| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f14c4deb-6430-5f9e-1607-81e661b6d5e2@linaro.org>
Date: Sat, 25 Jun 2022 22:59:33 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: alexandru.tachici@...log.com, netdev@...r.kernel.org
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
devicetree@...r.kernel.org, krzysztof.kozlowski+dt@...aro.org,
gerhard@...leder-embedded.com, geert+renesas@...der.be,
joel@....id.au, stefan.wahren@...e.com, wellslutw@...il.com,
geert@...ux-m68k.org, robh+dt@...nel.org,
d.michailidis@...gible.com, stephen@...workplumber.org,
l.stelmach@...sung.com, linux-kernel@...r.kernel.org
Subject: Re: [net-next 2/2] dt-bindings: net: adin1110: Add docs
On 24/06/2022 22:06, alexandru.tachici@...log.com wrote:
> From: Alexandru Tachici <alexandru.tachici@...log.com>
>
> Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH.
>
> Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
> ---
> .../devicetree/bindings/net/adi,adin1110.yaml | 127 ++++++++++++++++++
> 1 file changed, 127 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/adi,adin1110.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
> new file mode 100644
> index 000000000000..0ac18dd62e5a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
> @@ -0,0 +1,127 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/net/adi,adin1110.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
No quotes in both of above.
> +
> +title: ADI ADIN1110 MAC-PHY
> +
> +allOf:
allOf goes after description.
> + - $ref: ethernet-controller.yaml#
> + - $ref: spi-controller.yaml#
>From the description it looks it is SPI device, not a controller.
> +
> +maintainers:
> + - Alexandru Tachici <alexandru.tachici@...log.com>
> +
> +description: |
> + The ADIN1110 is a low power single port 10BASE-T1L MAC-
> + PHY designed for industrial Ethernet applications. It integrates
> + an Ethernet PHY core with a MAC and all the associated analog
> + circuitry, input and output clock buffering.
> +
> + The ADIN2111 is a low power, low complexity, two-Ethernet ports
> + switch with integrated 10BASE-T1L PHYs and one serial peripheral
> + interface (SPI) port. The device is designed for industrial Ethernet
> + applications using low power constrained nodes and is compliant
> + with the IEEE 802.3cg-2019 Ethernet standard for long reach
> + 10 Mbps single pair Ethernet (SPE).
> +
> + The device has a 4-wire SPI interface for communication
> + between the MAC and host processor.
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adin1110
> + - adi,adin2111
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + adi,spi-crc:
> + description: |
> + Enable CRC8 checks on SPI read/writes.
> + type: boolean
> +
> + interrupts:
> + maxItems: 1
> +
> +patternProperties:
> + "^phy@[0-1]$":
[01] is shorter
"phy" child node is deprecated, so phy@0 and phy@1, I think, as well.
Look how other ethernet controllers are doing it.
> + description: |
> + ADIN1100 PHY that is present on the same chip as the MAC.
> + type: object
> +
> + properties:
> + reg:
maxItems:1
> + items:
> + maximum: 1
> +
> + allOf:
> + - if:
> + properties:
> + compatible:
I am not sure this works correctly... You reference here parent
properties but then change them to some other compatible?
Did you actually test that this works as it should?
> + contains:
> + const: adi,adin1110
> + then:
> + properties:
> + compatible:
> + const: ethernet-phy-id0283.bc91
> + else:
> + properties:
> + compatible:
> + const: ethernet-phy-id0283.bca1
> +
> + required:
> + - compatible
> + - reg
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - phy@0
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + spi0 {
1. spi, not spi0
2. Wrong indentation. Use 4 spaces for DTS example.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
This is not needed.
> +
> + ethernet@0 {
> + compatible = "adi,adin2111";
> + reg = <0>;
> + spi-max-frequency = <24500000>;
> +
> + adi,spi-crc;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + interrupt-parent = <&gpio>;
> + interrupts = <25 2>;
"2" looks like interrupt flag, so use it.
> +
> + mac-address = [ ca 2f b7 10 23 63 ];
This should be rather some 00 11 22 type of MAC, or you expect to encode
same MAC in several devices?
> +
> + phy@0 {
> + #phy-cells = <0>;
> + compatible = "ethernet-phy-id0283.bca1";
> + reg = <0>;
> + };
> +
> + phy@1 {
> + #phy-cells = <0>;
> + compatible = "ethernet-phy-id0283.bca1";
> + reg = <1>;
> + };
> + };
> + };
Best regards,
Krzysztof
Powered by blists - more mailing lists