linux-kernel - Re: [PATCH v11 0/3] Add basic node support for MediaTek MT8186 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <37fb545a-bc45-65b0-b67b-5ef1b0346777@gmail.com>
Date:   Wed, 22 Jun 2022 17:40:43 +0200
From:   Matthias Brugger <matthias.bgg@...il.com>
To:     Allen-KH Cheng <allen-kh.cheng@...iatek.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Cc:     Project_Global_Chrome_Upstream_Group@...iatek.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org,
        Chen-Yu Tsai <wenst@...omium.org>,
        Ryder Lee <ryder.lee@...nel.org>, hsinyi@...omium.org
Subject: Re: [PATCH v11 0/3] Add basic node support for MediaTek MT8186 SoC



On 20/05/2022 14:22, Allen-KH Cheng wrote:
> MT8186 is a SoC based on 64bit ARMv8 architecture.
> It contains 6 CA55 and 2 CA76 cores.
> MT8186 share many HW IP with MT65xx series.
> 
> This patchset was tested on MT8186 evaluation board to shell.
> 

Applied, thanks!

> Based on next-20220519, linux-next/master
> 
> changes since v9:
>   - remove some merged PATCHs from series
>   - reorder nodes in dts (cpu-map)
>   - remove okay status in auxadc
>   - remove unnecessary suffix node name for i2c
>   - add pwm node
>   - add dsi-phy node
>   - add dpi node
> 
> changes since v9:
>   - add one space before equal sign of drive-strength-adv
>   - corect compatible name for big cores (ca76)
>   - use upper case of address in pinctrl
>   - add pwrap node
>   - add pwm node
> 
> changes since v8:
>   - change name from pins_bus to pins-sda-scl
>   - correct email address
>   - add capacity-dmips-mhz for each CPU
>   - add ppi-partitions in gic node
>   - change name to power-domain
>   - remove status "okay" in scp node
>   - update timer and pericfg compatible in series
> 
> changes since v7:
>   - add scp&auxadc node
> 
> changes since v6:
>   - remove unnecessary blank line
> 
> changes since v5:
>   - replace Mediatek a to MediaTek
>   - use GPL-2.0-only OR BSD-2-Clause
> 
> changes since v4:
>   - correct driver clock of mt8186
>   - add power domains controller and clock controllers
>   - add pinctrl, usb host, spi and i2c nodes
>   - add node status in mt8186-evb.dts
>   - correct some dtbs_check warnings
> 
> changes since v3:
>   - remove serial, mmc and phy patch from series. (already merged)
>   - remove mcusysoff node
>   - move oscillator nodes at the head of dts
>   - change name from usb-phy to t-phy
> 
> changes since v2:
>   - add soc {} in mt8186.dtsi
> 
> changes since v1:
>   - add dt-bindings: arm: Add compatible for MediaTek MT8186
> 
> Allen-KH Cheng (3):
>    dt-bindings: arm: mediatek: Add mt8186 pericfg compatible
>    dt-bindings: arm: Add compatible for MediaTek MT8186
>    arm64: dts: Add MediaTek SoC MT8186 dts and evaluation board and
>      Makefile
> 
>   .../devicetree/bindings/arm/mediatek.yaml     |    4 +
>   .../arm/mediatek/mediatek,pericfg.yaml        |    1 +
>   arch/arm64/boot/dts/mediatek/Makefile         |    1 +
>   arch/arm64/boot/dts/mediatek/mt8186-evb.dts   |  232 ++++
>   arch/arm64/boot/dts/mediatek/mt8186.dtsi      | 1016 +++++++++++++++++
>   5 files changed, 1254 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-evb.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186.dtsi
>