| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2219b4523d9c52778610395de191c634dfe1801e.camel@mediatek.com>
Date: Fri, 24 Jun 2022 21:40:58 +0800
From: Guodong Liu <guodong.liu@...iatek.com>
To: "Nícolas F. R. A. Prado" <nfraprado@...labora.com>
CC: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Sean Wang <sean.wang@...nel.org>,
Sean Wang <sean.wang@...iatek.com>,
Zhiyong Tao <zhiyong.tao@...iatek.com>,
<linux-gpio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH v1 3/4] pinctrl: mediatek: add rsel setting on mt8192
-----Original Message-----
From: Nícolas F. R. A. Prado <nfraprado@...labora.com>
To: Guodong Liu <guodong.liu@...iatek.com>
Cc: Linus Walleij <linus.walleij@...aro.org>, Rob Herring <
robh+dt@...nel.org>, Matthias Brugger <matthias.bgg@...il.com>, Sean
Wang <sean.wang@...nel.org>, Sean Wang <sean.wang@...iatek.com>,
Zhiyong Tao <zhiyong.tao@...iatek.com>, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Project_Global_Chrome_Upstream_Group@...iatek.com
Subject: Re: [PATCH v1 3/4] pinctrl: mediatek: add rsel setting on
mt8192
Date: Thu, 9 Jun 2022 14:47:16 -0400
Hi Guodong,
thank you for the patch. Please see some suggestions below.
On Wed, Jun 08, 2022 at 01:39:08PM +0800, Guodong Liu wrote:
> I2C pins's resistance value can be controlled by rsel register.
> This patch provides rsel (resistance selection) setting on mt8192
Please mention that you're also adding the pull_type array in this
commit,
something like: "Also add the missing pull type array for mt8192 to
document the
pull type of each pin and prevent invalid pull type settings".
will fix it in next version,thanks!
>
> Signed-off-by: Guodong Liu <guodong.liu@...iatek.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-mt8192.c | 204 ++++++++++++++----
> ----
> 1 file changed, 134 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> index d11ff5519e1e..1486c141ee8c 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
> @@ -1285,73 +1285,140 @@ static const struct mtk_pin_field_calc
> mt8192_pin_drv_adv_range[] = {
> PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 6, 3),
> };
>
> -static const struct mtk_pin_field_calc mt8192_pin_e1e0en_range[] = {
> - PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 0, 1),
> - PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 18, 1),
> - PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 15, 1),
> - PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 3, 1),
> - PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 12, 1),
> - PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 0, 1),
> - PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 9, 1),
> - PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 27, 1),
> - PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 6, 1),
> - PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 24, 1),
> - PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 3, 1),
> - PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 21, 1),
> - PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 0, 1),
> - PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 3, 1),
> - PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 3, 1),
> - PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 9, 1),
> - PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 0, 1),
> - PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 3, 1),
> - PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 0, 1),
> - PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 6, 1),
You're dropping E1, E0, and EN arrays here, but these were used by the
original
advanced drive configuration, so they should've been dropped in the
previous
patch, not in this one.
will fix it in next version,thanks!
> +static const struct mtk_pin_field_calc mt8192_pin_rsel_range[] = {
> + PIN_FIELD_BASE(118, 118, 4, 0x00e0, 0x10, 0, 2),
> + PIN_FIELD_BASE(119, 119, 4, 0x00e0, 0x10, 12, 2),
> + PIN_FIELD_BASE(120, 120, 4, 0x00e0, 0x10, 10, 2),
> + PIN_FIELD_BASE(121, 121, 4, 0x00e0, 0x10, 22, 2),
> + PIN_FIELD_BASE(122, 122, 4, 0x00e0, 0x10, 8, 2),
> + PIN_FIELD_BASE(123, 123, 4, 0x00e0, 0x10, 20, 2),
> + PIN_FIELD_BASE(124, 124, 4, 0x00e0, 0x10, 6, 2),
> + PIN_FIELD_BASE(125, 125, 4, 0x00e0, 0x10, 18, 2),
> + PIN_FIELD_BASE(139, 139, 4, 0x00e0, 0x10, 4, 2),
> + PIN_FIELD_BASE(140, 140, 4, 0x00e0, 0x10, 16, 2),
> + PIN_FIELD_BASE(141, 141, 4, 0x00e0, 0x10, 2, 2),
> + PIN_FIELD_BASE(142, 142, 4, 0x00e0, 0x10, 14, 2),
> + PIN_FIELD_BASE(160, 160, 7, 0x00f0, 0x10, 0, 2),
> + PIN_FIELD_BASE(161, 161, 7, 0x00f0, 0x10, 2, 2),
> + PIN_FIELD_BASE(200, 200, 8, 0x0070, 0x10, 2, 2),
> + PIN_FIELD_BASE(201, 201, 8, 0x0070, 0x10, 6, 2),
> + PIN_FIELD_BASE(202, 202, 5, 0x0070, 0x10, 0, 2),
> + PIN_FIELD_BASE(203, 203, 5, 0x0070, 0x10, 2, 2),
> + PIN_FIELD_BASE(204, 204, 8, 0x0070, 0x10, 0, 2),
> + PIN_FIELD_BASE(205, 205, 8, 0x0070, 0x10, 4, 2),
> };
>
> -static const struct mtk_pin_field_calc mt8192_pin_e0_range[] = {
> - PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 1, 1),
> - PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 19, 1),
> - PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 16, 1),
> - PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 4, 1),
> - PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 13, 1),
> - PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 1, 1),
> - PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 10, 1),
> - PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 28, 1),
> - PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 7, 1),
> - PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 25, 1),
> - PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 4, 1),
> - PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 22, 1),
> - PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 1, 1),
> - PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 4, 1),
> - PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 4, 1),
> - PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 10, 1),
> - PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 1, 1),
> - PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 4, 1),
> - PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 1, 1),
> - PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 7, 1),
> -};
> -
> -static const struct mtk_pin_field_calc mt8192_pin_e1_range[] = {
> - PIN_FIELD_BASE(118, 118, 4, 0x0040, 0x10, 2, 1),
> - PIN_FIELD_BASE(119, 119, 4, 0x0040, 0x10, 20, 1),
> - PIN_FIELD_BASE(120, 120, 4, 0x0040, 0x10, 17, 1),
> - PIN_FIELD_BASE(121, 121, 4, 0x0050, 0x10, 5, 1),
> - PIN_FIELD_BASE(122, 122, 4, 0x0040, 0x10, 14, 1),
> - PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 2, 1),
