[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20220623100221.740de5c3@fixe.home>
Date: Thu, 23 Jun 2022 10:02:21 +0200
From: Clément Léger <clement.leger@...tlin.com>
To: Vladimir Oltean <olteanv@...il.com>
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Jose Abreu <joabreu@...opsys.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Herve Codina <herve.codina@...tlin.com>,
Miquèl Raynal <miquel.raynal@...tlin.com>,
Milan Stevanovic <milan.stevanovic@...com>,
Jimmy Lalande <jimmy.lalande@...com>,
Pascal Eberhard <pascal.eberhard@...com>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [PATCH net-next v8 15/16] ARM: dts: r9a06g032-rzn1d400-db: add
switch description
Le Tue, 21 Jun 2022 14:56:03 +0300,
Vladimir Oltean <olteanv@...il.com> a écrit :
> On Mon, Jun 20, 2022 at 01:08:45PM +0200, Clément Léger wrote:
> > Add description for the switch, GMAC2 and MII converter. With these
> > definitions, the switch port 0 and 1 (MII port 5 and 4) are working on
> > RZ/N1D-DB board.
> >
> > Signed-off-by: Clément Léger <clement.leger@...tlin.com>
> > ---
>
> Reviewed-by: Vladimir Oltean <olteanv@...il.com>
>
> Just minor comments below:
>
> > arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 117 ++++++++++++++++++++
> > 1 file changed, 117 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> > index 3f8f3ce87e12..36b898d9f115 100644
> > --- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> > +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
> > @@ -8,6 +8,8 @@
> >
> > /dts-v1/;
> >
> > +#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
> > +#include <dt-bindings/net/pcs-rzn1-miic.h>
> > #include "r9a06g032.dtsi"
> >
> > / {
> > @@ -31,3 +33,118 @@ &wdt0 {
> > timeout-sec = <60>;
> > status = "okay";
> > };
> > +
> > +&gmac2 {
> > + status = "okay";
> > + phy-mode = "gmii";
> > + fixed-link {
> > + speed = <1000>;
> > + full-duplex;
> > + };
> > +};
> > +
> > +&switch {
> > + status = "okay";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pins_mdio1>, <&pins_eth3>, <&pins_eth4>;
> > +
> > + dsa,member = <0 0>;
>
> This doesn't really have any value for single-switch DSA trees, since
> that is the implicit tree id/switch id, but it doesn't hurt, either.
Ok, let's remove it then if it's useless.
>
> > +
> > + mdio {
> > + clock-frequency = <2500000>;
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + switch0phy4: ethernet-phy@4{
>
> Space between ethernet-phy@4 and {.
>
> > + reg = <4>;
> > + micrel,led-mode = <1>;
> > + };
> > +
> > + switch0phy5: ethernet-phy@5{
>
> Same thing here.
Acked
--
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com
Powered by blists - more mailing lists