| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 23 Jun 2022 17:50:04 +0200
From: Robert Marko <robimarko@...il.com>
To: svarbanov@...sol.com, agross@...nel.org,
bjorn.andersson@...aro.org, lpieralisi@...nel.org, robh@...nel.org,
kw@...ux.com, bhelgaas@...gle.com, p.zabel@...gutronix.de,
jingoohan1@...il.com, linux-pci@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
johan+linaro@...nel.org, dmitry.baryshkov@...aro.org
Cc: Robert Marko <robimarko@...il.com>
Subject: [PATCH v3 2/2] PCI: qcom: move register accesses to .post_init
Move register accesses from .init to .post_init callbacks to maintain
consinstency for all IP since IPQ8074 specifically requires PHY-s to be
powered on before register access and its accesses have been moved to
.post_init.
Signed-off-by: Robert Marko <robimarko@...il.com>
---
drivers/pci/controller/dwc/pcie-qcom.c | 171 ++++++++++++++-----------
1 file changed, 97 insertions(+), 74 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 24708d5d817d..1aa11f12c069 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -348,8 +348,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- struct device_node *node = dev->of_node;
- u32 val;
int ret;
/* reset the PCIe interface as uboot can leave it undefined state */
@@ -360,8 +358,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
reset_control_assert(res->ext_reset);
reset_control_assert(res->phy_reset);
- writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL);
-
ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
if (ret < 0) {
dev_err(dev, "cannot enable regulators\n");
@@ -408,6 +404,35 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
if (ret)
goto err_clks;
+ return 0;
+
+err_clks:
+ reset_control_assert(res->axi_reset);
+err_deassert_axi:
+ reset_control_assert(res->por_reset);
+err_deassert_por:
+ reset_control_assert(res->pci_reset);
+err_deassert_pci:
+ reset_control_assert(res->phy_reset);
+err_deassert_phy:
+ reset_control_assert(res->ext_reset);
+err_deassert_ext:
+ reset_control_assert(res->ahb_reset);
+err_deassert_ahb:
+ regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+
+ return ret;
+}
+
+static int qcom_pcie_post_init_2_1_0(struct qcom_pcie *pcie)
+{
+ struct dw_pcie *pci = pcie->pci;
+ struct device *dev = pci->dev;
+ struct device_node *node = dev->of_node;
+ u32 val;
+
+ writel(1, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
/* enable PCIe clocks and resets */
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
val &= ~BIT(0);
@@ -451,23 +476,6 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
return 0;
-
-err_clks:
- reset_control_assert(res->axi_reset);
-err_deassert_axi:
- reset_control_assert(res->por_reset);
-err_deassert_por:
- reset_control_assert(res->pci_reset);
-err_deassert_pci:
- reset_control_assert(res->phy_reset);
-err_deassert_phy:
- reset_control_assert(res->ext_reset);
-err_deassert_ext:
- reset_control_assert(res->ahb_reset);
-err_deassert_ahb:
- regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-
- return ret;
}
static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie)
@@ -555,16 +563,6 @@ static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie)
goto err_slave;
}
- /* change DBI base address */
- writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
-
- if (IS_ENABLED(CONFIG_PCI_MSI)) {
- u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
-
- val |= BIT(31);
- writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
- }
-
return 0;
err_slave:
clk_disable_unprepare(res->slave_bus);
@@ -580,6 +578,22 @@ static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie)
return ret;
}
+static int qcom_pcie_post_init_1_0_0(struct qcom_pcie *pcie)
+{
+
+ /* change DBI base address */
+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+
+ val |= BIT(31);
+ writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+ }
+
+ return 0;
+}
+
static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie)
{
u32 val;
@@ -648,7 +662,6 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- u32 val;
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies);
@@ -681,27 +694,6 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
goto err_slave_clk;
}
- /* enable PCIe clocks and resets */
- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
- val &= ~BIT(0);
- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-
- /* change DBI base address */
- writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
-
- /* MAC PHY_POWERDOWN MUX DISABLE */
- val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL);
- val &= ~BIT(29);
- writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL);
-
- val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
- val |= BIT(4);
- writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
-
- val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
- val |= BIT(31);
- writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
-
return 0;
err_slave_clk:
@@ -722,8 +714,30 @@ static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
+ u32 val;
int ret;
+ /* enable PCIe clocks and resets */
+ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+ val &= ~BIT(0);
+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
+ /* change DBI base address */
+ writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+ /* MAC PHY_POWERDOWN MUX DISABLE */
+ val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL);
+ val &= ~BIT(29);
+ writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL);
+
+ val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
+ val |= BIT(4);
+ writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
+
+ val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
+ val |= BIT(31);
+ writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
+
ret = clk_prepare_enable(res->pipe_clk);
if (ret) {
dev_err(dev, "cannot prepare/enable pipe clock\n");
@@ -837,7 +851,6 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- u32 val;
int ret;
ret = reset_control_assert(res->axi_m_reset);
@@ -962,6 +975,33 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
if (ret)
goto err_clks;
+ return 0;
+
+err_clks:
+ reset_control_assert(res->ahb_reset);
+err_rst_ahb:
+ reset_control_assert(res->pwr_reset);
+err_rst_pwr:
+ reset_control_assert(res->axi_s_reset);
+err_rst_axi_s:
+ reset_control_assert(res->axi_m_sticky_reset);
+err_rst_axi_m_sticky:
+ reset_control_assert(res->axi_m_reset);
+err_rst_axi_m:
+ reset_control_assert(res->pipe_sticky_reset);
+err_rst_pipe_sticky:
+ reset_control_assert(res->pipe_reset);
+err_rst_pipe:
+ reset_control_assert(res->phy_reset);
+err_rst_phy:
+ reset_control_assert(res->phy_ahb_reset);
+ return ret;
+}
+
+static int qcom_pcie_post_init_2_4_0(struct qcom_pcie *pcie)
+{
+ u32 val;
+
/* enable PCIe clocks and resets */
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
val &= ~BIT(0);
@@ -984,26 +1024,6 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
return 0;
-
-err_clks:
- reset_control_assert(res->ahb_reset);
-err_rst_ahb:
- reset_control_assert(res->pwr_reset);
-err_rst_pwr:
- reset_control_assert(res->axi_s_reset);
-err_rst_axi_s:
- reset_control_assert(res->axi_m_sticky_reset);
-err_rst_axi_m_sticky:
- reset_control_assert(res->axi_m_reset);
-err_rst_axi_m:
- reset_control_assert(res->pipe_sticky_reset);
-err_rst_pipe_sticky:
- reset_control_assert(res->pipe_reset);
-err_rst_pipe:
- reset_control_assert(res->phy_reset);
-err_rst_phy:
- reset_control_assert(res->phy_ahb_reset);
- return ret;
}
static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
@@ -1569,6 +1589,7 @@ static const struct dw_pcie_host_ops qcom_pcie_dw_ops = {
static const struct qcom_pcie_ops ops_2_1_0 = {
.get_resources = qcom_pcie_get_resources_2_1_0,
.init = qcom_pcie_init_2_1_0,
+ .post_init = qcom_pcie_post_init_2_1_0,
.deinit = qcom_pcie_deinit_2_1_0,
.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
};
@@ -1577,6 +1598,7 @@ static const struct qcom_pcie_ops ops_2_1_0 = {
static const struct qcom_pcie_ops ops_1_0_0 = {
.get_resources = qcom_pcie_get_resources_1_0_0,
.init = qcom_pcie_init_1_0_0,
+ .post_init = qcom_pcie_post_init_1_0_0,
.deinit = qcom_pcie_deinit_1_0_0,
.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
};
@@ -1595,6 +1617,7 @@ static const struct qcom_pcie_ops ops_2_3_2 = {
static const struct qcom_pcie_ops ops_2_4_0 = {
.get_resources = qcom_pcie_get_resources_2_4_0,
.init = qcom_pcie_init_2_4_0,
+ .post_init = qcom_pcie_post_init_2_4_0,
.deinit = qcom_pcie_deinit_2_4_0,
.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
};
--
2.36.1
Powered by blists - more mailing lists