linux-kernel - Re: [PATCH 4/4] Bluetooth: hci_bcm: Increase host baudrate for CYW55572 in autobaud mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1a554d8e-c479-f646-ce9d-25871affbcee@molgen.mpg.de>
Date:   Mon, 20 Jun 2022 14:21:18 +0200
From:   Paul Menzel <pmenzel@...gen.mpg.de>
To:     Hakan Jansson <hakan.jansson@...ineon.com>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Marcel Holtmann <marcel@...tmann.org>,
        Johan Hedberg <johan.hedberg@...il.com>,
        Luiz Augusto von Dentz <luiz.dentz@...il.com>,
        linux-bluetooth@...r.kernel.org
Subject: Re: [PATCH 4/4] Bluetooth: hci_bcm: Increase host baudrate for
 CYW55572 in autobaud mode

[Your To: header field has:

     To:     unlisted-recipients:; (no To-header on input)

which is added to the receiver list when replying to all in Mozilla 
Thunderbird 91.10.0.
]


Dear Hakan,


Am 20.06.22 um 14:01 schrieb Hakan Jansson:
> Add device specific data for max baudrate in autobaud mode. This allows the
> host to use a baudrate higher than "init speed" when loading FW in autobaud
> mode.

Please mention 921600 in the commit message, and maybe also document 
what the current default is.

Please also add the measurement data to the commit message, that means, 
how much is the time to load the firmware decreased.

> 
> Signed-off-by: Hakan Jansson <hakan.jansson@...ineon.com>
> ---
>   drivers/bluetooth/hci_bcm.c | 20 ++++++++++++++++----
>   1 file changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
> index 0ae627c293c5..d7e0b75db8a6 100644
> --- a/drivers/bluetooth/hci_bcm.c
> +++ b/drivers/bluetooth/hci_bcm.c
> @@ -53,10 +53,12 @@
>    * struct bcm_device_data - device specific data
>    * @no_early_set_baudrate: Disallow set baudrate before driver setup()
>    * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it
> + * @max_autobaud_speed: max baudrate supported by device in autobaud mode
>    */
>   struct bcm_device_data {
>   	bool	no_early_set_baudrate;
>   	bool	drive_rts_on_open;
> +	u32	max_autobaud_speed;

Why specify the length, and not just `unsigned int`? Maybe also add the 
unit to the variable name?

>   };
>   
>   /**
> @@ -100,6 +102,7 @@ struct bcm_device_data {
>    * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it
>    * @pcm_int_params: keep the initial PCM configuration
>    * @use_autobaud_mode: start Bluetooth device in autobaud mode
> + * @max_autobaud_speed: max baudrate supported by device in autobaud mode
>    */
>   struct bcm_device {
>   	/* Must be the first member, hci_serdev.c expects this. */
> @@ -139,6 +142,7 @@ struct bcm_device {
>   	bool			drive_rts_on_open;
>   	bool			use_autobaud_mode;
>   	u8			pcm_int_params[5];
> +	u32			max_autobaud_speed;

Ditto.

>   };
>   
>   /* generic bcm uart resources */
> @@ -479,7 +483,10 @@ static int bcm_open(struct hci_uart *hu)
>   		else if (bcm->dev->drive_rts_on_open)
>   			hci_uart_set_flow_control(hu, true);
>   
> -		hu->init_speed = bcm->dev->init_speed;
> +		if (bcm->dev->use_autobaud_mode && bcm->dev->max_autobaud_speed)
> +			hu->init_speed = min(bcm->dev->oper_speed, bcm->dev->max_autobaud_speed);
> +		else
> +			hu->init_speed = bcm->dev->init_speed;
>   
>   		/* If oper_speed is set, ldisc/serdev will set the baudrate
>   		 * before calling setup()
> @@ -585,8 +592,8 @@ static int bcm_setup(struct hci_uart *hu)
>   		return 0;
>   
>   	/* Init speed if any */
> -	if (hu->init_speed)
> -		speed = hu->init_speed;
> +	if (bcm->dev && bcm->dev->init_speed)
> +		speed = bcm->dev->init_speed;
>   	else if (hu->proto->init_speed)
>   		speed = hu->proto->init_speed;
>   	else
> @@ -1519,6 +1526,7 @@ static int bcm_serdev_probe(struct serdev_device *serdev)
>   
>   	data = device_get_match_data(bcmdev->dev);
>   	if (data) {
> +		bcmdev->max_autobaud_speed = data->max_autobaud_speed;
>   		bcmdev->no_early_set_baudrate = data->no_early_set_baudrate;
>   		bcmdev->drive_rts_on_open = data->drive_rts_on_open;
>   	}
> @@ -1542,6 +1550,10 @@ static struct bcm_device_data bcm43438_device_data = {
>   	.drive_rts_on_open = true,
>   };
>   
> +static struct bcm_device_data cyw55572_device_data = {
> +	.max_autobaud_speed = 921600,
> +};
> +
>   static const struct of_device_id bcm_bluetooth_of_match[] = {
>   	{ .compatible = "brcm,bcm20702a1" },
>   	{ .compatible = "brcm,bcm4329-bt" },
> @@ -1554,7 +1566,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = {
>   	{ .compatible = "brcm,bcm4349-bt", .data = &bcm43438_device_data },
>   	{ .compatible = "brcm,bcm43540-bt", .data = &bcm4354_device_data },
>   	{ .compatible = "brcm,bcm4335a0" },
> -	{ .compatible = "infineon,cyw55572-bt" },
> +	{ .compatible = "infineon,cyw55572-bt", .data = &cyw55572_device_data },
>   	{ },
>   };
>   MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);


Kind regards,

Paul