| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1655892104-10874-3-git-send-email-u0084500@gmail.com>
Date: Wed, 22 Jun 2022 18:01:42 +0800
From: cy_huang <u0084500@...il.com>
To: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
lee.jones@...aro.org, broonie@...nel.org, dmitry.torokhov@...il.com
Cc: lgirdwood@...il.com, cy_huang@...htek.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-input@...r.kernel.org
Subject: [PATCH v2 2/4] mfd: rt5120: Add Richtek PMIC support
From: ChiYuan Huang <cy_huang@...htek.com>
Add Richtek RT5120 PMIC I2C driver.
Signed-off-by: ChiYuan Huang <cy_huang@...htek.com>
---
drivers/mfd/Kconfig | 12 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/rt5120.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 138 insertions(+)
create mode 100644 drivers/mfd/rt5120.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3b59456..866619c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1127,6 +1127,18 @@ config MFD_RT5033
sub-devices like charger, fuel gauge, flash LED, current source,
LDO and Buck.
+config MFD_RT5120
+ tristate "Richtek RT5120 Power Management IC"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ The enables support for Richtek RT5120 PMIC. It includes four high
+ efficiency buck converters and one LDO voltage regulator. The device
+ is targeted at providing the CPU voltage, memory, I/O and peripheral
+ power rails in home entertainment devices.
+
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 858cacf..27e8add 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -234,6 +234,7 @@ obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT4831) += rt4831.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
+obj-$(CONFIG_MFD_RT5120) += rt5120.o
obj-$(CONFIG_MFD_SKY81452) += sky81452.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
diff --git a/drivers/mfd/rt5120.c b/drivers/mfd/rt5120.c
new file mode 100644
index 00000000..e7c5f3c
--- /dev/null
+++ b/drivers/mfd/rt5120.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+
+#define RT5120_REG_INTENABLE 0x1D
+#define RT5120_REG_INTSTAT 0x1E
+#define RT5120_REG_FZCMODE 0x44
+
+#define RT5120_INT_HOTDIE 0
+#define RT5120_INT_PWRKEY_REL 5
+#define RT5120_INT_PWRKEY_PRESS 6
+
+static const struct regmap_range rt5120_rd_yes_ranges[] = {
+ regmap_reg_range(0x03, 0x13),
+ regmap_reg_range(0x1c, 0x20),
+ regmap_reg_range(0x44, 0x44)
+};
+
+static const struct regmap_range rt5120_wr_yes_ranges[] = {
+ regmap_reg_range(0x06, 0x13),
+ regmap_reg_range(0x1c, 0x20),
+ regmap_reg_range(0x44, 0x44)
+};
+
+static const struct regmap_access_table rt5120_rd_table = {
+ .yes_ranges = rt5120_rd_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(rt5120_rd_yes_ranges),
+};
+
+static const struct regmap_access_table rt5120_wr_table = {
+ .yes_ranges = rt5120_wr_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(rt5120_wr_yes_ranges),
+};
+
+static const struct regmap_config rt5120_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RT5120_REG_FZCMODE,
+
+ .wr_table = &rt5120_wr_table,
+ .rd_table = &rt5120_rd_table,
+};
+
+static const struct regmap_irq rt5120_irqs[] = {
+ REGMAP_IRQ_REG_LINE(RT5120_INT_HOTDIE, 8),
+ REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_REL, 8),
+ REGMAP_IRQ_REG_LINE(RT5120_INT_PWRKEY_PRESS, 8)
+};
+
+static const struct regmap_irq_chip rt5120_irq_chip = {
+ .name = "rt5120-pmic",
+ .status_base = RT5120_REG_INTSTAT,
+ .mask_base = RT5120_REG_INTENABLE,
+ .ack_base = RT5120_REG_INTSTAT,
+ .mask_invert = true,
+ .use_ack = true,
+ .num_regs = 1,
+ .irqs = rt5120_irqs,
+ .num_irqs = ARRAY_SIZE(rt5120_irqs),
+};
+
+static const struct resource rt5120_regulator_resources[] = {
+ DEFINE_RES_IRQ(RT5120_INT_HOTDIE)
+};
+
+static const struct resource rt5120_pwrkey_resources[] = {
+ DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_PRESS, "pwrkey-press"),
+ DEFINE_RES_IRQ_NAMED(RT5120_INT_PWRKEY_REL, "pwrkey-release")
+};
+
+static const struct mfd_cell rt5120_devs[] = {
+ MFD_CELL_RES("rt5120-regulator", rt5120_regulator_resources),
+ MFD_CELL_OF("rt5120-pwrkey", rt5120_pwrkey_resources, NULL, 0, 0,
+ "richtek,rt5120-pwrkey")
+};
+
+static int rt5120_probe(struct i2c_client *i2c)
+{
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *irq_data;
+ int ret;
+
+ regmap = devm_regmap_init_i2c(i2c, &rt5120_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&i2c->dev, "Failed to init regmap (%d)\n", ret);
+ return ret;
+ }
+
+ ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq,
+ IRQF_ONESHOT, 0, &rt5120_irq_chip,
+ &irq_data);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add irq chip (%d)\n", ret);
+ return ret;
+ }
+
+ return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, rt5120_devs,
+ ARRAY_SIZE(rt5120_devs), NULL, 0,
+ regmap_irq_get_domain(irq_data));
+}
+
+static const struct of_device_id rt5120_device_match_table[] = {
+ { .compatible = "richtek,rt5120", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rt5120_device_match_table);
+
+static struct i2c_driver rt5120_driver = {
+ .driver = {
+ .name = "rt5120",
+ .of_match_table = rt5120_device_match_table,
+ },
+ .probe_new = rt5120_probe,
+};
+module_i2c_driver(rt5120_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@...htek.com>");
+MODULE_DESCRIPTION("Richtek RT5120 I2C driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
Powered by blists - more mailing lists