linux-kernel - [PATCH 5.15 084/135] xhci: turn off port power in shutdown

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220627111940.598796004@linuxfoundation.org>
Date:   Mon, 27 Jun 2022 13:21:31 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Mathias Nyman <mathias.nyman@...ux.intel.com>
Subject: [PATCH 5.15 084/135] xhci: turn off port power in shutdown

From: Mathias Nyman <mathias.nyman@...ux.intel.com>

commit 83810f84ecf11dfc5a9414a8b762c3501b328185 upstream.

If ports are not turned off in shutdown then runtime suspended
self-powered USB devices may survive in U3 link state over S5.

During subsequent boot, if firmware sends an IPC command to program
the port in DISCONNECT state, it will time out, causing significant
delay in the boot time.

Turning off roothub port power is also recommended in xhci
specification 4.19.4 "Port Power" in the additional note.

Cc: stable@...r.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Link: https://lore.kernel.org/r/20220623111945.1557702-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/usb/host/xhci-hub.c |    2 +-
 drivers/usb/host/xhci.c     |   15 +++++++++++++--
 drivers/usb/host/xhci.h     |    2 ++
 3 files changed, 16 insertions(+), 3 deletions(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -652,7 +652,7 @@ struct xhci_hub *xhci_get_rhub(struct us
  * It will release and re-aquire the lock while calling ACPI
  * method.
  */
-static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
+void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd,
 				u16 index, bool on, unsigned long *flags)
 	__must_hold(&xhci->lock)
 {
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -774,6 +774,8 @@ static void xhci_stop(struct usb_hcd *hc
 void xhci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned long flags;
+	int i;
 
 	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
 		usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
@@ -789,12 +791,21 @@ void xhci_shutdown(struct usb_hcd *hcd)
 		del_timer_sync(&xhci->shared_hcd->rh_timer);
 	}
 
-	spin_lock_irq(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 	xhci_halt(xhci);
+
+	/* Power off USB2 ports*/
+	for (i = 0; i < xhci->usb2_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->main_hcd, i, false, &flags);
+
+	/* Power off USB3 ports*/
+	for (i = 0; i < xhci->usb3_rhub.num_ports; i++)
+		xhci_set_port_power(xhci, xhci->shared_hcd, i, false, &flags);
+
 	/* Workaround for spurious wakeups at shutdown with HSW */
 	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
 		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
-	spin_unlock_irq(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	xhci_cleanup_msix(xhci);
 
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2174,6 +2174,8 @@ int xhci_hub_control(struct usb_hcd *hcd
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
 int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
 struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
+void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index,
+			 bool on, unsigned long *flags);
 
 void xhci_hc_died(struct xhci_hcd *xhci);