linux-kernel - [PATCH v1 3/9] dt-bindings: reset: intel,rcu-gw: Update bindings for "legacy" SoCs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 28 Jun 2022 14:44:35 +0200
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
        p.zabel@...gutronix.de
Cc:     linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org,
        vkoul@...nel.org, kishon@...com, rtanwar@...linear.com,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v1 3/9] dt-bindings: reset: intel,rcu-gw: Update bindings for "legacy" SoCs

The Lantiq Amazon-SE, Danube, xRX100 and xRX200 SoCs have up to two USB2
PHYs which are part of the RCU register space. The RCU registers on
these SoCs are using big endian. Update the binding for these SoCs to
properly describe this IP:
- Add compatible strings for Amazon-SE, Danube and xRX100
- Rename the xRX200 compatible string (which is not used anywhere) and
  switch to the one previously documented in mips/lantiq/rcu.txt
- Allow usage of "simple-mfd" and "syscon" in the compatible string so the
  child devices (USB2 PHYs) can be described
- Allow #address-cells and #size-cells to be set to 1 for describing the
  child devices (USB2 PHYs)
- #reset-cells must always be 3 (offset, reset bit and status bit) on the
  legacy SoCs while LGM uses a fixed value of 2 (offset and reset bit -
  status bit is always identical to the reset bit).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
 .../bindings/reset/intel,rcu-gw.yaml          | 84 +++++++++++++++++--
 1 file changed, 79 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index be64f8597710..b90913c7b7d3 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -11,9 +11,16 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - intel,rcu-lgm
-      - intel,rcu-xrx200
+    oneOf:
+      - items:
+          - enum:
+              - lantiq,ase-rcu
+              - lantiq,danube-rcu
+              - lantiq,xrx100-rcu
+              - lantiq,xrx200-rcu
+          - const: simple-mfd
+          - const: syscon
+      - const: intel,rcu-lgm
 
   reg:
     description: Reset controller registers.
@@ -33,8 +40,6 @@ properties:
         maximum: 31
 
   "#reset-cells":
-    minimum: 2
-    maximum: 3
     description: |
       First cell is reset request register offset.
       Second cell is bit offset in reset request register.
@@ -43,6 +48,43 @@ properties:
       reset request and reset status registers is same. Whereas
       3 for legacy SoCs as bit offset differs.
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  big-endian: true
+
+patternProperties:
+  "^usb2-phy@[0-9a-f]+$":
+    type: object
+    $ref: "../phy/lantiq,xway-rcu-usb2-phy.yaml"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: intel,rcu-lgm
+    then:
+      properties:
+        "#reset-cells":
+          const: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - lantiq,ase-rcu
+              - lantiq,danube-rcu
+              - lantiq,xrx100-rcu
+              - lantiq,xrx200-rcu
+    then:
+      properties:
+        "#reset-cells":
+          const: 3
+
 required:
   - compatible
   - reg
@@ -67,3 +109,35 @@ examples:
         #pwm-cells = <2>;
         resets = <&rcu0 0x30 21>;
     };
+  - |
+    rcu_xrx200: rcu@...000 {
+        compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
+        reg = <0x203000 0x100>;
+        big-endian;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        #reset-cells = <3>;
+        intel,global-reset = <0x10 30 29>;
+
+        usb_phy0: usb2-phy@18 {
+            compatible = "lantiq,xrx200-usb2-phy";
+            reg = <0x18 4>, <0x38 4>;
+            status = "disabled";
+
+            resets = <&rcu_xrx200 0x48 4 4>, <&rcu_xrx200 0x10 4 4>;
+            reset-names = "phy", "ctrl";
+            #phy-cells = <0>;
+        };
+
+        usb_phy1: usb2-phy@34 {
+            compatible = "lantiq,xrx200-usb2-phy";
+            reg = <0x34 4>, <0x3c 4>;
+            status = "disabled";
+
+            resets = <&rcu_xrx200 0x48 5 5>, <&rcu_xrx200 0x10 4 4>;
+            reset-names = "phy", "ctrl";
+            #phy-cells = <0>;
+        };
+    };
-- 
2.36.1