| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220627163048.GA2311255@yilunxu-OptiPlex-7050>
Date: Tue, 28 Jun 2022 00:30:48 +0800
From: Xu Yilun <yilun.xu@...el.com>
To: "Zhang, Tianfei" <tianfei.zhang@...el.com>
Cc: Tom Rix <trix@...hat.com>,
"lee.jones@...aro.org" <lee.jones@...aro.org>,
"Wu, Hao" <hao.wu@...el.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-fpga@...r.kernel.org" <linux-fpga@...r.kernel.org>,
"Weight, Russell H" <russell.h.weight@...el.com>,
"matthew.gerlach@...ux.intel.com" <matthew.gerlach@...ux.intel.com>
Subject: Re: [PATCH v3 2/3] mfd: intel-m10-bmc: add PMCI driver
On Mon, Jun 27, 2022 at 10:03:35PM +0800, Zhang, Tianfei wrote:
>
>
> > -----Original Message-----
> > From: Tom Rix <trix@...hat.com>
> > Sent: Saturday, June 25, 2022 9:53 PM
> > To: Zhang, Tianfei <tianfei.zhang@...el.com>; Xu, Yilun <yilun.xu@...el.com>;
> > lee.jones@...aro.org
> > Cc: Wu, Hao <hao.wu@...el.com>; linux-kernel@...r.kernel.org; linux-
> > fpga@...r.kernel.org; Weight, Russell H <russell.h.weight@...el.com>;
> > matthew.gerlach@...ux.intel.com
> > Subject: Re: [PATCH v3 2/3] mfd: intel-m10-bmc: add PMCI driver
> >
> >
> > On 6/24/22 2:22 AM, Tianfei Zhang wrote:
> > > Adding a driver for the PMCI-base interface of Intel MAX10 BMC
> > > controller.
> > >
> > > PMCI(Platform Management Control Interface) is a software-visible
> > > interface, connected to card BMC which provided the basic
> > > functionality of read/write BMC register. On the other hand, this
> > > driver leverages the regmap APIs to support Intel specific Indirect
> > > Register Interface for register read/write on PMCI.
> > >
> > > Signed-off-by: Tianfei Zhang <tianfei.zhang@...el.com>
> > > Signed-off-by: Russ Weight <russell.h.weight@...el.com>
> > > Signed-off-by: Matthew Gerlach <matthew.gerlach@...ux.intel.com>
> > > ---
> > > v3:
> > > - create a new driver for intel-m10-bmc-pmci driver
> > > - remove the regmap_access_table
> > > - create a new file for sysfs-driver-intel-m10-bmc-pmci ABI
> > > v2:
> > > - fix compile warning reported by lkp
> > > - use regmap API for Indirect Register Interface.
> > > ---
> > > .../testing/sysfs-driver-intel-m10-bmc-pmci | 36 +++
> > > drivers/mfd/Kconfig | 10 +
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/intel-m10-bmc-pmci.c | 277 ++++++++++++++++++
> > > include/linux/mfd/intel-m10-bmc.h | 8 +
> > > 5 files changed, 332 insertions(+)
> > > create mode 100644 Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-
> > pmci
> > > create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c
> > >
> > > diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-pmci
> > > b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-pmci
> > > new file mode 100644
> > > index 000000000000..03371b8022ae
> > > --- /dev/null
> > > +++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-pmci
> > > @@ -0,0 +1,36 @@
> > > +What: /sys/bus/dfl/drivers/dfl-pmci-
> > bmc/dfl_dev.X/bmc_version
> > > +Date: June 2022
> > > +KernelVersion: 5.19
> > > +Contact: Tianfei Zhang <tianfei.zhang@...el.com>
> > > +Description: Read only. Returns the hardware build version of Intel
> > > + MAX10 BMC chip.
> > > + Format: "0x%x".
> > > +
> > > +What: /sys/bus/dfl/drivers/dfl-pmci-
> > bmc/dfl_dev.X/bmcfw_version
> > > +Date: June 2022
> > > +KernelVersion: 5.19
> > > +Contact: Tianfei Zhang <tianfei.zhang@...el.com>
> > > +Description: Read only. Returns the firmware version of Intel MAX10
> > > + BMC chip.
> > > + Format: "0x%x".
