state 1) object type: rcu_head hint: 0x0
> > > [ 0.818421] WARNING: CPU: 1 PID: 1 at lib/debugobjects.c:505 debug_print_object+0xd8/0xf0
> > > [ 0.818424] Modules linked in:
> > > [ 0.818426] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.18.0-rc6-next-20220511-yoctodev-standard+ #75
> > > [ 0.818428] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> > > [ 0.818430] RIP: 0010:debug_print_object+0xd8/0xf0
> > > [ 0.818432] Code: dd 40 9e 03 9d e8 48 62 a2 ff 4d 89 f9 4d 89 e8 44 89 e1 48 8b 14 dd 40 9e 03 9d 4c 89 f6 48 c7 c7 c0 93 03 9d e8 f6 1a b1 00 <0f> f
> > > [ 0.818435] RSP: 0000:ffff88810033fac0 EFLAGS: 00010086
> > > [ 0.818437] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
> > > [ 0.818438] RDX: 0000000000000002 RSI: 0000000000000004 RDI: ffffed1020067f4a
> > > [ 0.818440] RBP: ffff88810033faf0 R08: ffffffff9b50d898 R09: fffffbfff3bf5c6d
> > > [ 0.818441] R10: 0000000000000003 R11: fffffbfff3bf5c6c R12: 0000000000000001
> > > [ 0.818443] R13: ffffffff9ce769a0 R14: ffffffff9d039820 R15: 0000000000000000
> > > [ 0.818445] FS: 0000000000000000(0000) GS:ffff888158880000(0000) knlGS:0000000000000000
> > > [ 0.818448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 0.818449] CR2: 0000000000000000 CR3: 000000017600e000 CR4: 00000000001506e0
> > > [ 0.818451] Call Trace:
> > > [ 0.818452] <TASK>
> > > [ 0.818453] debug_object_active_state+0x1d6/0x210
> > > [ 0.818456] ? debug_object_deactivate+0x210/0x210
> > > [ 0.818460] ? __kasan_check_write+0x14/0x20
> > > [ 0.818464] call_rcu+0xb7/0x1110
> > > [ 0.818466] ? vprintk+0x4c/0x60
> > > [ 0.818469] ? rcu_torture_fwd_cb_hist.cold+0xe9/0xe9
> > > [ 0.818472] ? strict_work_handler+0x70/0x70
> > > [ 0.818476] rcu_torture_init+0x18be/0x199e
> > > [ 0.818479] ? srcu_init+0x133/0x133
> > > [ 0.818482] ? __mutex_unlock_slowpath.isra.0+0x270/0x270
> > > [ 0.818486] ? rcu_torture_barrier1cb+0x40/0x40
> > > [ 0.818489] ? rcu_torture_barrier1cb+0x40/0x40
> > > [ 0.818492] ? srcu_init+0x133/0x133
> > > [ 0.818495] do_one_initcall+0xb3/0x300
> > > [ 0.818497] ? initcall_blacklisted+0x150/0x150
> > > [ 0.818500] ? parameq+0x70/0x90
> > > [ 0.818503] ? __kasan_check_read+0x11/0x20
> > > [ 0.818507] kernel_init_freeable+0x2b2/0x310
> > > [ 0.818510] ? rest_init+0xf0/0xf0
> > > [ 0.818513] kernel_init+0x1e/0x140
> > > [ 0.818515] ret_from_fork+0x22/0x30
> > > [ 0.818519] </TASK>
> > > [ 0.818520] ---[ end trace 0000000000000000 ]---
> > > [ 0.818521] rcu: call_rcu(): Double-freed CB 00000000e2817fcb->rcu_torture_leak_cb+0x0/0x10()!!! non-slab/vmalloc memory
> > >
> > >
> > > After apply this patch:
> > >
> > > [ 0.647048] ODEBUG: activate active (active state 0) object type: rcu_head hint: 0x0
> > > [ 0.647068] WARNING: CPU: 1 PID: 1 at lib/debugobjects.c:505 debug_print_object+0xd8/0xf0
> > > [ 0.647073] Modules linked in:
> > > [ 0.647075] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.18.0-rc6-next-20220511-yoctodev-standard+ #77
> > > [ 0.647078] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> > > [ 0.647080] RIP: 0010:debug_print_object+0xd8/0xf0
> > > [ 0.647083] Code: dd 80 9d 43 a2 e8 38 62 a2 ff 4d 89 f9 4d 89 e8 44 89 e1 48 8b 14 dd 80 9d 43 a2 4c 89 f6 48 c7 c7 00 93 43 a2 e8 f6 1a b1 00 <0f> 0b 83 05 7b 62f
> > > [ 0.647085] RSP: 0000:ffff88810033fad0 EFLAGS: 00010082
> > > [ 0.647088] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
> > > [ 0.647090] RDX: 0000000000000002 RSI: 0000000000000004 RDI: ffffed1020067f4c
> > > [ 0.647091] RBP: ffff88810033fb00 R08: ffffffffa090d898 R09: fffffbfff467586d
> > > [ 0.647093] R10: 0000000000000003 R11: fffffbfff467586c R12: 0000000000000000
> > > [ 0.647095] R13: ffffffffa22769a0 R14: ffffffffa24399c0 R15: 0000000000000000
> > > [ 0.647097] FS: 0000000000000000(0000) GS:ffff88815b880000(0000) knlGS:0000000000000000
