| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220620200644.1961936-5-aidanmacdonald.0x0@gmail.com>
Date: Mon, 20 Jun 2022 21:05:59 +0100
From: Aidan MacDonald <aidanmacdonald.0x0@...il.com>
To: broonie@...nel.org
Cc: agross@...nel.org, bjorn.andersson@...aro.org,
srinivas.kandagatla@...aro.org, bgoswami@...eaurora.org,
gregkh@...uxfoundation.org, rafael@...nel.org,
cw00.choi@...sung.com, krzysztof.kozlowski@...aro.org,
b.zolnierkie@...sung.com, myungjoo.ham@...sung.com,
michael@...le.cc, linus.walleij@...aro.org, brgl@...ev.pl,
tglx@...utronix.de, maz@...nel.org, lee.jones@...aro.org,
mani@...nel.org, cristian.ciocaltea@...il.com, wens@...e.org,
tharvey@...eworks.com, rjones@...eworks.com,
mazziesaccount@...il.com, orsonzhai@...il.com,
baolin.wang7@...il.com, zhang.lyra@...il.com,
jernej.skrabec@...il.com, samuel@...lland.org, lgirdwood@...il.com,
perex@...ex.cz, tiwai@...e.com, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-actions@...ts.infradead.org,
linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
alsa-devel@...a-project.org
Subject: [PATCH 04/49] regmap-irq: Introduce config registers for irq types
Config registers provide a more uniform approach to handling irq type
registers. They are essentially an extension of the virtual registers
used by the qcom-pm8008 driver.
Config registers can be represented as a 2D array:
config_base[0] reg0,0 reg0,1 reg0,2 reg0,3
config_base[1] reg1,0 reg1,1 reg1,2 reg1,3
config_base[2] reg2,0 reg2,1 reg2,2 reg2,3
There are 'num_config_bases' base registers, each of which is used to
address 'num_config_regs' registers. The addresses are calculated in
the same way as for other bases. It is assumed that an irq's type is
controlled by one column of registers; that column is identified by
the irq's 'type_reg_offset'.
The set_type_config() callback is responsible for updating the config
register contents. It receives an array of buffers (each represents a
row of registers) and the index of the column to update, along with
the 'struct regmap_irq' description and requested irq type.
Buffered values are written to registers in regmap_irq_sync_unlock().
Note that the entire register contents are overwritten, which is a
minor change in behavior from type registers via 'type_base'.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@...il.com>
---
drivers/base/regmap/regmap-irq.c | 102 ++++++++++++++++++++++++++++++-
include/linux/regmap.h | 12 ++++
2 files changed, 113 insertions(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 59cfd4000e63..be35f2e41b8c 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -39,6 +39,7 @@ struct regmap_irq_chip_data {
unsigned int *type_buf;
unsigned int *type_buf_def;
unsigned int **virt_buf;
+ unsigned int **config_buf;
unsigned int irq_reg_stride;
unsigned int type_reg_stride;
@@ -231,6 +232,17 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
}
}
+ for (i = 0; i < d->chip->num_config_bases; i++) {
+ for (j = 0; j < d->chip->num_config_regs; j++) {
+ reg = sub_irq_reg(d, d->chip->config_base[i], j);
+ ret = regmap_write(map, reg, d->config_buf[i][j]);
+ if (ret != 0)
+ dev_err(d->map->dev,
+ "Failed to write config %x: %d\n",
+ reg, ret);
+ }
+ }
+
if (d->chip->runtime_pm)
pm_runtime_put(map->dev);
@@ -298,6 +310,10 @@ static int regmap_irq_set_type(struct irq_data *data, unsigned int type)
reg = t->type_reg_offset / map->reg_stride;
+ if (d->chip->set_type_config)
+ return d->chip->set_type_config(d->config_buf, type,
+ irq_data, reg);
+
if (t->type_reg_mask)
d->type_buf[reg] &= ~t->type_reg_mask;
else
@@ -603,6 +619,62 @@ static const struct irq_domain_ops regmap_domain_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
+/**
+ * regmap_irq_set_type_config_simple() - Simple IRQ type configuration callback.
+ *
+ * @buf: Buffer containing configuration register values, this is a 2D array of
+ * `num_config_bases` rows, each of `num_config_regs` elements.
+ * @type: The requested IRQ type.
+ * @irq_data: The IRQ being configured.
+ * @idx: Index of the irq's config registers within each array `buf[i]`
+ *
+ * This is a &struct regmap_irq_chip->set_type_config callback suitable for
+ * chips with one config register. Register values are updated according to
+ * the &struct regmap_irq_type data associated with an IRQ.
