[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220621115603.yzcxcu7gzwng6bcg@skbuf>
Date: Tue, 21 Jun 2022 14:56:03 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Clément Léger <clement.leger@...tlin.com>
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Jose Abreu <joabreu@...opsys.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Herve Codina <herve.codina@...tlin.com>,
Miquèl Raynal <miquel.raynal@...tlin.com>,
Milan Stevanovic <milan.stevanovic@...com>,
Jimmy Lalande <jimmy.lalande@...com>,
Pascal Eberhard <pascal.eberhard@...com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [PATCH net-next v8 15/16] ARM: dts: r9a06g032-rzn1d400-db: add
switch description
On Mon, Jun 20, 2022 at 01:08:45PM +0200, Clément Léger wrote:
> Add description for the switch, GMAC2 and MII converter. With these
> definitions, the switch port 0 and 1 (MII port 5 and 4) are working on
> RZ/N1D-DB board.
>
> Signed-off-by: Clément Léger <clement.leger@...tlin.com>
> ---
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
Just minor comments below:
> arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 117 ++++++++++++++++++++
> 1 file changed, 117 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> index 3f8f3ce87e12..36b898d9f115 100644
> --- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> @@ -8,6 +8,8 @@
>
> /dts-v1/;
>
> +#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
> +#include <dt-bindings/net/pcs-rzn1-miic.h>
> #include "r9a06g032.dtsi"
>
> / {
> @@ -31,3 +33,118 @@ &wdt0 {
> timeout-sec = <60>;
> status = "okay";
> };
> +
> +&gmac2 {
> + status = "okay";
> + phy-mode = "gmii";
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> +};
> +
> +&switch {
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pins_mdio1>, <&pins_eth3>, <&pins_eth4>;
> +
> + dsa,member = <0 0>;
This doesn't really have any value for single-switch DSA trees, since
that is the implicit tree id/switch id, but it doesn't hurt, either.
> +
> + mdio {
> + clock-frequency = <2500000>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + switch0phy4: ethernet-phy@4{
Space between ethernet-phy@4 and {.
> + reg = <4>;
> + micrel,led-mode = <1>;
> + };
> +
> + switch0phy5: ethernet-phy@5{
Same thing here.
> + reg = <5>;
> + micrel,led-mode = <1>;
> + };
> + };
> +};
> +
> +&switch_port0 {
> + label = "lan0";
> + phy-mode = "mii";
> + phy-handle = <&switch0phy5>;
> + status = "okay";
> +};
> +
> +&switch_port1 {
> + label = "lan1";
> + phy-mode = "mii";
> + phy-handle = <&switch0phy4>;
> + status = "okay";
> +};
> +
> +&switch_port4 {
> + status = "okay";
> +};
> +
> +ð_miic {
> + status = "okay";
> + renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
> +};
> +
> +&mii_conv4 {
> + renesas,miic-input = <MIIC_SWITCH_PORTB>;
> + status = "okay";
> +};
> +
> +&mii_conv5 {
> + renesas,miic-input = <MIIC_SWITCH_PORTA>;
> + status = "okay";
> +};
> +
> +&pinctrl{
> + pins_mdio1: pins_mdio1 {
> + pinmux = <
> + RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)
> + RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)
> + >;
> + };
> + pins_eth3: pins_eth3 {
> + pinmux = <
> + RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + >;
> + drive-strength = <6>;
> + bias-disable;
> + };
> + pins_eth4: pins_eth4 {
> + pinmux = <
> + RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)
> + >;
> + drive-strength = <6>;
> + bias-disable;
> + };
> +};
> --
> 2.36.1
>
Powered by blists - more mailing lists