[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e88c6b69-1e06-429a-5784-a8c66d13e260@microchip.com>
Date: Mon, 4 Jul 2022 05:39:21 +0000
From: <Claudiu.Beznea@...rochip.com>
To: <herve.codina@...tlin.com>
CC: <gregkh@...uxfoundation.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <Nicolas.Ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <Horatiu.Vultur@...rochip.com>,
<linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v4 3/3] ARM: dts: lan966x: Add UDPHS support
Hi, Herve,
On 01.07.2022 17:03, Herve Codina wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Hi Claudiu,>
> On Fri, 1 Jul 2022 10:56:46 +0000
> <Claudiu.Beznea@...rochip.com> wrote:
>
>> On 01.07.2022 10:09, Herve Codina wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> Add UDPHS (the USB High Speed Device Port controller) support.
>>>
>>> The both lan966x SOCs (LAN9662 and LAN9668) have the same UDPHS
>>> IP. This IP is also the same as the one present in the SAMA5D3
>>> SOC.
>>>
>>> Signed-off-by: Herve Codina <herve.codina@...tlin.com>
>>> ---
>>> arch/arm/boot/dts/lan966x.dtsi | 11 +++++++++++
>>> 1 file changed, 11 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
>>> index 3cb02fffe716..c98e7075c2b4 100644
>>> --- a/arch/arm/boot/dts/lan966x.dtsi
>>> +++ b/arch/arm/boot/dts/lan966x.dtsi
>>> @@ -458,6 +458,17 @@ cpu_ctrl: syscon@...c0000 {
>>> reg = <0xe00c0000 0x350>;
>>> };
>>>
>>> + udc: usb@...08000 {
>>> + compatible = "microchip,lan9662-udc",
>>> + "atmel,sama5d3-udc";
>>> + reg = <0x00200000 0x80000>,
>>> + <0xe0808000 0x400>;
>>> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
>>> + clock-names = "pclk", "hclk";
>>> + status = "disabled";
>>> + };
>>> +
>>
>> I have these compilation warnings:
>>
>> DTC arch/arm/boot/dts/lan966x-pcb8291.dtb
>> arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
>> /soc/usb@...08000: simple-bus unit address format error, expected "200000"
>> DTC arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
>> arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
>> /soc/usb@...08000: simple-bus unit address format error, expected "200000"
>> DTC arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dtb
>> arch/arm/boot/dts/lan966x.dtsi:461.21-470.5: Warning (simple_bus_reg):
>> /soc/usb@...08000: simple-bus unit address format error, expected "200000"
>
> I am a bit confused but these warnings do not appear on my side (patches
> based on v5.19-rc1).
> What is the exact command that leads to these warning ?
Have you tried with CONFIG_SOC_LAN966 enabled?
Thank you,
Claudiu Beznea
>
> Thanks,
> Hervé
>
> --
> Hervé Codina, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
Powered by blists - more mailing lists