| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFqt6zYOWURi-U6gsKTf7jjpGjMn0WqeBz1zm-5DAFDQ+Go2xw@mail.gmail.com>
Date: Thu, 30 Jun 2022 06:27:34 +0530
From: Souptick Joarder <jrdr.linux@...il.com>
To: "Aneesh Kumar K.V" <aneesh.kumar@...ux.ibm.com>
Cc: Linux-MM <linux-mm@...ck.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Wei Xu <weixugc@...gle.com>, Huang Ying <ying.huang@...el.com>,
Yang Shi <shy828301@...il.com>,
Davidlohr Bueso <dave@...olabs.net>,
Tim C Chen <tim.c.chen@...el.com>,
Michal Hocko <mhocko@...nel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Hesham Almatary <hesham.almatary@...wei.com>,
Dave Hansen <dave.hansen@...el.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Alistair Popple <apopple@...dia.com>,
Dan Williams <dan.j.williams@...el.com>,
Jagdish Gediya <jvgediya@...ux.ibm.com>
Subject: Re: [PATCH v7 11/12] mm/demotion: Add documentation for memory tiering
On Wed, Jun 22, 2022 at 2:04 PM Aneesh Kumar K.V
<aneesh.kumar@...ux.ibm.com> wrote:
>
> From: Jagdish Gediya <jvgediya@...ux.ibm.com>
>
> All N_MEMORY nodes are divided into 3 memoty tiers with tier ID value
s /memoty/ memory
> MEMORY_TIER_HBM_GPU, MEMORY_TIER_DRAM and MEMORY_TIER_PMEM. By default,
> all nodes are assigned to default memory tier.
I think adding the default memory tier name will be helpful.
>
> Demotion path for all N_MEMORY nodes is prepared based on the tier ID value
> of memory tiers.
>
> This patch adds documention for memory tiering introduction, its sysfs
> interfaces and how demotion is performed based on memory tiers.
>
> Suggested-by: Wei Xu <weixugc@...gle.com>
> Signed-off-by: Jagdish Gediya <jvgediya@...ux.ibm.com>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@...ux.ibm.com>
> ---
> Documentation/admin-guide/mm/index.rst | 1 +
> .../admin-guide/mm/memory-tiering.rst | 182 ++++++++++++++++++
> 2 files changed, 183 insertions(+)
> create mode 100644 Documentation/admin-guide/mm/memory-tiering.rst
>
> diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst
> index c21b5823f126..3f211cbca8c3 100644
> --- a/Documentation/admin-guide/mm/index.rst
> +++ b/Documentation/admin-guide/mm/index.rst
> @@ -32,6 +32,7 @@ the Linux memory management.
> idle_page_tracking
> ksm
> memory-hotplug
> + memory-tiering
> nommu-mmap
> numa_memory_policy
> numaperf
> diff --git a/Documentation/admin-guide/mm/memory-tiering.rst b/Documentation/admin-guide/mm/memory-tiering.rst
> new file mode 100644
> index 000000000000..142c36651f5d
> --- /dev/null
> +++ b/Documentation/admin-guide/mm/memory-tiering.rst
> @@ -0,0 +1,182 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +.. _admin_guide_memory_tiering:
> +
> +===========
> +Memory tiers
> +============
> +
> +This document describes explicit memory tiering support along with
> +demotion based on memory tiers.
> +
> +Introduction
> +============
> +
> +Many systems have multiple types of memory devices e.g. GPU, DRAM and
> +PMEM. The memory subsystem of these systems can be called a memory
> +tiering system because the performance of the different types of
> +memory is different. Memory tiers are defined based on the hardware
> +capabilities of memory nodes. Each memory tier is assigned a tier ID
> +value that determines the memory tier position in demotion order.
> +
> +The memory tier assignment of each node is independent of each
> +other. Moving a node from one tier to another tier doesn't affect
> +the tier assignment of any other node.
> +
> +Memory tiers are used to build the demotion targets for nodes. A node
> +can demote its pages to any node of any lower tiers.
> +
> +Memory tier rank
> +=================
> +
> +Memory nodes are divided into 3 types of memory tiers with tier ID
> +value as shown based on their hardware characteristics.
> +
> +
> +MEMORY_TIER_HBM_GPU
> +MEMORY_TIER_DRAM
> +MEMORY_TIER_PMEM
> +
> +Memory tiers initialization and (re)assignments
> +===============================================
> +
> +By default, all nodes are assigned to the memory tier with the default tier ID
> +DEFAULT_MEMORY_TIER which is 200 (MEMORY_TIER_DRAM). The memory tier of
> +the memory node can be either modified through sysfs or from the driver. On
> +hotplug, the memory tier with default tier ID is assigned to the memory node.
