| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPY8ntCmov0OY3tBabf7ndSVCNgeYeSy+e4E0sdaW54zZpoauw@mail.gmail.com>
Date: Tue, 21 Jun 2022 16:46:21 +0100
From: Dave Stevenson <dave.stevenson@...pberrypi.com>
To: Adam Ford <aford173@...il.com>
Cc: Linux Media Mailing List <linux-media@...r.kernel.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
LKML <linux-kernel@...r.kernel.org>,
Adam Ford-BE <aford@...conembedded.com>
Subject: Re: [PATCH V2 1/2] media: i2c: imx219: Split common registers from
mode tables
Hi Adam
Thanks for the patch, and sorry it's taken me a few days to get to it.
On Thu, 16 Jun 2022 at 13:31, Adam Ford <aford173@...il.com> wrote:
>
> There are four modes, and each mode has a table of registers.
> Some of the registers are common to all modes, so create new
> tables for these common registers to reduce duplicate code.
>
> Signed-off-by: Adam Ford <aford173@...il.com>
> ---
> V2: Merge the PLL table into the common table instead of having
> two separate, common tables.
>
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index e10af3f74b38..a43eed143999 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -145,23 +145,60 @@ struct imx219_mode {
> struct imx219_reg_list reg_list;
> };
>
> -/*
> - * Register sets lifted off the i2C interface from the Raspberry Pi firmware
> - * driver.
> - * 3280x2464 = mode 2, 1920x1080 = mode 1, 1640x1232 = mode 4, 640x480 = mode 7.
> - */
> -static const struct imx219_reg mode_3280x2464_regs[] = {
> - {0x0100, 0x00},
> +/* To Access Addresses 3000-5fff, send the following commands */
> +static const struct imx219_reg imx219_common_regs[] = {
> + {0x0100, 0x00}, /* Mode Select */
> +
> + /* Access Command Sequence */
> {0x30eb, 0x0c},
> {0x30eb, 0x05},
> {0x300a, 0xff},
> {0x300b, 0xff},
> {0x30eb, 0x05},
> {0x30eb, 0x09},
> - {0x0114, 0x01},
> - {0x0128, 0x00},
> - {0x012a, 0x18},
> +
> + /* PLL Clock Table */
> + {0x0301, 0x05}, /* VTPXCK_DIV */
> + {0x0303, 0x01}, /* VTSYSCK_DIV */
> + {0x0304, 0x03}, /* PREPLLCK_VT_DIV 0x03 = AUTO set */
> + {0x0305, 0x03}, /* PREPLLCK_OP_DIV 0x03 = AUTO set */
> + {0x0306, 0x00}, /* PLL_VT_MPY */
> + {0x0307, 0x39},
> + {0x030b, 0x01}, /* OP_SYS_CLK_DIV */
> + {0x030c, 0x00}, /* PLL_OP_MPY */
> + {0x030d, 0x72},
> +
> + /* Undocumented registers */
> + {0x455e, 0x00},
> + {0x471e, 0x4b},
> + {0x4767, 0x0f},
> + {0x4750, 0x14},
> + {0x4540, 0x00},
> + {0x47b4, 0x14},
> + {0x4713, 0x30},
> + {0x478b, 0x10},
> + {0x478f, 0x10},
> + {0x4793, 0x10},
> + {0x4797, 0x0e},
> + {0x479b, 0x0e},
> +
> + /* Frame Bank Register Group "A" */
> + {0x0162, 0x0d}, /* Line_Length_A */
> + {0x0163, 0x78},
Registers 0x0170 and 0x171 for X_ODD_INC_A and Y_ODD_INC_A are also
common to all modes as 0x01. You could have modes with skipping, but
currently there are none.
> +
> + /* Output setup registers */
> + {0x0114, 0x01}, /* CSI 2-Lane Mode */
> + {0x0128, 0x00}, /* DPHY Auto Mode */
> + {0x012a, 0x18}, /* EXCK_Freq */
> {0x012b, 0x00},
> +};
> +
> +/*
> + * Register sets lifted off the i2C interface from the Raspberry Pi firmware
> + * driver.