> > > +
> > > +What: /sys/bus/dfl/drivers/dfl-pmci-
> > bmc/dfl_dev.X/mac_address
> > > +Date: June 2022
> > > +KernelVersion: 5.19
> > > +Contact: Tianfei Zhang <tianfei.zhang@...el.com>
> > > +Description: Read only. Returns the first MAC address in a block
> > > + of sequential MAC addresses assigned to the board
> > > + that is managed by the Intel MAX10 BMC. It is stored in
> > > + FLASH storage and is mirrored in the MAX10 BMC register
> > > + space.
> > > + Format: "%02x:%02x:%02x:%02x:%02x:%02x".
> > > +
> > > +What: /sys/bus/dfl/drivers/dfl-pmci-
> > bmc/dfl_dev.X/mac_count
> > > +Date: June 2022
> > > +KernelVersion: 5.19
> > > +Contact: Tianfei Zhang <tianfei.zhang@...el.com>
> > > +Description: Read only. Returns the number of sequential MAC
> > > + addresses assigned to the board managed by the Intel
> > > + MAX10 BMC. This value is stored in FLASH and is mirrored
> > > + in the MAX10 BMC register space.
> > > + Format: "%u".
> >
> > This file looks like a duplicate at sys-driver-intel-m10-bmc.
> >
> > So the show commands below are duplicates.
>
> Yes, I agree that the file " sysfs-driver-intel-m10-bmc" and " sysfs-driver-intel-m10-bmc-pmci" are duplicates, I will combine those into one.
> >
> > Refactoring is necessary.
> >
> > My recommendation is the existing intel-m10-bmc.c hold the common parts.
> >
> > intel-m10-bmc.c is spi, so the spi specific bits be split to new intel-m10-bmc-spi.c
>
> In my V2 patch, I split the intel-m10-bmc.c into intel-m10-bmc-core.c and intel-m10-bmc-pmci.c, intel-m10-bmc-core.c hold the command parts.
> But Yilun suggested that it is only 40~50 line codes are duplicates, it is no necessary to hold the common parts. In V3 patch, I directly write a separate
> driver for intel-m10-bmc-pmci driver.
Hi tianfei:
I see the driver still includes intel-m10-bmc.h, and uses
struct intel_m10bmc. So I don't think this is a separate driver.
I think to be a separate driver, it should remove the dependency
to intel_m10bmc. The subdevice drivers should also remove the dependency
to intel_m10bmc. So maybe you need to estimate whether to make the
separate driver or still reuse the intel-m10-bmc.
Thanks,
Yilun
>
> >
> > Tom
> >
> > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > > 3b59456f5545..ee196c41a9db 100644
> > > --- a/drivers/mfd/Kconfig
> > > +++ b/drivers/mfd/Kconfig
> > > @@ -2171,6 +2171,16 @@ config MFD_INTEL_M10_BMC
> > > additional drivers must be enabled in order to use the functionality
> > > of the device.
> > >
> > > +config MFD_INTEL_M10_BMC_PMCI
> > > + tristate "Intel MAX 10 Board Management Controller with PMCI"
> > > + depends on FPGA_DFL
> > > + help
> > > + Support for the Intel MAX 10 board management controller via PMCI.
> > > +
> > > + This driver provides common support for accessing the device,
> > > + additional drivers must be enabled in order to use the functionality
> > > + of the device.
> > > +
> > > config MFD_RSMU_I2C
> > > tristate "Renesas Synchronization Management Unit with I2C"
> > > depends on I2C && OF
> > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > > 858cacf659d6..f737bd7b7d98 100644
> > > --- a/drivers/mfd/Makefile
> > > +++ b/drivers/mfd/Makefile
> > > @@ -267,6 +267,7 @@ obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-
> > pm8008.o
> > > obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> > > obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
> > > obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
> > > +obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI) += intel-m10-bmc-pmci.o
> > >
> > > obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
> > > obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
> > > diff --git a/drivers/mfd/intel-m10-bmc-pmci.c
> > > b/drivers/mfd/intel-m10-bmc-pmci.c
> > > new file mode 100644
> > > index 000000000000..93eca4483ac7
> > > --- /dev/null
> > > +++ b/drivers/mfd/intel-m10-bmc-pmci.c
> > > @@ -0,0 +1,277 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * PMCI-based interface to MAX10 BMC
> > > + *
> > > + * Copyright (C) 2020-2022 Intel Corporation, Inc.