> +
> +
> +Sysfs interfaces
> +================
> +
> +Nodes belonging to specific tier can be read from,
> +/sys/devices/system/memtier/memtierN/nodelist (Read-Only)
> +
> +Where N is 0 - 2.
> +
> +Example 1:
> +For a system where Node 0 is CPU + DRAM nodes, Node 1 is HBM node,
> +node 2 is a PMEM node an ideal tier layout will be
> +
> +$ cat /sys/devices/system/memtier/memtier0/nodelist
> +1
> +$ cat /sys/devices/system/memtier/memtier1/nodelist
> +0
> +$ cat /sys/devices/system/memtier/memtier2/nodelist
> +2
> +
> +Example 2:
> +For a system where Node 0 & 1 are CPU + DRAM nodes, node 2 & 3 are PMEM
> +nodes.
> +
> +$ cat /sys/devices/system/memtier/memtier0/nodelist
> +cat: /sys/devices/system/memtier/memtier0/nodelist: No such file or
> +directory
> +$ cat /sys/devices/system/memtier/memtier1/nodelist
> +0-1
> +$ cat /sys/devices/system/memtier/memtier2/nodelist
> +2-3
> +
> +Default memory tier can be read from,
> +/sys/devices/system/memtier/default_tier (Read-Only)
> +
> +e.g.
> +$ cat /sys/devices/system/memtier/default_tier
> +memtier200
> +
> +Max memory tier ID supported can be read from,
> +/sys/devices/system/memtier/max_tier (Read-Only)
> +
> +e.g.
> +$ cat /sys/devices/system/memtier/max_tier
> +400
> +
> +Individual node's memory tier can be read of set using,
> +/sys/devices/system/node/nodeN/memtier (Read-Write)
> +
> +where N = node id
> +
> +When this interface is written, Node is moved from the old memory tier
> +to new memory tier and demotion targets for all N_MEMORY nodes are
> +built again.
> +
> +For example 1 mentioned above,
> +$ cat /sys/devices/system/node/node0/memtier
> +1
> +$ cat /sys/devices/system/node/node1/memtier
> +0
> +$ cat /sys/devices/system/node/node2/memtier
> +2
> +
> +Additional memory tiers can be created by writing a tier ID value to this file.
> +This results in a new memory tier creation and moving the specific NUMA node to
> +that memory tier.
> +
> +Demotion
> +========
> +
> +In a system with DRAM and persistent memory, once DRAM
> +fills up, reclaim will start and some of the DRAM contents will be
> +thrown out even if there is a space in persistent memory.
> +Consequently, allocations will, at some point, start falling over to the slower
> +persistent memory.
> +
> +That has two nasty properties. First, the newer allocations can end up in
> +the slower persistent memory. Second, reclaimed data in DRAM are just
> +discarded even if there are gobs of space in persistent memory that could
> +be used.
> +
> +Instead of a page being discarded during reclaim, it can be moved to
> +persistent memory. Allowing page migration during reclaim enables
> +these systems to migrate pages from fast(higher) tiers to slow(lower)
> +tiers when the fast(higher) tier is under pressure.
> +
> +
> +Enable/Disable demotion
> +-----------------------
> +
> +By default demotion is disabled, it can be enabled/disabled using
> +below sysfs interface,
> +
> +$ echo 0/1 or false/true > /sys/kernel/mm/numa/demotion_enabled
> +
> +preferred and allowed demotion nodes
> +------------------------------------
> +
> +Preferred nodes for a specific N_MEMORY node are the best nodes
> +from the next possible lower memory tier. Allowed nodes for any
> +node are all the nodes available in all possible lower memory
> +tiers.
> +
> +Example:
> +
> +For a system where Node 0 & 1 are CPU + DRAM nodes, node 2 & 3 are PMEM
> +nodes,
> +
> +node distances:
> +node 0 1 2 3
> + 0 10 20 30 40
> + 1 20 10 40 30
> + 2 30 40 10 40
> + 3 40 30 40 10
> +
> +memory_tiers[0] = <empty>
> +memory_tiers[1] = 0-1
> +memory_tiers[2] = 2-3
> +
> +node_demotion[0].preferred = 2
> +node_demotion[0].allowed = 2, 3
> +node_demotion[1].preferred = 3
> +node_demotion[1].allowed = 3, 2
> +node_demotion[2].preferred = <empty>
> +node_demotion[2].allowed = <empty>
> +node_demotion[3].preferred = <empty>
> +node_demotion[3].allowed = <empty>
> +
> +Memory allocation for demotion
> +------------------------------
> +
> +If a page needs to be demoted from any node, the kernel 1st tries
> +to allocate a new page from the node's preferred node and fallbacks to
> +node's allowed targets in allocation fallback order.
> +
> --
> 2.36.1
>
>
Powered by blists - more mailing lists