lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220624204210.11112-4-ilpo.jarvinen@linux.intel.com>
Date:   Fri, 24 Jun 2022 23:42:07 +0300
From:   Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To:     linux-serial@...r.kernel.org, Greg KH <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        linux-kernel@...r.kernel.org
Cc:     Lukas Wunner <lukas@...ner.de>,
        Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>,
        Lino Sanfilippo <LinoSanfilippo@....de>,
        Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Subject: [PATCH v9 3/6] serial: 8250_lpss: Use 32-bit reads

Use 32-bit reads in order to not lose higher bits of DW UART regs. This
change does not fix any known issue as the high bits are not used for
anything related to 8250 driver (dw8250_readl_ext and dw8250_writel_ext
used within the dwlib are already doing
readl/writel/ioread32be/iowrite32be anyway).

This change is necessary to enables 9th bit address mode. DW UART
reports address frames with BIT(8) of LSR.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
---
 drivers/tty/serial/8250/8250_lpss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 0f5af061e0b4..4ba43bef9933 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -330,7 +330,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	uart.port.irq = pci_irq_vector(pdev, 0);
 	uart.port.private_data = &lpss->data;
 	uart.port.type = PORT_16550A;
-	uart.port.iotype = UPIO_MEM;
+	uart.port.iotype = UPIO_MEM32;
 	uart.port.regshift = 2;
 	uart.port.uartclk = lpss->board->base_baud * 16;
 	uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
-- 
2.30.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