> > > + *
> > > + */
> > > +#include <linux/bitfield.h>
> > > +#include <linux/dfl.h>
> > > +#include <linux/mfd/intel-m10-bmc.h>
> > > +#include <linux/module.h>
> > > +#include <linux/regmap.h>
> > > +#include <linux/mfd/core.h>
> > > +
> > > +#define M10BMC_PMCI_INDIRECT_BASE 0x400
> > > +#define INDIRECT_INT_US 1
> > > +#define INDIRECT_TIMEOUT_US 10000
> > > +
> > > +#define INDIRECT_CMD_OFF 0x0
> > > +#define INDIRECT_CMD_RD BIT(0)
> > > +#define INDIRECT_CMD_WR BIT(1)
> > > +#define INDIRECT_CMD_ACK BIT(2)
> > > +
> > > +#define INDIRECT_ADDR_OFF 0x4
> > > +#define INDIRECT_RD_OFF 0x8
> > > +#define INDIRECT_WR_OFF 0xc
> > > +
> > > +struct indirect_ctx {
> > > + void __iomem *base;
> > > + struct device *dev;
> > > + unsigned long sleep_us;
> > > + unsigned long timeout_us;
> > > +};
> > > +
> > > +struct pmci_device {
> > > + void __iomem *base;
> > > + struct device *dev;
> > > + struct intel_m10bmc m10bmc;
> > > + struct indirect_ctx ctx;
> > > +};
> > > +
> > > +static int pmci_indirect_bus_clr_cmd(struct indirect_ctx *ctx) {
> > > + unsigned int cmd;
> > > + int ret;
> > > +
> > > + writel(0, ctx->base + INDIRECT_CMD_OFF);
> > > + ret = readl_poll_timeout((ctx->base + INDIRECT_CMD_OFF), cmd,
> > > + (!cmd), ctx->sleep_us, ctx->timeout_us);
> > > + if (ret)
> > > + dev_err(ctx->dev, "%s timed out on clearing cmd 0x%xn",
> > __func__,
> > > +cmd);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int pmci_indirect_bus_reg_read(void *context, unsigned int reg,
> > > + unsigned int *val)
> > > +{
> > > + struct indirect_ctx *ctx = context;
> > > + unsigned int cmd;
> > > + int ret;
> > > +
> > > + cmd = readl(ctx->base + INDIRECT_CMD_OFF);
> > > + if (cmd)
> > > + dev_warn(ctx->dev, "%s non-zero cmd 0x%x\n", __func__,
> > cmd);
> > > +
> > > + writel(reg, ctx->base + INDIRECT_ADDR_OFF);
> > > + writel(INDIRECT_CMD_RD, ctx->base + INDIRECT_CMD_OFF);
> > > + ret = readl_poll_timeout((ctx->base + INDIRECT_CMD_OFF), cmd,
> > > + (cmd & INDIRECT_CMD_ACK), ctx->sleep_us,
> > > + ctx->timeout_us);
> > > + if (ret) {
> > > + dev_err(ctx->dev, "%s timed out on reg 0x%x cmd 0x%x\n",
> > __func__, reg, cmd);
> > > + goto out;
> > > + }
> > > +
> > > + *val = readl(ctx->base + INDIRECT_RD_OFF);
> > > +
> > > + if (pmci_indirect_bus_clr_cmd(ctx))
> > > + ret = -ETIMEDOUT;
> > > +
> > > +out:
> > > + return ret;
> > > +}
> > > +
> > > +static int pmci_indirect_bus_reg_write(void *context, unsigned int reg,
> > > + unsigned int val)
> > > +{
> > > + struct indirect_ctx *ctx = context;
> > > + unsigned int cmd;
> > > + int ret;
> > > +
> > > + cmd = readl(ctx->base + INDIRECT_CMD_OFF);
> > > + if (cmd)
> > > + dev_warn(ctx->dev, "%s non-zero cmd 0x%x\n", __func__,
> > cmd);
> > > +
> > > + writel(val, ctx->base + INDIRECT_WR_OFF);
> > > + writel(reg, ctx->base + INDIRECT_ADDR_OFF);
> > > + writel(INDIRECT_CMD_WR, ctx->base + INDIRECT_CMD_OFF);
> > > + ret = readl_poll_timeout((ctx->base + INDIRECT_CMD_OFF), cmd,
> > > + (cmd & INDIRECT_CMD_ACK), ctx->sleep_us,
> > > + ctx->timeout_us);
> > > + if (ret) {