+ */
+int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type,
+ const struct regmap_irq *irq_data, int idx)
+{
+ const struct regmap_irq_type *t = &irq_data->type;
+
+ if (t->type_reg_mask)
+ buf[0][idx] &= ~t->type_reg_mask;
+ else
+ buf[0][idx] &= ~(t->type_falling_val |
+ t->type_rising_val |
+ t->type_level_low_val |
+ t->type_level_high_val);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_FALLING:
+ buf[0][idx] |= t->type_falling_val;
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ buf[0][idx] |= t->type_rising_val;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ buf[0][idx] |= (t->type_falling_val |
+ t->type_rising_val);
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ buf[0][idx] |= t->type_level_high_val;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ buf[0][idx] |= t->type_level_low_val;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(regmap_irq_set_type_config_simple);
+
/**
* regmap_add_irq_chip_fwnode() - Use standard regmap IRQ controller handling
*
@@ -728,6 +800,24 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
}
}
+ if (chip->num_config_bases && chip->num_config_regs) {
+ /*
+ * Create config_buf[num_config_bases][num_config_regs]
+ */
+ d->config_buf = kcalloc(chip->num_config_bases,
+ sizeof(*d->config_buf), GFP_KERNEL);
+ if (!d->config_buf)
+ goto err_alloc;
+
+ for (i = 0; i < chip->num_config_regs; i++) {
+ d->config_buf[i] = kcalloc(chip->num_config_regs,
+ sizeof(unsigned int),
+ GFP_KERNEL);
+ if (!d->config_buf[i])
+ goto err_alloc;
+ }
+ }
+
d->irq_chip = regmap_irq_chip;
d->irq_chip.name = chip->name;
d->irq = irq;
@@ -904,6 +994,11 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
kfree(d->virt_buf[i]);
kfree(d->virt_buf);
}
+ if (d->config_buf) {
+ for (i = 0; i < chip->num_config_bases; i++)
+ kfree(d->config_buf[i]);
+ kfree(d->config_buf);
+ }
kfree(d);
return ret;
}
@@ -944,7 +1039,7 @@ EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
{
unsigned int virq;
- int hwirq;
+ int i, hwirq;
if (!d)
return;
@@ -974,6 +1069,11 @@ void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
kfree(d->mask_buf);
kfree(d->status_reg_buf);
kfree(d->status_buf);
+ if (d->config_buf) {
+ for (i = 0; i < d->chip->num_config_bases; i++)
+ kfree(d->config_buf[i]);
+ kfree(d->config_buf);
+ }
kfree(d);
}
EXPORT_SYMBOL_GPL(regmap_del_irq_chip);
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 8952fa3d0d59..e48d65756fb4 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1460,6 +1460,7 @@ struct regmap_irq_sub_irq_map {
* @wake_base: Base address for wake enables. If zero unsupported.
* @type_base: Base address for irq type. If zero unsupported.
* @virt_reg_base: Base addresses for extra config regs.
+ * @config_base: Base address for IRQ type config regs. If null unsupported.
* @irq_reg_stride: Stride to use for chips where registers are not contiguous.
* @init_ack_masked: Ack all masked interrupts once during initalization.
* @mask_invert: Inverted mask register: cleared bits are masked out.
@@ -1489,12 +1490,15 @@ struct regmap_irq_sub_irq_map {
* If zero unsupported.
* @type_reg_stride: Stride to use for chips where type registers are not
* contiguous.
+ * @num_config_bases: Number of config base registers.
+ * @num_config_regs: Number of config registers for each config base register.
* @handle_pre_irq: Driver specific callback to handle interrupt from device
* before regmap_irq_handler process the interrupts.
* @handle_post_irq: Driver specific callback to handle interrupt from device
* after handling the interrupts in regmap_irq_handler().
* @set_type_virt: Driver specific callback to extend regmap_irq_set_type()
* and configure virt regs.
+ * @set_type_config: Callback used for configuring irq types.
* @irq_drv_data: Driver specific IRQ data which is passed as parameter when
* driver specific pre/post interrupt handler is called.
*
@@ -1517,6 +1521,7 @@ struct regmap_irq_chip {
unsigned int wake_base;
unsigned int type_base;
unsigned int *virt_reg_base;
+ const unsigned int *config_base;
unsigned int irq_reg_stride;
bool mask_writeonly:1;
bool init_ack_masked:1;
@@ -1539,17 +1544,24 @@ struct regmap_irq_chip {
int num_type_reg;
int num_virt_regs;
+ int num_config_bases;
+ int num_config_regs;
unsigned int type_reg_stride;
int (*handle_pre_irq)(void *irq_drv_data);
int (*handle_post_irq)(void *irq_drv_data);
int (*set_type_virt)(unsigned int **buf, unsigned int type,
unsigned long hwirq, int reg);
+ int (*set_type_config)(unsigned int **buf, unsigned int type,
+ const struct regmap_irq *irq_data, int idx);
void *irq_drv_data;
};
struct regmap_irq_chip_data;
+int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type,
+ const struct regmap_irq *irq_data, int idx);
+
int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
int irq_base, const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data);
--
2.35.1
Powered by blists - more mailing lists