[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c05ac6d9-92cc-8c47-9665-dfc5332b860a@xs4all.nl>
Date: Tue, 21 Jun 2022 14:22:21 +0200
From: Hans Verkuil <hverkuil@...all.nl>
To: Eugen.Hristev@...rochip.com
Cc: linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Claudiu.Beznea@...rochip.com, Nicolas.Ferre@...rochip.com,
jacopo@...ndi.org
Subject: Re: [PATCH v10 0/5] media: atmel: atmel-isc: implement media
controller
Hi Eugen,
On 6/15/22 13:06, Eugen.Hristev@...rochip.com wrote:
> On 5/3/22 12:51 PM, Eugen Hristev wrote:
>> This series is a split from the series :
>> [PATCH v9 00/13] media: atmel: atmel-isc: implement media controller
>> and it includes the media controller part.
>> previous fixes were sent on a different patch series.
>>
>> As discussed on the ML, moving forward with having the media link validate at
>> start/stop streaming call.
>> I will test the patch :
>> [RFC PATCHv2] vb2: add support for (un)prepare_streaming queue ops
>> afterwards, but that patch requires moving my logic to the new vb2 callbacks.
>>
>> Full series history:
>>
>> Changes in v10:
>> -> split the series into this first fixes part.
>> -> moved IO_MC addition from first patch to the second patch on the driver changes
>> -> edited commit messages
>> -> DT nodes now disabled by default.
>>
>> Changes in v9:
>> -> kernel robot reported isc_link_validate is not static, changed to static.
>>
>> Changes in v8:
>> -> scaler: modified crop bounds to have the exact source size
>>
>> Changes in v7:
>> -> scaler: modified crop bounds to have maximum isc size
>> -> format propagation: did small changes as per Jacopo review
>>
>>
>> Changes in v6:
>> -> worked a bit on scaler, added try crop and other changes as per Jacopo review
>> -> worked on isc-base enum_fmt , reworked as per Jacopo review
>>
>> Changes in v5:
>> -> removed patch that removed the 'stop' variable as it was still required
>> -> added two new trivial patches
>> -> reworked some parts of the scaler and format propagation after discussions with Jacopo
>>
>>
>> Changes in v4:
>> -> as reviewed by Hans, added new patch to remove the 'stop' variable and reworked
>> one patch that was using it
>> -> as reviewed by Jacopo, reworked some parts of the media controller implementation
>>
>>
>> Changes in v3:
>> - change in bindings, small fixes in csi2dc driver and conversion to mc
>> for the isc-base.
>> - removed some MAINTAINERS patches and used patterns in MAINTAINERS
>>
>> Changes in v2:
>> - integrated many changes suggested by Jacopo in the review of the v1 series.
>> - add a few new patches
>>
>> Eugen Hristev (5):
>> media: atmel: atmel-isc: prepare for media controller support
>> media: atmel: atmel-isc: implement media controller
>> ARM: dts: at91: sama7g5: add nodes for video capture
>> ARM: configs: at91: sama7: add xisc and csi2dc
>> ARM: multi_v7_defconfig: add atmel video pipeline modules
>>
>> arch/arm/boot/dts/sama7g5.dtsi | 51 ++
>> arch/arm/configs/multi_v7_defconfig | 3 +
>> arch/arm/configs/sama7_defconfig | 2 +
>> drivers/media/platform/atmel/Makefile | 2 +-
>> drivers/media/platform/atmel/atmel-isc-base.c | 485 +++++++++---------
>> .../media/platform/atmel/atmel-isc-scaler.c | 267 ++++++++++
>> drivers/media/platform/atmel/atmel-isc.h | 50 +-
>> .../media/platform/atmel/atmel-sama5d2-isc.c | 34 +-
>> .../media/platform/atmel/atmel-sama7g5-isc.c | 32 +-
>> 9 files changed, 685 insertions(+), 241 deletions(-)
>> create mode 100644 drivers/media/platform/atmel/atmel-isc-scaler.c
>>
>
>
> Hello Hans,
>
> What do you think about this series, does it require more work or
> changes until it could move further ? Anything in particular you would
> like me to try or test out ?
It's high on my todo list to look at this and see if anything else needs to
be done. I hope to get to this this week.
Regards,
Hans
>
> Thanks,
> Eugen
Powered by blists - more mailing lists