> + * 3280x2464 = mode 2, 1920x1080 = mode 1, 1640x1232 = mode 4, 640x480 = mode 7.
> + */
> +static const struct imx219_reg mode_3280x2464_regs[] = {
> {0x0164, 0x00},
> {0x0165, 0x00},
> {0x0166, 0x0c},
> @@ -176,51 +213,15 @@ static const struct imx219_reg mode_3280x2464_regs[] = {
> {0x016f, 0xa0},
> {0x0170, 0x01},
> {0x0171, 0x01},
> - {0x0174, 0x00},
> + {0x0174, 0x00}, /* No-Binning */
> {0x0175, 0x00},
> - {0x0301, 0x05},
> - {0x0303, 0x01},
> - {0x0304, 0x03},
> - {0x0305, 0x03},
> - {0x0306, 0x00},
> - {0x0307, 0x39},
> - {0x030b, 0x01},
> - {0x030c, 0x00},
> - {0x030d, 0x72},
> {0x0624, 0x0c},
> {0x0625, 0xd0},
> {0x0626, 0x09},
> {0x0627, 0xa0},
> - {0x455e, 0x00},
> - {0x471e, 0x4b},
> - {0x4767, 0x0f},
> - {0x4750, 0x14},
> - {0x4540, 0x00},
> - {0x47b4, 0x14},
> - {0x4713, 0x30},
> - {0x478b, 0x10},
> - {0x478f, 0x10},
> - {0x4793, 0x10},
> - {0x4797, 0x0e},
> - {0x479b, 0x0e},
> - {0x0162, 0x0d},
> - {0x0163, 0x78},
> };
>
> static const struct imx219_reg mode_1920_1080_regs[] = {
> - {0x0100, 0x00},
> - {0x30eb, 0x05},
> - {0x30eb, 0x0c},
> - {0x300a, 0xff},
> - {0x300b, 0xff},
> - {0x30eb, 0x05},
> - {0x30eb, 0x09},
> - {0x0114, 0x01},
> - {0x0128, 0x00},
> - {0x012a, 0x18},
> - {0x012b, 0x00},
> - {0x0162, 0x0d},
> - {0x0163, 0x78},
> {0x0164, 0x02},
> {0x0165, 0xa8},
> {0x0166, 0x0a},
> @@ -235,47 +236,15 @@ static const struct imx219_reg mode_1920_1080_regs[] = {
> {0x016f, 0x38},
> {0x0170, 0x01},
> {0x0171, 0x01},
> - {0x0174, 0x00},
> + {0x0174, 0x00}, /* No-Binning */
> {0x0175, 0x00},
> - {0x0301, 0x05},
> - {0x0303, 0x01},
> - {0x0304, 0x03},
> - {0x0305, 0x03},
> - {0x0306, 0x00},
> - {0x0307, 0x39},
> - {0x030b, 0x01},
> - {0x030c, 0x00},
> - {0x030d, 0x72},
> {0x0624, 0x07},
> {0x0625, 0x80},
> {0x0626, 0x04},
> {0x0627, 0x38},
> - {0x455e, 0x00},
> - {0x471e, 0x4b},
> - {0x4767, 0x0f},
> - {0x4750, 0x14},
> - {0x4540, 0x00},
> - {0x47b4, 0x14},
> - {0x4713, 0x30},
> - {0x478b, 0x10},
> - {0x478f, 0x10},
> - {0x4793, 0x10},
> - {0x4797, 0x0e},
> - {0x479b, 0x0e},
> };
>
> static const struct imx219_reg mode_1640_1232_regs[] = {
> - {0x0100, 0x00},
> - {0x30eb, 0x0c},
> - {0x30eb, 0x05},
> - {0x300a, 0xff},
> - {0x300b, 0xff},
> - {0x30eb, 0x05},
> - {0x30eb, 0x09},
> - {0x0114, 0x01},
> - {0x0128, 0x00},
> - {0x012a, 0x18},
> - {0x012b, 0x00},
> {0x0164, 0x00},
> {0x0165, 0x00},
> {0x0166, 0x0c},
> @@ -290,51 +259,15 @@ static const struct imx219_reg mode_1640_1232_regs[] = {
> {0x016f, 0xd0},
> {0x0170, 0x01},
