| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Yrm+kH6NvTy5A9WO@kroah.com>
Date: Mon, 27 Jun 2022 16:28:32 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Lee Jones <lee.jones@...aro.org>
Cc: frank zago <frank@...o.net>, linux-kernel@...r.kernel.org,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Wolfram Sang <wsa@...nel.org>, Johan Hovold <johan@...nel.org>,
linux-usb@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
linux-gpio@...r.kernel.org, linux-i2c@...r.kernel.org
Subject: Re: [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in
I2C/SPI/GPIO mode
On Mon, Jun 27, 2022 at 03:04:32PM +0100, Lee Jones wrote:
> USB review please.
>
> > The CH341 is a multifunction chip, presenting 3 different USB PID. One
> >
> > of these functions is for I2C/SPI/GPIO. This new set of drivers will
> > manage I2C and GPIO.
> >
> > Signed-off-by: frank zago <frank@...o.net>
> > ---
> > MAINTAINERS | 7 +++
> > drivers/mfd/Kconfig | 10 +++++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/ch341-core.c | 90 +++++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/ch341.h | 18 ++++++++
> > 5 files changed, 126 insertions(+)
> > create mode 100644 drivers/mfd/ch341-core.c
> > create mode 100644 include/linux/mfd/ch341.h
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 43d3d07afccd..628eeaa9bf68 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -21475,6 +21475,13 @@ M: David Härdeman <david@...deman.nu>
> > S: Maintained
> > F: drivers/media/rc/winbond-cir.c
> >
> > +WINCHIPHEAD CH341 I2C/GPIO MFD DRIVER
> > +M: Frank Zago <frank@...o.net>
> > +L: linux-usb@...r.kernel.org
> > +S: Maintained
> > +F: drivers/mfd/ch341-core.c
> > +F: include/linux/mfd/ch341.h
> > +
> > WINSYSTEMS EBC-C384 WATCHDOG DRIVER
> > M: William Breathitt Gray <vilhelm.gray@...il.com>
> > L: linux-watchdog@...r.kernel.org
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 3b59456f5545..893acc821a42 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -1784,6 +1784,16 @@ config MFD_LOCHNAGAR
> > help
> > Support for Cirrus Logic Lochnagar audio development board.
> >
> > +config MFD_CH341
> > + tristate "WinChipHead CH341 in I2C/SPI/GPIO mode"
> > + depends on USB
> > + help
> > + If you say yes to this option, support for the CH341 series
> > + of chips, running in I2C/SPI/GPIO mode will be included.
> > +
> > + This driver can also be built as a module. If so, the
> > + module will be called ch341-core.
> > +
> > config MFD_ARIZONA
> > select REGMAP
> > select REGMAP_IRQ
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 858cacf659d6..fd615ab3929f 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -13,6 +13,7 @@ obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
> > obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o
> > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
> > obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o
> > +obj-$(CONFIG_MFD_CH341) += ch341-core.o
> > obj-$(CONFIG_MFD_CROS_EC_DEV) += cros_ec_dev.o
> > obj-$(CONFIG_MFD_ENE_KB3930) += ene-kb3930.o
> > obj-$(CONFIG_MFD_EXYNOS_LPASS) += exynos-lpass.o
> > diff --git a/drivers/mfd/ch341-core.c b/drivers/mfd/ch341-core.c
> > new file mode 100644
> > index 000000000000..f08a67dd6074
> > --- /dev/null
> > +++ b/drivers/mfd/ch341-core.c
> > @@ -0,0 +1,90 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Core driver for the CH341A, CH341B and CH341T in I2C/SPI/GPIO
> > + * mode. There are cell drivers available for I2C and GPIO. SPI is not
> > + * yet supported.
