| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fb234ad7-6a95-d5f2-9ebc-48ac2dd8fb8a@somainline.org>
Date: Wed, 22 Jun 2022 14:39:43 +0200
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>,
Andy Gross <agross@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Jassi Brar <jassisinghbrar@...il.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 6/6] arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad
X13s devicetree
On 22.06.2022 06:12, Bjorn Andersson wrote:
> From: Johan Hovold <johan+linaro@...nel.org>
>
> Add an initial Lenovo Thinkpad X13s devicetree.
>
> Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> ---
>
> Changs since v1:
> - New patch
>
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 393 ++++++++++++++++++
> 2 files changed, 394 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 2f416b84b71c..43053f1f6be9 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -91,6 +91,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> new file mode 100644
> index 000000000000..58d3d8035751
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -0,0 +1,393 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
Can be moved to SoC dtsi.
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "sc8280xp.dtsi"
> +#include "sc8280xp-pmics.dtsi"
> +
> +/ {
> + model = "Lenovo ThinkPad X13s";
> + compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
> +
> + backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pmc8280c_lpg 3 1000000>;
> + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
> + power-supply = <&vreg_edp_bl>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
> + };
> +
> + vreg_edp_bl: edp-bl-regulator {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VBL9";
> + regulator-min-microvolt = <3600000>;
> + regulator-max-microvolt = <3600000>;
> +
> + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&edp_bl_reg_en>;
> +
> + regulator-boot-on;
> + };
> +
> + vreg_misc_3p3: misc-3p3-regulator {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VCC3B";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&misc_3p3_reg_en>;
> +
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + reserved-memory {
> + };
Seems redundant.
> +};
> +
> +&apps_rsc {
> + pmc8280-1-rpmh-regulators {
> + compatible = "qcom,pm8350-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-l3-l5-supply = <&vreg_s11b>;
> +
> + vreg_s11b: smps11 {
> + regulator-name = "vreg_s11b";
> + regulator-min-microvolt = <1272000>;
> + regulator-max-microvolt = <1272000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3b: ldo3 {
> + regulator-name = "vreg_l3b";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-boot-on;
> + };
> +
> + vreg_l4b: ldo4 {
> + regulator-name = "vreg_l4b";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l6b: ldo6 {
> + regulator-name = "vreg_l6b";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-boot-on;
> + regulator-always-on; // FIXME: VDD_A_EDP_0_0P9
> + };
> + };
> +
> + pmc8280c-rpmh-regulators {
> + compatible = "qcom,pm8350c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vreg_l1c: ldo1 {
> + regulator-name = "vreg_l1c";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l12c: ldo12 {
> + regulator-name = "vreg_l12c";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l13c: ldo13 {
> + regulator-name = "vreg_l13c";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> + };
> +
> + pmc8280-2-rpmh-regulators {
> + compatible = "qcom,pm8350-rpmh-regulators";
> + qcom,pmic-id = "d";
> +
> + vdd-l1-l4-supply = <&vreg_s11b>;
> +
> + vreg_l3d: ldo3 {
> + regulator-name = "vreg_l3d";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l4d: ldo4 {
> + regulator-name = "vreg_l4d";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l7d: ldo7 {
> + regulator-name = "vreg_l7d";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l9d: ldo9 {
> + regulator-name = "vreg_l9d";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> + };
> +};
> +
> +&pmc8280c_lpg {
> + status = "okay";
> +};
> +
> +&pmk8280_pon_pwrkey {
> + status = "okay";
> +};
> +
> +&qup0 {
> + status = "okay";
> +};
> +
> +&qup0_i2c4 {
> + clock-frequency = <400000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>;
> +
> + status = "okay";
Again, the ordering of status= question from one of the previous patches.
> +
> + /* FIXME: verify, missing on some x13s */
Won't this fail gracefully-ish if it's absent?
