[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220628081709.829811-7-colin.foster@in-advantage.com>
Date: Tue, 28 Jun 2022 01:17:06 -0700
From: Colin Foster <colin.foster@...advantage.com>
To: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-gpio@...r.kernel.org
Cc: Vladimir Oltean <vladimir.oltean@....com>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
UNGLinuxDriver@...rochip.com,
Linus Walleij <linus.walleij@...aro.org>,
Wolfram Sang <wsa@...nel.org>,
Terry Bowman <terry.bowman@....com>,
Andy Shevchenko <andy.shevchenko@...il.com>
Subject: [PATCH v11 net-next 6/9] pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration
There are a few Ocelot chips that can contain SGPIO logic, but can be
controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In
the externally controlled configurations these registers are not
memory-mapped.
Add support for these non-memory-mapped configurations.
Signed-off-by: Colin Foster <colin.foster@...advantage.com>
---
drivers/pinctrl/pinctrl-microchip-sgpio.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 47b479c1fb7c..c924605f9d03 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -12,6 +12,7 @@
#include <linux/clk.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
+#include <linux/mfd/ocelot.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pinctrl/pinmux.h>
@@ -904,7 +905,6 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
struct reset_control *reset;
struct sgpio_priv *priv;
struct clk *clk;
- u32 __iomem *regs;
u32 val;
struct regmap_config regmap_config = {
.reg_bits = 32,
@@ -937,11 +937,8 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
return -EINVAL;
}
- regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(regs))
- return PTR_ERR(regs);
-
- priv->regs = devm_regmap_init_mmio(dev, regs, ®map_config);
+ priv->regs = ocelot_platform_init_regmap_from_resource(pdev, 0,
+ ®map_config);
if (IS_ERR(priv->regs))
return PTR_ERR(priv->regs);
@@ -1013,3 +1010,4 @@ builtin_platform_driver(microchip_sgpio_pinctrl_driver);
MODULE_DESCRIPTION("Microchip SGPIO Pinctrl Driver");
MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(MFD_OCELOT);
--
2.25.1
Powered by blists - more mailing lists