| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220626163300.6271-1-krzysztof.kozlowski@linaro.org>
Date: Sun, 26 Jun 2022 18:33:00 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Inki Dae <inki.dae@...sung.com>,
Seung-Woo Kim <sw0312.kim@...sung.com>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v2] dt-bindings: media: samsung,exynos5250-gsc: convert to dtschema
Convert the Samsung Exynos SoC G-Scaler bindings to DT schema.
Changes done during conversion:
1. A typical (already used) properties like clocks, iommus and
power-domains.
2. Require clocks, because they are essential for the block to operate.
3. Describe the differences in clocks between the Exynos5250/5420 and
the Exynos5433 G-Scalers. This includes the fifth Exynos5433 clock
"gsd" (GSCL Smart Deck) which was added to the DTS, but not to the
bindings and Linux driver. Similarly to Exynos5433 DECON change [1],
the clock should be used.
[1] https://lore.kernel.org/all/6270db2d-667d-8d6f-9289-be92da486c25@samsung.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes since v1:
1. Remove Joonyoung Shim from maintainers (emails bounce).
---
.../devicetree/bindings/media/exynos5-gsc.txt | 38 ------
.../media/samsung,exynos5250-gsc.yaml | 109 ++++++++++++++++++
2 files changed, 109 insertions(+), 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/exynos5-gsc.txt
create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
deleted file mode 100644
index 1872688fa408..000000000000
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Samsung Exynos5 G-Scaler device
-
-G-Scaler is used for scaling and color space conversion on Exynos5 SoCs.
-
-Required properties:
-- compatible: should be one of
- "samsung,exynos5250-gsc"
- "samsung,exynos5420-gsc"
- "samsung,exynos5433-gsc"
- "samsung,exynos5-gsc" (deprecated)
-- reg: should contain G-Scaler physical address location and length.
-- interrupts: should contain G-Scaler interrupt number
-
-Optional properties:
-- samsung,sysreg: handle to syscon used to control the system registers to
- set writeback input and destination
-
-Example:
-
-gsc_0: gsc@...00000 {
- compatible = "samsung,exynos5250-gsc";
- reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
-};
-
-Aliases:
-Each G-Scaler node should have a numbered alias in the aliases node,
-in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
-to retrieve the device IDs using "of_alias_get_id()" call.
-
-Example:
-
-aliases {
- gsc0 =&gsc_0;
- gsc1 =&gsc_1;
- gsc2 =&gsc_2;
- gsc3 =&gsc_3;
-};
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
new file mode 100644
index 000000000000..878397830a4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos5250-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC G-Scaler
+
+maintainers:
+ - Inki Dae <inki.dae@...sung.com>
+ - Krzysztof Kozlowski <krzk@...nel.org>
+ - Seung-Woo Kim <sw0312.kim@...sung.com
+
+description:
+ G-Scaler is used for scaling and color space conversion on Samsung Exynos
+ SoCs.
+
+ Each G-Scaler node should have a numbered alias in the aliases node, in the
+ form of gscN, N = 0...3.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - samsung,exynos5250-gsc
+ - samsung,exynos5420-gsc
+ - const: samsung,exynos5-gsc
+ - enum:
+ - samsung,exynos5433-gsc
+ - const: samsung,exynos5-gsc
+ deprecated: True
+
+ clocks:
+ minItems: 1
+ maxItems: 5
+
+ clock-names:
+ minItems: 1
+ maxItems: 5
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ samsung,sysreg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Syscon used to control the system registers to set writeback input and destination.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos5-gsc
+ - samsung,exynos5250-gsc
+ - samsung,exynos5420-gsc
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ items:
+ - const: gscl
+ else:
+ properties:
+ clocks:
+ minItems: 5
+ clock-names:
+ items:
+ - const: pclk
+ - const: aclk
+ - const: aclk_xiu
+ - const: aclk_gsclbend
+ - const: gsd
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5250.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ video-scaler@...00000 {
+ compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+ reg = <0x13e00000 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_gsc>;
+ clocks = <&clock CLK_GSCL0>;
+ clock-names = "gscl";
+ iommus = <&sysmmu_gsc0>;
+ };
--
2.34.1
Powered by blists - more mailing lists