> > > + dev_err(ctx->dev, "%s timed out on reg 0x%x cmd 0x%x\n",
> > __func__, reg, cmd);
> > > + goto out;
> > > + }
> > > +
> > > + if (pmci_indirect_bus_clr_cmd(ctx))
> > > + ret = -ETIMEDOUT;
> > > +
> > > +out:
> > > + return ret;
> > > +}
> > > +
> > > +static const struct regmap_bus pmci_indirect_bus = {
> > > + .reg_write = pmci_indirect_bus_reg_write,
> > > + .reg_read = pmci_indirect_bus_reg_read, };
> > > +
> > > +static struct mfd_cell m10bmc_n6000_bmc_subdevs[] = {
> > > + { .name = "n6000bmc-hwmon" },
> > > + { .name = "n6000bmc-sec-update" }
> > > +};
> > > +
> > > +static struct regmap_config m10bmc_pmci_regmap_config = {
> > > + .reg_bits = 32,
> > > + .reg_stride = 4,
> > > + .val_bits = 32,
> > > + .max_register = M10BMC_PMCI_SYS_END, };
> > > +
> > > +static ssize_t bmc_version_show(struct device *dev,
> > > + struct device_attribute *attr, char *buf) {
> > > + struct intel_m10bmc *ddata = dev_get_drvdata(dev);
> > > + unsigned int val;
> > > + int ret;
> > > +
> > > + ret = m10bmc_sys_read(ddata, M10BMC_PMCI_BUILD_VER, &val);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + return sprintf(buf, "0x%x\n", val);
> > > +}
> > > +static DEVICE_ATTR_RO(bmc_version);
> > > +
> > > +static ssize_t bmcfw_version_show(struct device *dev,
> > > + struct device_attribute *attr, char *buf) {
> > > + struct intel_m10bmc *ddata = dev_get_drvdata(dev);
> > > + unsigned int val;
> > > + int ret;
> > > +
> > > + ret = m10bmc_sys_read(ddata, NIOS2_PMCI_FW_VERSION, &val);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + return sprintf(buf, "0x%x\n", val);
> > > +}
> > > +static DEVICE_ATTR_RO(bmcfw_version);
> > > +
> > > +static ssize_t mac_address_show(struct device *dev,
> > > + struct device_attribute *attr, char *buf) {
> > > + struct intel_m10bmc *max10 = dev_get_drvdata(dev);
> > > + unsigned int macaddr_low, macaddr_high;
> > > + int ret;
> > > +
> > > + ret = m10bmc_sys_read(max10, M10BMC_PMCI_MAC_LOW,
> > &macaddr_low);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = m10bmc_sys_read(max10, M10BMC_PMCI_MAC_HIGH,
> > &macaddr_high);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + return sysfs_emit(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
> > > + (u8)FIELD_GET(M10BMC_MAC_BYTE1, macaddr_low),
> > > + (u8)FIELD_GET(M10BMC_MAC_BYTE2, macaddr_low),
> > > + (u8)FIELD_GET(M10BMC_MAC_BYTE3, macaddr_low),
> > > + (u8)FIELD_GET(M10BMC_MAC_BYTE4, macaddr_low),
> > > + (u8)FIELD_GET(M10BMC_MAC_BYTE5,
> > macaddr_high),
> > > + (u8)FIELD_GET(M10BMC_MAC_BYTE6,
> > macaddr_high)); } static
> > > +DEVICE_ATTR_RO(mac_address);
> > > +
> > > +static ssize_t mac_count_show(struct device *dev,
> > > + struct device_attribute *attr, char *buf) {
> > > + struct intel_m10bmc *max10 = dev_get_drvdata(dev);
> > > + unsigned int macaddr_high;
> > > + int ret;
> > > +
> > > + ret = m10bmc_sys_read(max10, M10BMC_PMCI_MAC_HIGH,
> > &macaddr_high);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + return sysfs_emit(buf, "%u\n",
> > > + (u8)FIELD_GET(M10BMC_MAC_COUNT,
> > macaddr_high)); } static
