| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220618123035.563070-4-mail@conchuod.ie>
Date: Sat, 18 Jun 2022 13:30:25 +0100
From: Conor Dooley <mail@...chuod.ie>
To: David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>,
Vinod Koul <vkoul@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Serge Semin <fancer.lancer@...il.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Palmer Dabbelt <palmer@...belt.com>,
Palmer Dabbelt <palmer@...osinc.com>
Cc: Thomas Gleixner <tglx@...utronix.de>,
Paul Walmsley <paul.walmsley@...ive.com>,
Albert Ou <aou@...s.berkeley.edu>,
Conor Dooley <conor.dooley@...rochip.com>,
Masahiro Yamada <masahiroy@...nel.org>,
Damien Le Moal <damien.lemoal@...nsource.wdc.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Niklas Cassel <niklas.cassel@....com>,
Dillon Min <dillon.minfei@...il.com>,
Heng Sia <jee.heng.sia@...el.com>,
Jose Abreu <joabreu@...opsys.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, dmaengine@...r.kernel.org,
alsa-devel@...a-project.org, linux-spi@...r.kernel.org,
linux-riscv@...ts.infradead.org
Subject: [PATCH 03/14] ASoC: dt-bindings: convert designware-i2s to dt-schema
From: Conor Dooley <conor.dooley@...rochip.com>
Convert the Synopsys DesignWare I2S controller binding to dt-schema.
There was no listed maintainer but Jose Abreu was the last editor of the
txt binding so add him as maintainer.
Signed-off-by: Conor Dooley <conor.dooley@...rochip.com>
---
.../bindings/sound/designware-i2s.txt | 35 -------
.../bindings/sound/snps,designware-i2s.yaml | 93 +++++++++++++++++++
2 files changed, 93 insertions(+), 35 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/designware-i2s.txt
create mode 100644 Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
deleted file mode 100644
index 6a536d570e29..000000000000
--- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-DesignWare I2S controller
-
-Required properties:
- - compatible : Must be "snps,designware-i2s"
- - reg : Must contain the I2S core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's
- clocks. The controller expects one clock: the clock used as the sampling
- rate reference clock sample.
- - clock-names : "i2sclk" for the sample rate reference clock.
- - dmas: Pairs of phandle and specifier for the DMA channels that are used by
- the core. The core expects one or two dma channels: one for transmit and
- one for receive.
- - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
-
-Optional properties:
- - interrupts: The interrupt line number for the I2S controller. Add this
- parameter if the I2S controller that you are using does not support DMA.
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
-properties please check:
- * resource-names.txt
- * clock/clock-bindings.txt
- * dma/dma.txt
-
-Example:
-
- soc_i2s: i2s@...90000 {
- compatible = "snps,designware-i2s";
- reg = <0x0 0x7ff90000 0x0 0x1000>;
- clocks = <&scpi_i2sclk 0>;
- clock-names = "i2sclk";
- #sound-dai-cells = <0>;
- dmas = <&dma0 5>;
- dma-names = "tx";
- };
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
new file mode 100644
index 000000000000..5ac9c00157bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare I2S controller
+
+maintainers:
+ - Jose Abreu <joabreu@...opsys.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: canaan,k210-i2s
+ - const: snps,designware-i2s
+ - enum:
+ - snps,designware-i2s
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ The interrupt line number for the I2S controller. Add this
+ parameter if the I2S controller that you are using does not
+ support DMA.
+ maxItems: 1
+
+ clocks:
+ description: Sampling rate reference clock
+
+ clock-names:
+ const: i2sclk
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+ minItems: 1
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+ minItems: 1
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: canaan,k210-i2s
+
+then:
+ properties:
+ "#sound-dai-cells":
+ const: 1
+
+else:
+ properties:
+ "#sound-dai-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+oneOf:
+ - required:
+ - dmas
+ - dma-names
+ - required:
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ soc_i2s: i2s@...90000 {
+ compatible = "snps,designware-i2s";
+ reg = <0x7ff90000 0x1000>;
+ clocks = <&scpi_i2sclk 0>;
+ clock-names = "i2sclk";
+ #sound-dai-cells = <0>;
+ dmas = <&dma0 5>;
+ dma-names = "tx";
+ };
--
2.36.1
Powered by blists - more mailing lists