> - PIN_FIELD_BASE(124, 124, 4, 0x0040, 0x10, 11, 1),
> - PIN_FIELD_BASE(125, 125, 4, 0x0040, 0x10, 29, 1),
> - PIN_FIELD_BASE(139, 139, 4, 0x0040, 0x10, 8, 1),
> - PIN_FIELD_BASE(140, 140, 4, 0x0040, 0x10, 26, 1),
> - PIN_FIELD_BASE(141, 141, 4, 0x0040, 0x10, 5, 1),
> - PIN_FIELD_BASE(142, 142, 4, 0x0040, 0x10, 23, 1),
> - PIN_FIELD_BASE(160, 160, 7, 0x0030, 0x10, 2, 1),
> - PIN_FIELD_BASE(161, 161, 7, 0x0030, 0x10, 5, 1),
> - PIN_FIELD_BASE(200, 200, 8, 0x0010, 0x10, 5, 1),
> - PIN_FIELD_BASE(201, 201, 8, 0x0010, 0x10, 11, 1),
> - PIN_FIELD_BASE(202, 202, 5, 0x0020, 0x10, 2, 1),
> - PIN_FIELD_BASE(203, 203, 5, 0x0020, 0x10, 5, 1),
> - PIN_FIELD_BASE(204, 204, 8, 0x0010, 0x10, 2, 1),
> - PIN_FIELD_BASE(205, 205, 8, 0x0010, 0x10, 8, 1),
> +static const unsigned int mt8192_pull_type[] = {
> + MTK_PULL_PU_PD_TYPE,/*0*/ MTK_PULL_PU_PD_TYPE,/*1*/
> + MTK_PULL_PU_PD_TYPE,/*2*/ MTK_PULL_PU_PD_TYPE,/*3*/
> + MTK_PULL_PU_PD_TYPE,/*4*/ MTK_PULL_PU_PD_TYPE,/*5*/
> + MTK_PULL_PU_PD_TYPE,/*6*/ MTK_PULL_PU_PD_TYPE,/*7*/
> + MTK_PULL_PU_PD_TYPE,/*8*/ MTK_PULL_PU_PD_TYPE,/*9*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*
> /
> + MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*
> /
> + MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*
> /
> + MTK_PULL_PU_PD_TYPE,/*16*/ MTK_PULL_PU_PD_TYPE,/
> *17*/
> + MTK_PULL_PU_PD_TYPE,/*18*/ MTK_PULL_PU_PD_TYPE,/
> *19*/
> + MTK_PULL_PU_PD_TYPE,/*20*/ MTK_PULL_PU_PD_TYPE,/
> *21*/
> + MTK_PULL_PU_PD_TYPE,/*22*/ MTK_PULL_PU_PD_TYPE,/
> *23*/
> + MTK_PULL_PU_PD_TYPE,/*24*/ MTK_PULL_PU_PD_TYPE,/
> *25*/
> + MTK_PULL_PU_PD_TYPE,/*26*/ MTK_PULL_PU_PD_TYPE,/
> *27*/
> + MTK_PULL_PU_PD_TYPE,/*28*/ MTK_PULL_PU_PD_TYPE,/
> *29*/
> + MTK_PULL_PU_PD_TYPE,/*30*/ MTK_PULL_PU_PD_TYPE,/
> *31*/
> + MTK_PULL_PU_PD_TYPE,/*32*/ MTK_PULL_PU_PD_TYPE,/
> *33*/
> + MTK_PULL_PU_PD_TYPE,/*34*/ MTK_PULL_PU_PD_TYPE,/
> *35*/
> + MTK_PULL_PU_PD_TYPE,/*36*/ MTK_PULL_PU_PD_TYPE,/
> *37*/
> + MTK_PULL_PU_PD_TYPE,/*38*/ MTK_PULL_PU_PD_TYPE,/
> *39*/
> + MTK_PULL_PU_PD_TYPE,/*40*/ MTK_PULL_PU_PD_TYPE,/
> *41*/
> + MTK_PULL_PU_PD_TYPE,/*42*/ MTK_PULL_PU_PD_TYPE,/
> *43*/
> + MTK_PULL_PU_PD_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TY
> PE,/*45*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*
> /
> + MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*
> /
> + MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*
> /
> + MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*
> /
> + MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*
> /
> + MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PU_PD_TYPE,/*57*/
> + MTK_PULL_PU_PD_TYPE,/*58*/ MTK_PULL_PU_PD_TYPE,/
> *59*/
> + MTK_PULL_PU_PD_TYPE,/*60*/ MTK_PULL_PU_PD_TYPE,/
> *61*/
> + MTK_PULL_PU_PD_TYPE,/*62*/ MTK_PULL_PU_PD_TYPE,/
> *63*/
> + MTK_PULL_PU_PD_TYPE,/*64*/ MTK_PULL_PU_PD_TYPE,/
> *65*/
> + MTK_PULL_PU_PD_TYPE,/*66*/ MTK_PULL_PU_PD_TYPE,/
> *67*/
> + MTK_PULL_PU_PD_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/
> *69*/
> + MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/
> *71*/
> + MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/
> *73*/
> + MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/
> *75*/
> + MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/
> *77*/
> + MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/
> *79*/
> + MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/
> *81*/
> + MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/
> *83*/
> + MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/
> *85*/
> + MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/
> *87*/
> + MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/
> *89*/
> + MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/
> *91*/
> + MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/
> *93*/
> + MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/
> *95*/
> + MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/
> *97*/
> + MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/
> *99*/
> + MTK_PULL_PU_PD_TYPE,/*100*/ MTK_PULL_PU_PD_TYPE,/
> *101*/
> + MTK_PULL_PU_PD_TYPE,/*102*/ MTK_PULL_PU_PD_TYPE,/
> *103*/
> + MTK_PULL_PU_PD_TYPE,/*104*/ MTK_PULL_PU_PD_TYPE,/
> *105*/
> + MTK_PULL_PU_PD_TYPE,/*106*/ MTK_PULL_PU_PD_TYPE,/
> *107*/
> + MTK_PULL_PU_PD_TYPE,/*108*/ MTK_PULL_PU_PD_TYPE,/
> *109*/
> + MTK_PULL_PU_PD_TYPE,/*110*/ MTK_PULL_PU_PD_TYPE,/
> *111*/
> + MTK_PULL_PU_PD_TYPE,/*112*/ MTK_PULL_PU_PD_TYPE,/
> *113*/
> + MTK_PULL_PU_PD_TYPE,/*114*/ MTK_PULL_PU_PD_TYPE,/
> *115*/
> + MTK_PULL_PU_PD_TYPE,/*116*/ MTK_PULL_PU_PD_TYPE,/
> *117*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*118*/ MTK_PULL_PU_PD_RSEL_TYPE,/*11
> 9*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*120*/ MTK_PULL_PU_PD_RSEL_TYPE,/*12
> 1*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*122*/ MTK_PULL_PU_PD_RSEL_TYPE,/*12
> 3*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*124*/ MTK_PULL_PU_PD_RSEL_TYPE,/*12
> 5*/
> + MTK_PULL_PU_PD_TYPE,/*126*/ MTK_PULL_PU_PD_TYPE,/
> *127*/
> + MTK_PULL_PU_PD_TYPE,/*128*/ MTK_PULL_PU_PD_TYPE,/
> *129*/
> + MTK_PULL_PU_PD_TYPE,/*130*/ MTK_PULL_PU_PD_TYPE,/
> *131*/
> + MTK_PULL_PU_PD_TYPE,/*132*/ MTK_PULL_PU_PD_TYPE,/
> *133*/
> + MTK_PULL_PU_PD_TYPE,/*134*/ MTK_PULL_PU_PD_TYPE,/
> *135*/
> + MTK_PULL_PU_PD_TYPE,/*136*/ MTK_PULL_PU_PD_TYPE,/
> *137*/
> + MTK_PULL_PU_PD_TYPE,/*138*/ MTK_PULL_PU_PD_RSEL_T
> YPE,/*139*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*140*/ MTK_PULL_PU_PD_RSEL_TYPE,/*14
> 1*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*142*/ MTK_PULL_PU_PD_TYPE,/*143*/
> + MTK_PULL_PU_PD_TYPE,/*144*/ MTK_PULL_PU_PD_TYPE,/
> *145*/
> + MTK_PULL_PU_PD_TYPE,/*146*/ MTK_PULL_PU_PD_TYPE,/
> *147*/
> + MTK_PULL_PU_PD_TYPE,/*148*/ MTK_PULL_PU_PD_TYPE,/
> *149*/
> + MTK_PULL_PU_PD_TYPE,/*150*/ MTK_PULL_PU_PD_TYPE,/
> *151*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*152*/ MTK_PULL_PUPD_R1R0_TYPE,/*153
> */
> + MTK_PULL_PUPD_R1R0_TYPE,/*154*/ MTK_PULL_PUPD_R1R0_TYPE,/*155
> */
> + MTK_PULL_PU_PD_TYPE,/*156*/ MTK_PULL_PU_PD_TYPE,/
> *157*/
> + MTK_PULL_PU_PD_TYPE,/*158*/ MTK_PULL_PU_PD_TYPE,/
> *159*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*160*/ MTK_PULL_PU_PD_RSEL_TYPE,/*16
> 1*/
> + MTK_PULL_PU_PD_TYPE,/*162*/ MTK_PULL_PU_PD_TYPE,/
> *163*/
> + MTK_PULL_PU_PD_TYPE,/*164*/ MTK_PULL_PU_PD_TYPE,/
> *165*/
> + MTK_PULL_PU_PD_TYPE,/*166*/ MTK_PULL_PU_PD_TYPE,/
> *167*/
> + MTK_PULL_PU_PD_TYPE,/*168*/ MTK_PULL_PU_PD_TYPE,/
> *169*/
> + MTK_PULL_PU_PD_TYPE,/*170*/ MTK_PULL_PU_PD_TYPE,/
> *171*/
> + MTK_PULL_PU_PD_TYPE,/*172*/ MTK_PULL_PU_PD_TYPE,/
> *173*/
> + MTK_PULL_PU_PD_TYPE,/*174*/ MTK_PULL_PU_PD_TYPE,/
> *175*/
> + MTK_PULL_PU_PD_TYPE,/*176*/ MTK_PULL_PU_PD_TYPE,/
