linux-kernel - [PATCH 0/6] pinctrl: sunxi: Allwinner D1/D1s support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220626021148.56740-1-samuel@sholland.org>
Date:   Sat, 25 Jun 2022 21:11:41 -0500
From:   Samuel Holland <samuel@...lland.org>
To:     Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        Linus Walleij <linus.walleij@...aro.org>
Cc:     Samuel Holland <samuel@...lland.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Maxime Ripard <mripard@...nel.org>, Ondrej Jirman <x@....cz>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...ts.linux.dev
Subject: [PATCH 0/6] pinctrl: sunxi: Allwinner D1/D1s support

This series adds pinctrl support for the Allwinner D1/D1s SoCs. First,
it updates the I/O bias code to support the new mode found on the D1/D1s
(as well as some existing SoCs). Then it refactors the driver to support
the new register layout found on the D1/D1s. Finally, it adds the new
driver.

The code size impact of the dynamic register layout ends up being just
over 100 bytes:

   text    data     bss     dec     hex filename
  11293     564       0   11857    2e51 pinctrl-sunxi.o (patch 3)
  11405     564       0   11969    2ec1 pinctrl-sunxi.o (patch 6)

This series was tested on A64, H6, and D1.


Samuel Holland (6):
  dt-bindings: pinctrl: Add compatibles for Allwinner D1/D1s
  pinctrl: sunxi: Add I/O bias setting for H6 R-PIO
  pinctrl: sunxi: Support the 2.5V I/O bias mode
  pinctrl: sunxi: Refactor register/offset calculation
  pinctrl: sunxi: Make some layout parameters dynamic
  pinctrl: sunxi: Add driver for Allwinner D1/D1s

 .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  15 +
 drivers/pinctrl/sunxi/Kconfig                 |   5 +
 drivers/pinctrl/sunxi/Makefile                |   1 +
 drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c     | 860 ++++++++++++++++++
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c |   1 +
 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c   |   2 +-
 drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c   |   1 +
 drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c   |   2 +-
 drivers/pinctrl/sunxi/pinctrl-sunxi.c         | 156 +++-
 drivers/pinctrl/sunxi/pinctrl-sunxi.h         | 110 +--
 10 files changed, 1022 insertions(+), 131 deletions(-)
 create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c

-- 
2.35.1