linux-kernel - Re: [PATCH v3 6/9] iio: adc: mcp3911: add support for interrupts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAHp75VeqAJK_jBmF5zb3NACS0JJvzWQ8HAgpDFcXPAQiozp94g@mail.gmail.com>
Date:   Mon, 4 Jul 2022 23:57:37 +0200
From:   Andy Shevchenko <andy.shevchenko@...il.com>
To:     Marcus Folkesson <marcus.folkesson@...il.com>
Cc:     Kent Gustavsson <kent@...oris.se>,
        Jonathan Cameron <jic23@...nel.org>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-iio <linux-iio@...r.kernel.org>,
        devicetree <devicetree@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 6/9] iio: adc: mcp3911: add support for interrupts

On Mon, Jul 4, 2022 at 7:21 PM Marcus Folkesson
<marcus.folkesson@...il.com> wrote:
>
> Make it possible to read values upon interrupts.
> Configure Data Ready Signal Output Pin to either HiZ or push-pull and
> use it as interrupt source.

...

> +               /*
> +                * The device generates interrupts as long as it is powered up.
> +                * Some platforms might not allow the option to power it down so
> +                * don't enable the interrupt to avoid extra load on the system

Missed period.

> +                */

-- 
With Best Regards,
Andy Shevchenko