lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 27 Jun 2022 22:23:20 +0000 From: <Conor.Dooley@...rochip.com> To: <fancer.lancer@...il.com>, <mail@...chuod.ie> CC: <airlied@...ux.ie>, <daniel@...ll.ch>, <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>, <thierry.reding@...il.com>, <sam@...nborg.org>, <Eugeniy.Paltsev@...opsys.com>, <vkoul@...nel.org>, <lgirdwood@...il.com>, <broonie@...nel.org>, <daniel.lezcano@...aro.org>, <palmer@...belt.com>, <palmer@...osinc.com>, <tglx@...utronix.de>, <paul.walmsley@...ive.com>, <aou@...s.berkeley.edu>, <masahiroy@...nel.org>, <damien.lemoal@...nsource.wdc.com>, <geert@...ux-m68k.org>, <niklas.cassel@....com>, <dillon.minfei@...il.com>, <jee.heng.sia@...el.com>, <joabreu@...opsys.com>, <dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>, <dmaengine@...r.kernel.org>, <alsa-devel@...a-project.org>, <linux-spi@...r.kernel.org>, <linux-riscv@...ts.infradead.org> Subject: Re: [PATCH v2 05/16] dt-bindings: dma: add Canaan k210 to Synopsys DesignWare DMA On 27/06/2022 22:34, Serge Semin wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Mon, Jun 27, 2022 at 08:39:53PM +0100, Conor Dooley wrote: >> From: Conor Dooley <conor.dooley@...rochip.com> >> >> The Canaan k210 apparently has a Sysnopsys Designware AXI DMA >> controller, but according to the documentation & devicetree it has 6 >> interrupts rather than the standard one. Add a custom compatible that >> supports the 6 interrupt configuration which falls back to the standard >> binding which is currently the one in use in the devicetree entry. >> >> Link: https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf #Page 58 > > I believe what you've got here is the per-channel IRQs, which is > activated for the DW AXI DMAC by setting IP-core synthesize parameter > DMAX_INTR_IO_TYPE=1 (CHANNEL AND COMMONREG). That's why there are six > IRQ signals and six DMA-channels available. > > Seeing such setting isn't the Canaan k210 specific, but is the DW AXI > DMA controller common property, what would be right in this case is to > unconditionally extend the number of IRQs in the DT-bindings schema. Cool, willdo. Thanks for all the great feedback. Conor. > > Please note the DW AXI DMAC driver currently doesn't support the > per-channel IRQs. So most likely the DMA will only work with using the > channel 0 only. > > -Sergey > >> Signed-off-by: Conor Dooley <conor.dooley@...rochip.com> >> --- >> .../bindings/dma/snps,dw-axi-dmac.yaml | 35 ++++++++++++++----- >> 1 file changed, 26 insertions(+), 9 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml >> index 4324a94b26b2..bc85598151ef 100644 >> --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml >> +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml >> @@ -18,9 +18,13 @@ allOf: >> >> properties: >> compatible: >> - enum: >> - - snps,axi-dma-1.01a >> - - intel,kmb-axi-dma >> + oneOf: >> + - items: >> + - const: canaan,k210-axi-dma >> + - const: snps,axi-dma-1.01a >> + - enum: >> + - snps,axi-dma-1.01a >> + - intel,kmb-axi-dma >> >> reg: >> minItems: 1 >> @@ -33,9 +37,6 @@ properties: >> - const: axidma_ctrl_regs >> - const: axidma_apb_regs >> >> - interrupts: >> - maxItems: 1 >> - >> clocks: >> items: >> - description: Bus Clock >> @@ -92,6 +93,22 @@ properties: >> minimum: 1 >> maximum: 256 >> >> +if: >> + properties: >> + compatible: >> + contains: >> + const: canaan,k210-axi-dma >> + >> +then: >> + properties: >> + interrupts: >> + maxItems: 6 >> + >> +else: >> + properties: >> + interrupts: >> + maxItems: 1 >> + >> required: >> - compatible >> - reg >> @@ -105,7 +122,7 @@ required: >> - snps,priority >> - snps,block-size >> >> -additionalProperties: false >> +unevaluatedProperties: false >> >> examples: >> - | >> @@ -113,12 +130,12 @@ examples: >> #include <dt-bindings/interrupt-controller/irq.h> >> /* example with snps,dw-axi-dmac */ >> dmac: dma-controller@...00 { >> - compatible = "snps,axi-dma-1.01a"; >> + compatible = "canaan,k210-axi-dma", "snps,axi-dma-1.01a"; >> reg = <0x80000 0x400>; >> clocks = <&core_clk>, <&cfgr_clk>; >> clock-names = "core-clk", "cfgr-clk"; >> interrupt-parent = <&intc>; >> - interrupts = <27>; >> + interrupts = <27>, <28>, <29>, <30>, <31>, <32>; >> #dma-cells = <1>; >> dma-channels = <4>; >> snps,dma-masters = <2>; >> -- >> 2.36.1 >>
Powered by blists - more mailing lists