linux-kernel - [PATCH v2] Bluetooth: btmtksdio: Add in-band wakeup support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 23 Jun 2022 05:56:43 +0800
From:   <sean.wang@...iatek.com>
To:     <marcel@...tmann.org>, <johan.hedberg@...il.com>
CC:     <sean.wang@...iatek.com>, <Soul.Huang@...iatek.com>,
        <YN.Chen@...iatek.com>, <Leon.Yen@...iatek.com>,
        <Eric-SY.Chang@...iatek.com>, <Deren.Wu@...iatek.com>,
        <km.lin@...iatek.com>, <robin.chiu@...iatek.com>,
        <Eddie.Chen@...iatek.com>, <ch.yeh@...iatek.com>,
        <posh.sun@...iatek.com>, <ted.huang@...iatek.com>,
        <Eric.Liang@...iatek.com>, <Stella.Chang@...iatek.com>,
        <Tom.Chou@...iatek.com>, <steve.lee@...iatek.com>,
        <jsiuda@...gle.com>, <frankgor@...gle.com>,
        <abhishekpandit@...gle.com>, <michaelfsun@...gle.com>,
        <mcchou@...omium.org>, <shawnku@...gle.com>,
        <linux-bluetooth@...r.kernel.org>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        "Yake Yang" <yake.yang@...iatek.com>
Subject: [PATCH v2] Bluetooth: btmtksdio: Add in-band wakeup support

From: Sean Wang <sean.wang@...iatek.com>

Commit ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth")
adds the wake on bluethooth via a dedicated GPIO.

Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup),
when supported by the SDIO host driver.

Co-developed-by: Yake Yang <yake.yang@...iatek.com>
Signed-off-by: Yake Yang <yake.yang@...iatek.com>
Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
v2: enhance the patch description and comments
---
 drivers/bluetooth/btmtksdio.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index d6700efcfe8c..9d79c9107b3a 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -118,6 +118,7 @@ MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
 #define BTMTKSDIO_FUNC_ENABLED		3
 #define BTMTKSDIO_PATCH_ENABLED		4
 #define BTMTKSDIO_HW_RESET_ACTIVE	5
+#define BTMTKSDIO_INBAND_WAKEUP		6
 
 struct mtkbtsdio_hdr {
 	__le16	len;
@@ -1294,6 +1295,9 @@ static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev)
 		.wakeup_delay = cpu_to_le16(0x20),
 	};
 
+	if (test_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state))
+		return may_wakeup;
+
 	if (may_wakeup && bdev->data->chipid == 0x7921) {
 		struct sk_buff *skb;
 
@@ -1384,6 +1388,10 @@ static int btmtksdio_probe(struct sdio_func *func,
 	 */
 	pm_runtime_put_noidle(bdev->dev);
 
+	/* Mark if MMC host supports wake on bluetooth by SDIO */
+	if (device_can_wakeup(func->card->host->parent))
+		set_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state);
+
 	err = device_init_wakeup(bdev->dev, true);
 	if (err)
 		bt_dev_err(hdev, "failed to initialize device wakeup");
-- 
2.25.1