> + touchscreen@10 {
> + compatible = "hid-over-i2c";
> + reg = <0x10>;
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&vreg_misc_3p3>;
> + };
> +};
> +
> +&qup1 {
> + status = "okay";
> +};
> +
> +&qup2 {
> + status = "okay";
> +};
> +
> +&qup2_i2c5 {
> + clock-frequency = <400000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>;
> +
> + status = "okay";
> +
> + touchpad@2c {
> + compatible = "hid-over-i2c";
> + reg = <0x2c>;
> + hid-descr-addr = <0x20>;
> + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&vreg_misc_3p3>;
> + };
> +
> + keyboard@68 {
> + compatible = "hid-over-i2c";
> + reg = <0x68>;
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
> + vdd-supply = <&vreg_misc_3p3>;
> + };
> +};
> +
> +&remoteproc_adsp {
> + firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
> +
> + status = "okay";
> +};
> +
> +&remoteproc_nsp0 {
> + firmware-name = "qcom/sc8280xp/qccdsp8280.mbn";
> +
> + status = "okay";
> +};
> +
> +&usb_0 {
> + status = "okay";
> +};
> +
> +&usb_0_dwc3 {
> + /* TODO: Define USB-C connector properly */
> + dr_mode = "host";
> +};
> +
> +&usb_0_hsphy {
> + vdda-pll-supply = <&vreg_l9d>;
> + vdda18-supply = <&vreg_l1c>;
> + vdda33-supply = <&vreg_l7d>;
> +
> + status = "okay";
> +};
> +
> +&usb_0_qmpphy {
> + vdda-phy-supply = <&vreg_l9d>;
> + vdda-pll-supply = <&vreg_l4d>;
> +
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + /* TODO: Define USB-C connector properly */
> + dr_mode = "host";
> +};
> +
> +&usb_1_hsphy {
> + vdda-pll-supply = <&vreg_l4b>;
> + vdda18-supply = <&vreg_l1c>;
> + vdda33-supply = <&vreg_l13c>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> + vdda-phy-supply = <&vreg_l4b>;
> + vdda-pll-supply = <&vreg_l3b>;
> +
> + status = "okay";
> +};
> +
> +&xo_board_clk {
> + clock-frequency = <38400000>;
> +};
> +
> +/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */
Seems redundant.
> +
> +&pmc8280_1_gpios {
> + edp_bl_en: edp-bl-en-state {
> + pins = "gpio8";
> + function = "normal";
> + };
> +
> + edp_bl_reg_en: edp-bl-reg-en-state {
> + pins = "gpio9";
> + function = "normal";
> + };
> +
> + misc_3p3_reg_en: misc-3p3-reg-en-state {
> + pins = "gpio1";
> + function = "normal";
> + };
> +};
> +
> +&pmc8280c_gpios {
> + edp_bl_pwm: edp-bl-pwm-state {
> + pins = "gpio8";
> + function = "func1";
> + };
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
> +
> + kybd_default: kybd-default-state {
> + disable {
> + pins = "gpio102";
> + function = "gpio";
> + output-low;
> + };
> +
> + int-n {
> + pins = "gpio104";
> + function = "gpio";
> + bias-disable;
> + };
> +
> + reset {
> + pins = "gpio105";
> + function = "gpio";
> + bias-disable;
> + };
> + };
> +
> + qup0_i2c4_default: qup0-i2c4-default-state {
> + pins = "gpio171", "gpio172";
> + function = "qup4";
> +
> + bias-disable;
> + drive-strength = <16>;
> + };
> +
> + qup2_i2c5_default: qup2-i2c5-default-state {
> + pins = "gpio81", "gpio82";
> + function = "qup21";
> +
> + bias-disable;
> + drive-strength = <16>;
> + };
> +
> + tpad_default: tpad-default-state {
> + int-n {
Same comment as in the reference device dt.
Konrad
> + pins = "gpio182";
> + function = "gpio";
> + bias-disable;
> + };
> + };
> +
> + ts0_default: ts0-default-state {
> + int-n {
> + pins = "gpio175";
> + function = "gpio";
> + bias-pull-up;
> + };
> +
> + reset-n {
> + pins = "gpio99";
> + function = "gpio";
> + output-high;
> + drive-strength = <16>;
> + };
> + };
> +};
>
Powered by blists - more mailing lists