> *177*/
> + MTK_PULL_PU_PD_TYPE,/*178*/ MTK_PULL_PU_PD_TYPE,/
> *179*/
> + MTK_PULL_PU_PD_TYPE,/*180*/ MTK_PULL_PU_PD_TYPE,/
> *181*/
> + MTK_PULL_PU_PD_TYPE,/*182*/ MTK_PULL_PUPD_R1R0_TY
> PE,/*183*/
> + MTK_PULL_PUPD_R1R0_TYPE,/*184*/ MTK_PULL_PUPD_R1R0_TYPE,/*185
> */
> + MTK_PULL_PUPD_R1R0_TYPE,/*186*/ MTK_PULL_PUPD_R1R0_TYPE,/*187
> */
> + MTK_PULL_PUPD_R1R0_TYPE,/*188*/ MTK_PULL_PUPD_R1R0_TYPE,/*189
> */
> + MTK_PULL_PUPD_R1R0_TYPE,/*190*/ MTK_PULL_PUPD_R1R0_TYPE,/*191
> */
> + MTK_PULL_PUPD_R1R0_TYPE,/*192*/ MTK_PULL_PUPD_R1R0_TYPE,/*193
> */
> + MTK_PULL_PUPD_R1R0_TYPE,/*194*/ MTK_PULL_PU_PD_TYPE,/*195*/
> + MTK_PULL_PU_PD_TYPE,/*196*/ MTK_PULL_PU_PD_TYPE,/
> *197*/
> + MTK_PULL_PU_PD_TYPE,/*198*/ MTK_PULL_PU_PD_TYPE,/
> *199*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*200*/ MTK_PULL_PU_PD_RSEL_TYPE,/*20
> 1*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*202*/ MTK_PULL_PU_PD_RSEL_TYPE,/*20
> 3*/
> + MTK_PULL_PU_PD_RSEL_TYPE,/*204*/ MTK_PULL_PU_PD_RSEL_TYPE,/*20
> 5*/
> + MTK_PULL_PU_PD_TYPE,/*206*/ MTK_PULL_PU_PD_TYPE,/
> *207*/
> + MTK_PULL_PU_PD_TYPE,/*208*/ MTK_PULL_PU_PD_TYPE,/
> *209*/
> + MTK_PULL_PU_PD_TYPE,/*210*/ MTK_PULL_PU_PD_TYPE,/
> *211*/
> + MTK_PULL_PU_PD_TYPE,/*212*/ MTK_PULL_PU_PD_TYPE,/
> *213*/
> + MTK_PULL_PU_PD_TYPE,/*214*/ MTK_PULL_PU_PD_TYPE,/
> *215*/
> + MTK_PULL_PU_PD_TYPE,/*216*/ MTK_PULL_PU_PD_TYPE,/
> *217*/
> + MTK_PULL_PU_PD_TYPE,/*218*/ MTK_PULL_PU_PD_TYPE,/
> *219*/
> };
>
>
> @@ -1381,10 +1448,8 @@ static const struct mtk_pin_reg_calc
> mt8192_reg_cals[PINCTRL_PIN_REG_MAX] = {
> [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8192_pin_pupd_range),
> [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8192_pin_r0_range),
> [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8192_pin_r1_range),
> - [PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8192_pin_e1e0en_range),
> - [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8192_pin_e0_range),
> [PINCTRL_PIN_REG_DRV_ADV] =
> MTK_RANGE(mt8192_pin_drv_adv_range),
> - [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8192_pin_e1_range),
> + [PINCTRL_PIN_REG_RSEL] = MTK_RANGE(mt8192_pin_rsel_range),
> };
>
> static const struct mtk_pin_soc mt8192_data = {
> @@ -1394,6 +1459,7 @@ static const struct mtk_pin_soc mt8192_data = {
> .ngrps = ARRAY_SIZE(mtk_pins_mt8192),
> .base_names = mt8192_pinctrl_register_base_names,
> .nbase_names = ARRAY_SIZE(mt8192_pinctrl_register_base_names),
> + .pull_type = mt8192_pull_type,
> .eint_hw = &mt8192_eint_hw,
> .nfuncs = 8,
> .gpio_m = 0,
> @@ -1401,8 +1467,6 @@ static const struct mtk_pin_soc mt8192_data = {
> .bias_get_combo = mtk_pinconf_bias_get_combo,
> .drive_set = mtk_pinconf_drive_set_rev1,
> .drive_get = mtk_pinconf_drive_get_rev1,
> - .adv_pull_get = mtk_pinconf_adv_pull_get,
> - .adv_pull_set = mtk_pinconf_adv_pull_set,
I understand you're dropping this because the bias_combo getter/setters
already
handle all cases, but still this isn't really related to adding rsel,
so I think
it'd make more sense in a separate commit. At the very least it should
be
mentioned in the commit message.
will fix it in next version,thanks!
Thanks,
Nícolas
> .adv_drive_get = mtk_pinconf_adv_drive_get_raw,
> .adv_drive_set = mtk_pinconf_adv_drive_set_raw,
> };
> --
> 2.25.5
>
Powered by blists - more mailing lists