linux-kernel - [PATCH v3 3/6] media: ov5693: rename clk into xvclk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220629152933.422990-4-tommaso.merciai@amarulasolutions.com>
Date:   Wed, 29 Jun 2022 17:29:30 +0200
From:   Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
To:     tommaso.merciai@...rulasolutions.com
Cc:     linuxfancy@...glegroups.com, linux-amarula@...rulasolutions.com,
        quentin.schulz@...obroma-systems.com,
        Daniel Scally <djrscally@...il.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 3/6] media: ov5693: rename clk into xvclk

Rename clk pdata pointer into xvclk (system clock input).
Same for clk_rate into xvclk_rate. This is more explicit

Signed-off-by: Tommaso Merciai <tommaso.merciai@...rulasolutions.com>
---
 drivers/media/i2c/ov5693.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/media/i2c/ov5693.c b/drivers/media/i2c/ov5693.c
index 9e84468d920e..d2adc5513a21 100644
--- a/drivers/media/i2c/ov5693.c
+++ b/drivers/media/i2c/ov5693.c
@@ -157,7 +157,7 @@ struct ov5693_device {
 	struct gpio_desc *reset;
 	struct gpio_desc *powerdown;
 	struct regulator_bulk_data supplies[OV5693_NUM_SUPPLIES];
-	struct clk *clk;
+	struct clk *xvclk;
 
 	struct ov5693_mode {
 		struct v4l2_rect crop;
@@ -794,7 +794,7 @@ static void ov5693_sensor_powerdown(struct ov5693_device *ov5693)
 
 	regulator_bulk_disable(OV5693_NUM_SUPPLIES, ov5693->supplies);
 
-	clk_disable_unprepare(ov5693->clk);
+	clk_disable_unprepare(ov5693->xvclk);
 }
 
 static int ov5693_sensor_powerup(struct ov5693_device *ov5693)
@@ -804,7 +804,7 @@ static int ov5693_sensor_powerup(struct ov5693_device *ov5693)
 	gpiod_set_value_cansleep(ov5693->reset, 1);
 	gpiod_set_value_cansleep(ov5693->powerdown, 1);
 
-	ret = clk_prepare_enable(ov5693->clk);
+	ret = clk_prepare_enable(ov5693->xvclk);
 	if (ret) {
 		dev_err(ov5693->dev, "Failed to enable clk\n");
 		goto fail_power;
@@ -1390,7 +1390,7 @@ static int ov5693_check_hwcfg(struct ov5693_device *ov5693)
 static int ov5693_probe(struct i2c_client *client)
 {
 	struct ov5693_device *ov5693;
-	u32 clk_rate;
+	u32 xvclk_rate;
 	int ret = 0;
 
 	ov5693 = devm_kzalloc(&client->dev, sizeof(*ov5693), GFP_KERNEL);
@@ -1408,16 +1408,16 @@ static int ov5693_probe(struct i2c_client *client)
 
 	v4l2_i2c_subdev_init(&ov5693->sd, client, &ov5693_ops);
 
-	ov5693->clk = devm_clk_get(&client->dev, "xvclk");
-	if (IS_ERR(ov5693->clk)) {
+	ov5693->xvclk = devm_clk_get(&client->dev, "xvclk");
+	if (IS_ERR(ov5693->xvclk)) {
 		dev_err(&client->dev, "Error getting clock\n");
-		return PTR_ERR(ov5693->clk);
+		return PTR_ERR(ov5693->xvclk);
 	}
 
-	clk_rate = clk_get_rate(ov5693->clk);
-	if (clk_rate != OV5693_XVCLK_FREQ)
+	xvclk_rate = clk_get_rate(ov5693->xvclk);
+	if (xvclk_rate != OV5693_XVCLK_FREQ)
 		dev_warn(&client->dev, "Found clk freq %u, expected %u\n",
-			 clk_rate, OV5693_XVCLK_FREQ);
+			 xvclk_rate, OV5693_XVCLK_FREQ);
 
 	ret = ov5693_configure_gpios(ov5693);
 	if (ret)
-- 
2.25.1