> > + *
> > + * Copyright 2022, Frank Zago
> > + * Copyright (c) 2017 Gunar Schorcht (gunar@...orcht.net)
> > + * Copyright (c) 2016 Tse Lun Bien
> > + * Copyright (c) 2014 Marco Gittler
> > + * Copyright (c) 2006-2007 Till Harbaum (Till@...baum.org)
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/ch341.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/slab.h>
> > +#include <linux/usb.h>
> > +
> > +static const struct mfd_cell ch341_devs[] = {
> > + {
> > + .name = "ch341-gpio",
> > + },
> > + {
> > + .name = "ch341-i2c",
> > + },
> > +};
> > +
> > +static int ch341_usb_probe(struct usb_interface *iface,
> > + const struct usb_device_id *usb_id)
> > +{
> > + struct usb_endpoint_descriptor *bulk_out;
> > + struct usb_endpoint_descriptor *bulk_in;
> > + struct usb_endpoint_descriptor *intr_in;
> > + struct ch341_ddata *ddata;
> > + int ret;
> > +
> > + ddata = devm_kzalloc(&iface->dev, sizeof(*ddata), GFP_KERNEL);
> > + if (!ddata)
> > + return -ENOMEM;
> > +
> > + ddata->usb_dev = interface_to_usbdev(iface);
> > + mutex_init(&ddata->usb_lock);
> > +
> > + ret = usb_find_common_endpoints(iface->cur_altsetting, &bulk_in,
> > + &bulk_out, &intr_in, NULL);
> > + if (ret) {
> > + dev_err(&iface->dev, "Could not find all endpoints\n");
> > + return -ENODEV;
> > + }
> > +
> > + ddata->ep_in = bulk_in->bEndpointAddress;
> > + ddata->ep_out = bulk_out->bEndpointAddress;
> > + ddata->ep_intr = intr_in->bEndpointAddress;
> > + ddata->ep_intr_interval = intr_in->bInterval;
> > +
> > + usb_set_intfdata(iface, ddata);
> > +
> > + ret = mfd_add_devices(&iface->dev, PLATFORM_DEVID_AUTO, ch341_devs,
> > + ARRAY_SIZE(ch341_devs), NULL, 0, NULL);
> > + if (ret)
> > + return dev_err_probe(&iface->dev, ret,
> > + "Failed to register child devices\n");
> > +
> > + return 0;
> > +}
> > +
> > +static void ch341_usb_disconnect(struct usb_interface *usb_if)
> > +{
> > + mfd_remove_devices(&usb_if->dev);
> > +}
> > +
> > +static const struct usb_device_id ch341_usb_table[] = {
> > + { USB_DEVICE(0x1a86, 0x5512) },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(usb, ch341_usb_table);
> > +
> > +static struct usb_driver ch341_usb_driver = {
> > + .name = "ch341-mfd",
> > + .id_table = ch341_usb_table,
> > + .probe = ch341_usb_probe,
> > + .disconnect = ch341_usb_disconnect,
> > +};
> > +module_usb_driver(ch341_usb_driver);
> > +
> > +MODULE_AUTHOR("Frank Zago <frank@...o.net>");
> > +MODULE_DESCRIPTION("CH341 USB to I2C/SPI/GPIO adapter");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/linux/mfd/ch341.h b/include/linux/mfd/ch341.h
> > new file mode 100644
> > index 000000000000..44f5da0720bd
> > --- /dev/null
> > +++ b/include/linux/mfd/ch341.h
> > @@ -0,0 +1,18 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/* Definitions for the CH341 driver */
> > +
> > +#include <linux/mutex.h>
> > +#include <linux/types.h>
> > +
> > +struct usb_device;
> > +struct usb_interface;
> > +
> > +struct ch341_ddata {
> > + struct usb_device *usb_dev;
> > + struct mutex usb_lock;
> > +
> > + int ep_in;
> > + int ep_out;
> > + int ep_intr;
> > + u8 ep_intr_interval;
> > +};
Looks sane enough, but doesn't actually do any USB data transfers, maybe
that happens somewhere else...
Acked-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Powered by blists - more mailing lists