> > > +DEVICE_ATTR_RO(mac_count);
> > > +
> > > +static struct attribute *m10bmc_attrs[] = {
> > > + &dev_attr_bmc_version.attr,
> > > + &dev_attr_bmcfw_version.attr,
> > > + &dev_attr_mac_address.attr,
> > > + &dev_attr_mac_count.attr,
> > > + NULL,
> > > +};
> > > +ATTRIBUTE_GROUPS(m10bmc);
> > > +
> > > +static int pmci_probe(struct dfl_device *ddev) {
> > > + struct device *dev = &ddev->dev;
> > > + struct mfd_cell *cells;
> > > + struct pmci_device *pmci;
> > > + int ret, n_cell;
> > > +
> > > + pmci = devm_kzalloc(dev, sizeof(*pmci), GFP_KERNEL);
> > > + if (!pmci)
> > > + return -ENOMEM;
> > > +
> > > + pmci->m10bmc.dev = dev;
> > > + pmci->dev = dev;
> > > +
> > > + pmci->base = devm_ioremap_resource(dev, &ddev->mmio_res);
> > > + if (IS_ERR(pmci->base))
> > > + return PTR_ERR(pmci->base);
> > > +
> > > + dev_set_drvdata(dev, &pmci->m10bmc);
> > > +
> > > + pmci->ctx.base = pmci->base + M10BMC_PMCI_INDIRECT_BASE;
> > > + pmci->ctx.sleep_us = INDIRECT_INT_US;
> > > + pmci->ctx.timeout_us = INDIRECT_TIMEOUT_US;
> > > + pmci->ctx.dev = dev;
> > > + pmci->m10bmc.regmap =
> > > + devm_regmap_init(dev,
> > > + &pmci_indirect_bus,
> > > + &pmci->ctx,
> > > + &m10bmc_pmci_regmap_config);
> > > + if (IS_ERR(pmci->m10bmc.regmap))
> > > + return PTR_ERR(pmci->m10bmc.regmap);
> > > +
> > > + cells = m10bmc_n6000_bmc_subdevs;
> > > + n_cell = ARRAY_SIZE(m10bmc_n6000_bmc_subdevs);
> > > +
> > > + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO,
> > > + cells, n_cell, NULL, 0, NULL);
> > > + if (ret)
> > > + dev_err(dev, "Failed to register sub-devices: %d\n",
> > > + ret);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +#define FME_FEATURE_ID_PMCI_BMC 0x12
> > > +
> > > +static const struct dfl_device_id pmci_ids[] = {
> > > + { FME_ID, FME_FEATURE_ID_PMCI_BMC },
> > > + { }
> > > +};
> > > +MODULE_DEVICE_TABLE(dfl, pmci_ids);
> > > +
> > > +static struct dfl_driver pmci_driver = {
> > > + .drv = {
> > > + .name = "dfl-pmci-bmc",
> > > + .dev_groups = m10bmc_groups,
> > > + },
> > > + .id_table = pmci_ids,
> > > + .probe = pmci_probe,
> > > +};
> > > +
> > > +module_dfl_driver(pmci_driver);
> > > +
> > > +MODULE_DESCRIPTION("MAX10 BMC PMCI-based interface");
> > > +MODULE_AUTHOR("Intel Corporation"); MODULE_LICENSE("GPL");
> > > diff --git a/include/linux/mfd/intel-m10-bmc.h
> > > b/include/linux/mfd/intel-m10-bmc.h
> > > index f0044b14136e..7b58af207b72 100644
> > > --- a/include/linux/mfd/intel-m10-bmc.h
> > > +++ b/include/linux/mfd/intel-m10-bmc.h
> > > @@ -118,6 +118,14 @@
> > > /* Address of 4KB inverted bit vector containing staging area FLASH count */
> > > #define STAGING_FLASH_COUNT 0x17ffb000
> > >
> > > +#define M10BMC_PMCI_SYS_BASE 0x0
> > > +#define M10BMC_PMCI_SYS_END 0xfff
> > > +
> > > +#define M10BMC_PMCI_BUILD_VER 0x0
> > > +#define NIOS2_PMCI_FW_VERSION 0x4
> > > +#define M10BMC_PMCI_MAC_LOW 0x20
> > > +#define M10BMC_PMCI_MAC_HIGH 0x24
> > > +
> > > /**
> > > * struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
> > > * @dev: this device
>
Powered by blists - more mailing lists