[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220701104725.557314-2-peng.fan@oss.nxp.com>
Date: Fri, 1 Jul 2022 18:47:20 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: bjorn.andersson@...aro.org, mathieu.poirier@...aro.org,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org
Cc: linux-remoteproc@...r.kernel.org, linux-kernel@...r.kernel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Peng Fan <peng.fan@....com>,
Rob Herring <robh@...nel.org>
Subject: [PATCH V4 1/6] dt-bindings: remoteproc: imx_rproc: support i.MX8QXP
From: Peng Fan <peng.fan@....com>
Add i.MX8QXP compatible
Add a new property fsl,resource-id for SoC which supports SCFW.
This property is used to check whether remote process is under control
of Linux or not.
Add fsl,entry-address to specify the entry address which used by SCFW
to kick M4.
To i.MX8QM/QXP, when M4 is in the same hardware partition with Cortex-A
cores, need power up M4 through SCFW, then M4 could start. So introduce
power-domains property
Signed-off-by: Peng Fan <peng.fan@....com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../bindings/remoteproc/fsl,imx-rproc.yaml | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index 3a1f59ad79e2..70322e57b6ff 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -22,6 +22,7 @@ properties:
- fsl,imx8mn-cm7
- fsl,imx8mp-cm7
- fsl,imx8mq-cm4
+ - fsl,imx8qxp-cm4
- fsl,imx8ulp-cm33
- fsl,imx93-cm33
@@ -54,12 +55,26 @@ properties:
minItems: 1
maxItems: 32
+ power-domains:
+ maxItems: 8
+
fsl,auto-boot:
$ref: /schemas/types.yaml#/definitions/flag
description:
Indicate whether need to load the default firmware and start the remote
processor automatically.
+ fsl,entry-address:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Specify CPU entry address for SCU enabled processor.
+
+ fsl,resource-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ This property is to specify the resource id of the remote processor in SoC
+ which supports SCFW
+
required:
- compatible
--
2.25.1
Powered by blists - more mailing lists