linux-kernel - Re: [PATCH v3 3/3] ARM: dts: lan966x: Add UDPHS support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f4f14941-6839-5691-b2d1-adb049118a4d@microchip.com>
Date:   Thu, 30 Jun 2022 09:31:00 +0000
From:   <Claudiu.Beznea@...rochip.com>
To:     <herve.codina@...tlin.com>, <gregkh@...uxfoundation.org>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <Nicolas.Ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
        <mturquette@...libre.com>, <sboyd@...nel.org>,
        <Horatiu.Vultur@...rochip.com>
CC:     <linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
        <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v3 3/3] ARM: dts: lan966x: Add UDPHS support

On 25.05.2022 10:10, Herve Codina wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Add UDPHS (the USB High Speed Device Port controller) support.
> 
> The both lan966x SOCs (LAN9662 and LAN9668) have the same UDPHS
> IP. This IP is also the same as the one present in the SAMA5D3
> SOC.
> 
> Signed-off-by: Herve Codina <herve.codina@...tlin.com>
> ---
>  arch/arm/boot/dts/lan966x.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
> index 7d2869648050..e086df741f99 100644
> --- a/arch/arm/boot/dts/lan966x.dtsi
> +++ b/arch/arm/boot/dts/lan966x.dtsi
> @@ -196,6 +196,17 @@ watchdog: watchdog@...90000 {
>                         status = "disabled";
>                 };
> 
> +               udc: usb@...08000 {
> +                       compatible = "microchip,lan9662-udc",
> +                                    "atmel,sama5d3-udc";
> +                       reg = <0x00200000 0x80000>,
> +                             <0xe0808000 0x400>;
> +                       interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
> +                       clock-names = "pclk", "hclk";
> +                       status = "disabled";
> +               };
> +

This doesn't apply clean on top of v5.19-rc1. Can you check and resend?

>                 can0: can@...1c000 {
>                         compatible = "bosch,m_can";
>                         reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
> --
> 2.35.3
>