> > > [ 0.647100] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [ 0.647102] CR2: 0000000000000000 CR3: 000000002f20e000 CR4: 00000000001506e0
> > > [ 0.647104] Call Trace:
> > > [ 0.647104] <TASK>
> > > [ 0.647106] debug_object_activate+0x2b8/0x300
> > > [ 0.647110] ? debug_object_assert_init+0x220/0x220
> > > [ 0.647114] ? __kasan_check_write+0x14/0x20
> > > [ 0.647118] call_rcu+0x98/0x1100
> > > [ 0.647121] ? vprintk+0x4c/0x60
> > > [ 0.647125] ? rcu_torture_fwd_cb_hist.cold+0xe9/0xe9
> > > [ 0.647129] ? strict_work_handler+0x50/0x50
> > > [ 0.647133] rcu_torture_init+0x18be/0x199e
> > > [ 0.647136] ? srcu_init+0x133/0x133
> > > [ 0.647140] ? __mutex_unlock_slowpath.isra.0+0x270/0x270
> > > [ 0.647144] ? rcu_torture_barrier1cb+0x40/0x40
> > > [ 0.647148] ? rcu_torture_barrier1cb+0x40/0x40
> > > [ 0.647151] ? srcu_init+0x133/0x133
> > > [ 0.647155] do_one_initcall+0xb3/0x300
> > > [ 0.647157] ? initcall_blacklisted+0x150/0x150
> > > [ 0.647160] ? parameq+0x70/0x90
> > > [ 0.647164] ? __kasan_check_read+0x11/0x20
> > > [ 0.647167] kernel_init_freeable+0x2b2/0x310
> > > [ 0.647171] ? rest_init+0xf0/0xf0
> > > [ 0.647174] kernel_init+0x1e/0x140
> > > [ 0.647177] ret_from_fork+0x22/0x30
> > > [ 0.647181] </TASK>
> > > [ 0.647182] ---[ end trace 0000000000000000 ]---
> > > [ 0.647184] rcu: call_rcu(): Double-freed CB 000000009a684b70->rcu_torture_leak_cb+0x0/0x10()!!! non-slab/vmalloc memory
> >
> > >Very good, and thank you!
> > >
> > >Now suppose that someone passes a pointer to call_rcu(), but then invokes kfree() on that same object before the grace period ends.
> > >Is the offending kfree() flagged?
> > >
> > >If the CONFIG_DEBUG_OBJECTS_FREE is enabled, the debug_check_no_obj_freed() will check wether the object is activated in kfree() If is activated, also output callstack.
> > >
> > >__debug_check_no_obj_freed()
> > >{........
> > > switch (obj->state) {
> > > case ODEBUG_STATE_ACTIVE:
> > > descr = obj->descr;
> > > state = obj->state;
> > > _spin_unlock_irqrestore(&db->lock, flags);
> > > debug_print_object(obj, "free");
> > > }
> > >.........
> > >}
> > >
> > >Hi Paul
> > >
> > >The __debug_check_no_obj_freed() only check obj->state, don't care obj->astate, the debug_object_active_state() is not necessary. If CONFIG_DEBUG_OBJECTS_FREE is not enabled, the kfree() will directly release it without check obj state.
> > >
> > >Any thoughts?
> > >
> > >Thanks,
> > >Zqiang
> >
> > Hi Paul
> >
> > Sorry to bother you again, I think this change is still meaningful,
> > or there is something I don't konw if I can give you some suggestions, I will be happy to accept.
>
> >My concern with this patch is that there might be some odd scenario
> somewhere in which valuable debugging information is lost.
> Unfortunately,
> >I haven't had time to fully explore the space of possible sequences
> >of double-free and use-after-free bugs.
> >
> >It -might- be OK, but I cannot prove it. Thoughts?
>
> If CONFIG_DEBUG_OBJECTS_FREE is disabled, invokes kfree() to release
> pointer before the grace period ends,
> kfree() will directly to release it, there are not call debug_check_no_obj_freed() to check this debug-object corresponding to this pointer, when this pointer is checked before call RCU callback func, the debug_object_active_state() and debug_object_activate() is not trigger warnings. because this object state is correct.
>
>
> However, if CONFIG_DEBUG_OBJECTS_FREE is enabled, when invokes kfree() to release pointer before the grace period ends.
> We only check the state of the object(obj->state is set by debug_object_activate()) corresponding to this pointer, the obj->astate Is not be checked, That's is one reason I remove debug_object_active_state(), and I found that few modules use this function.
