[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1656894074-15751-7-git-send-email-hayashi.kunihiko@socionext.com>
Date: Mon, 4 Jul 2022 09:21:11 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Masami Hiramatsu <mhiramat@...nel.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH 6/9] arm64: dts: uniphier: Add ahci controller and glue layer nodes for PXs3
Add ahci controller and glue layer nodes including reset and phy.
This supports for PXs3 and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
---
.../boot/dts/socionext/uniphier-pxs3-ref.dts | 8 ++
.../boot/dts/socionext/uniphier-pxs3.dtsi | 80 +++++++++++++++++++
2 files changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index 506c7b9ff50d..1ced6190ab2b 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -137,6 +137,14 @@ nand@0 {
};
};
+&ahci0 {
+ status = "okay";
+};
+
+&ahci1 {
+ status = "okay";
+};
+
&pinctrl_ether_rgmii {
tx {
pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1",
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 7304dee2e504..f49a8db3e918 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -596,6 +596,86 @@ mdio1: mdio {
};
};
+ ahci0: ahci@...00000 {
+ compatible = "socionext,uniphier-pxs3-ahci",
+ "generic-ahci";
+ status = "disabled";
+ reg = <0x65600000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_clk 28>;
+ resets = <&sys_rst 28>, <&ahci0_rst 0>;
+ ports-implemented = <1>;
+ phys = <&ahci0_phy>;
+ };
+
+ ahci-glue@...00000 {
+ compatible = "socionext,uniphier-pxs3-ahci-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65700000 0x100>;
+
+ ahci0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-ahci-reset";
+ reg = <0x0 0x4>;
+ clock-names = "link";
+ clocks = <&sys_clk 28>;
+ reset-names = "link";
+ resets = <&sys_rst 28>;
+ #reset-cells = <1>;
+ };
+
+ ahci0_phy: phy@10 {
+ compatible = "socionext,uniphier-pxs3-ahci-phy";
+ reg = <0x10 0x10>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 28>, <&sys_clk 30>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 28>, <&sys_rst 30>;
+ #phy-cells = <0>;
+ };
+ };
+
+ ahci1: ahci@...00000 {
+ compatible = "socionext,uniphier-pxs3-ahci",
+ "generic-ahci";
+ status = "disabled";
+ reg = <0x65800000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_clk 29>;
+ resets = <&sys_rst 29>, <&ahci1_rst 0>;
+ ports-implemented = <1>;
+ phys = <&ahci1_phy>;
+ };
+
+ ahci-glue@...00000 {
+ compatible = "socionext,uniphier-pxs3-ahci-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65900000 0x100>;
+
+ ahci1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-ahci-reset";
+ reg = <0x0 0x4>;
+ clock-names = "link";
+ clocks = <&sys_clk 29>;
+ reset-names = "link";
+ resets = <&sys_rst 29>;
+ #reset-cells = <1>;
+ };
+
+ ahci1_phy: phy@10 {
+ compatible = "socionext,uniphier-pxs3-ahci-phy";
+ reg = <0x10 0x10>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 29>, <&sys_clk 30>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 29>, <&sys_rst 30>;
+ #phy-cells = <0>;
+ };
+ };
+
usb0: usb@...00000 {
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
status = "disabled";
--
2.25.1
Powered by blists - more mailing lists