[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5a33ac18-5232-979d-889b-0cf2c1fac923@foss.st.com>
Date: Fri, 1 Jul 2022 13:42:46 +0200
From: Alexandre TORGUE <alexandre.torgue@...s.st.com>
To: Fabrice Gasnier <fabrice.gasnier@...s.st.com>, <robh+dt@...nel.org>
CC: <amelie.delaunay@...s.st.com>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>
Subject: Re: [PATCH] ARM: dts: stm32: add missing usbh clock and fix clk order
on stm32mp15
Hi Fabrice
On 6/21/22 10:45, Fabrice Gasnier wrote:
> The USBH composed of EHCI and OHCI controllers needs the PHY clock to be
> initialized first, before enabling (gating) them. The reverse is also
> required when going to suspend.
> So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL
> gets enabled 1st upon controller init. Upon suspend/resume, this also makes
> the clock to be disabled/re-enabled in the correct order.
> This fixes some IRQ storm conditions seen when going to low-power, due to
> PHY PLL being disabled before all clocks are cleanly gated.
>
> Fixes: 949a0c0dec85 ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c")
> Fixes: db7be2cb87ae ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151")
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...s.st.com>
> ---
> arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index edc0a1641c7b..9e2226430802 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1473,7 +1473,7 @@ stmmac_axi_config_0: stmmac-axi-config {
> usbh_ohci: usb@...0c000 {
> compatible = "generic-ohci";
> reg = <0x5800c000 0x1000>;
> - clocks = <&rcc USBH>, <&usbphyc>;
> + clocks = <&usbphyc>, <&rcc USBH>;
> resets = <&rcc USBH_R>;
> interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> @@ -1482,7 +1482,7 @@ usbh_ohci: usb@...0c000 {
> usbh_ehci: usb@...0d000 {
> compatible = "generic-ehci";
> reg = <0x5800d000 0x1000>;
> - clocks = <&rcc USBH>;
> + clocks = <&usbphyc>, <&rcc USBH>;
> resets = <&rcc USBH_R>;
> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> companion = <&usbh_ohci>;
Applied in stm32-fixes.
Thanks
Alex
Powered by blists - more mailing lists