>
> Now there is another problem, set CONFIG_DEBUG_OBJECTS_FREE and CONFIG_DEBUG_OBJECTS_RCU_HEAD is enabled I did a simple test like this:
>
> struct rcu_head *rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
> preempt_disable();
> rcu_read_lock();
> local_irq_disable();
> if (rhp) {
> call_rcu(rhp, rcu_torture_err_cb);
> }
> local_irq_enable();
> rcu_read_unlock();
> preempt_enable();
> kfree(rhp);
>
> the follow warning are triggered,
>
> ODEBUG: free active (active state 1) object type: rcu_head hint: 0x0
> [ 1.255220] debug_check_no_obj_freed+0x248/0x280
> [ 1.255238] kfree+0x12d/0x610
> [ 1.255253] rcu_torture_init+0x16e1/0x1741
> [ 1.255305] do_one_initcall+0xe5/0x440
> [ 1.255349] kernel_init_freeable+0x342/0x3a0
> [ 1.255366] kernel_init+0x1e/0x140
> [ 1.255373] ret_from_fork+0x22/0x30
>
> The code shows that if obj->state is always STATE_ACTIVE, there will be a loop, until rcu callback is invoked set this obj->state = STATE_INACTIVE. after that this loop ends. If we invoke kfree() in preempt_disable/enable() critical sections before grace period ends, it may be trigger RCU Stall. So maybe we should add fixup_free functions to rcuhead_debug_descr, In fixup_free function, set obj->state is STATE_INACTIVE and set rcu_callback func is rcu_leak_callback() to fix this problem.
>
> static void __debug_check_no_obj_freed(const void *address, unsigned long size) {
> .. ........................
> for (;chunks > 0; chunks--, paddr += ODEBUG_CHUNK_SIZE) {
> db = get_bucket(paddr);
>
> repeat:
> cnt = 0;
> raw_spin_lock_irqsave(&db->lock, flags);
> hlist_for_each_entry_safe(obj, tmp, &db->list, node) {
> cnt++;
> oaddr = (unsigned long) obj->object;
> if (oaddr < saddr || oaddr >= eaddr)
> continue;
>
> switch (obj->state) {
> case ODEBUG_STATE_ACTIVE:
> descr = obj->descr;
> state = obj->state;
> raw_spin_unlock_irqrestore(&db->lock, flags);
> debug_print_object(obj, "free");
> debug_object_fixup(descr->fixup_free,
> (void *) oaddr, state);
> goto repeat; ...............................
> }
>
>One thing to keep in mind is that if the kernel reports a major bug such as double free or use after free, there are limits to how much work should be put into keeping the kernel limping along after that. So reporting the first failure is very important, but reporting second and subsequent failures is only "nice to have".
Thanks, I hadn't thought about this before, now ,I agree with this view point.
>
>At this point, my thought is to leave the code as it is.
Agree
Thanks
Zqiang
>
>Or am I missing some additional breakage with the current setup?
>
>
> Thanx, Paul
> Thanks
> Zqiang
>
>
> > Thanx, Paul
>
> > Thanks
> > Zqiang
> >
> >
> > >Thanks,
> > >Zqiang
> >
> > >
> > > Thanx, Paul
> >
> > > Thanks,
> > > Zqiang
> > >
> > >
> > >
> > > > Thanx, Paul
> > > >
> > > > ---
> > > > kernel/rcu/rcu.h | 13 +------------
> > > > 1 file changed, 1 insertion(+), 12 deletions(-)
> > > >
> > > > diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h index
> > > > 15b96f990774..0604ecd16627 100644
> > > > --- a/kernel/rcu/rcu.h
> > > > +++ b/kernel/rcu/rcu.h
> > > > @@ -179,27 +179,16 @@ static inline unsigned long rcu_seq_diff(unsigned long new, unsigned long old)
> > > > */
> > > >
> > > > #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
> > > > -# define STATE_RCU_HEAD_READY 0
> > > > -# define STATE_RCU_HEAD_QUEUED 1
> > > >
> > > > extern const struct debug_obj_descr rcuhead_debug_descr;
> > > >
> > > > static inline int debug_rcu_head_queue(struct rcu_head *head) {
> > > > - int r1;
> > > > -
> > > > - r1 = debug_object_activate(head, &rcuhead_debug_descr);
> > > > - debug_object_active_state(head, &rcuhead_debug_descr,
> > > > - STATE_RCU_HEAD_READY,
> > > > - STATE_RCU_HEAD_QUEUED);
> > > > - return r1;
> > > > + return debug_object_activate(head, &rcuhead_debug_descr);
> > > > }
> > > >
> > > > static inline void debug_rcu_head_unqueue(struct rcu_head *head) {
> > > > - debug_object_active_state(head, &rcuhead_debug_descr,
> > > > - STATE_RCU_HEAD_QUEUED,
> > > > - STATE_RCU_HEAD_READY);
> > > > debug_object_deactivate(head, &rcuhead_debug_descr); }
> > > > #else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
> > > > --
> > > > 2.25.1
> > > >
Powered by blists - more mailing lists