> {0x0171, 0x01},
> - {0x0174, 0x01},
> + {0x0174, 0x01}, /* x2-Binning */
> {0x0175, 0x01},
> - {0x0301, 0x05},
> - {0x0303, 0x01},
> - {0x0304, 0x03},
> - {0x0305, 0x03},
> - {0x0306, 0x00},
> - {0x0307, 0x39},
> - {0x030b, 0x01},
> - {0x030c, 0x00},
> - {0x030d, 0x72},
> {0x0624, 0x06},
> {0x0625, 0x68},
> {0x0626, 0x04},
> {0x0627, 0xd0},
> - {0x455e, 0x00},
> - {0x471e, 0x4b},
> - {0x4767, 0x0f},
> - {0x4750, 0x14},
> - {0x4540, 0x00},
> - {0x47b4, 0x14},
> - {0x4713, 0x30},
> - {0x478b, 0x10},
> - {0x478f, 0x10},
> - {0x4793, 0x10},
> - {0x4797, 0x0e},
> - {0x479b, 0x0e},
> - {0x0162, 0x0d},
> - {0x0163, 0x78},
> };
>
> static const struct imx219_reg mode_640_480_regs[] = {
> - {0x0100, 0x00},
> - {0x30eb, 0x05},
> - {0x30eb, 0x0c},
> - {0x300a, 0xff},
> - {0x300b, 0xff},
> - {0x30eb, 0x05},
> - {0x30eb, 0x09},
> - {0x0114, 0x01},
> - {0x0128, 0x00},
> - {0x012a, 0x18},
> - {0x012b, 0x00},
> - {0x0162, 0x0d},
> - {0x0163, 0x78},
> {0x0164, 0x03},
> {0x0165, 0xe8},
> {0x0166, 0x08},
> @@ -349,33 +282,12 @@ static const struct imx219_reg mode_640_480_regs[] = {
> {0x016f, 0xe0},
> {0x0170, 0x01},
> {0x0171, 0x01},
> - {0x0174, 0x03},
> + {0x0174, 0x03}, /* x2-analog binning */
> {0x0175, 0x03},
> - {0x0301, 0x05},
> - {0x0303, 0x01},
> - {0x0304, 0x03},
> - {0x0305, 0x03},
> - {0x0306, 0x00},
> - {0x0307, 0x39},
> - {0x030b, 0x01},
> - {0x030c, 0x00},
> - {0x030d, 0x72},
> {0x0624, 0x06},
> {0x0625, 0x68},
> {0x0626, 0x04},
> {0x0627, 0xd0},
> - {0x455e, 0x00},
> - {0x471e, 0x4b},
> - {0x4767, 0x0f},
> - {0x4750, 0x14},
> - {0x4540, 0x00},
> - {0x47b4, 0x14},
> - {0x4713, 0x30},
> - {0x478b, 0x10},
> - {0x478f, 0x10},
> - {0x4793, 0x10},
> - {0x4797, 0x0e},
> - {0x479b, 0x0e},
> };
>
> static const struct imx219_reg raw8_framefmt_regs[] = {
> @@ -1041,6 +953,13 @@ static int imx219_start_streaming(struct imx219 *imx219)
> if (ret < 0)
> return ret;
>
> + /* Send the Manufacturing Header common to all modes */
It's a table of common settings, not a manufacturing header.
s/Send the Manufacturing Header/Send all registers that are
Dave
> + ret = imx219_write_regs(imx219, imx219_common_regs, ARRAY_SIZE(imx219_common_regs));
> + if (ret) {
> + dev_err(&client->dev, "%s failed to send mfg header\n", __func__);
> + goto err_rpm_put;
> + }
> +
> /* Apply default values of current mode */
> reg_list = &imx219->mode->reg_list;
> ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs);
> --
> 2.34.1
>
Powered by blists - more mailing lists