linux-kernel - Re: [PATCH v4 2/2] arm64: dts: ti: am625-sk: Add audio output support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 20 Jun 2022 16:05:01 +0530
From:   Jai Luthra <j-luthra@...com>
To:     Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC:     <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>,
        Jayesh Choudhary <j-choudhary@...com>,
        Jai Luthra <j-luthra@...com>
Subject: Re: [PATCH v4 2/2] arm64: dts: ti: am625-sk: Add audio output support

On 15:57-20220620, Jai Luthra wrote:
> Add nodes for audio codec and sound card, enable the audio serializer
> (McASP1) under use and update pinmux. Disable all other McASP nodes.
> 
> Audio input is currently not working properly, so the RX port on McASP1
> is disabled for now, until the issue is debugged.
> 
> The serializer is shared between HDMI and codec. By default codec is
> used for output, but it can be toggled to HDMI using a FET switch
> connected to the MCASP1_FET_SEL (J24) header on the board.
> 
> Signed-off-by: Jai Luthra <j-luthra@...com>
> ---
>  arch/arm64/boot/dts/ti/k3-am625-sk.dts | 89 ++++++++++++++++++++++++++
>  1 file changed, 89 insertions(+)

Oops, I sent this patch twice in the series. Please ignore this one.

Thanks,
Jai