linux-kernel - [PATCH 5.18 020/102] dm raid: fix accesses beyond end of raid member array

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220705115618.991988078@linuxfoundation.org>
Date:   Tue,  5 Jul 2022 13:57:46 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Heinz Mauelshagen <heinzm@...hat.com>,
        Mike Snitzer <snitzer@...nel.org>
Subject: [PATCH 5.18 020/102] dm raid: fix accesses beyond end of raid member array

From: Heinz Mauelshagen <heinzm@...hat.com>

commit 332bd0778775d0cf105c4b9e03e460b590749916 upstream.

On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.

In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)

When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.

Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().

The out-of-bounds memory accesses was discovered using KASAN.

This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled).

Cc: stable@...r.kernel.org
Signed-off-by: Heinz Mauelshagen <heinzm@...hat.com>
Signed-off-by: Mike Snitzer <snitzer@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/md/dm-raid.c |   34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -1001,12 +1001,13 @@ static int validate_region_size(struct r
 static int validate_raid_redundancy(struct raid_set *rs)
 {
 	unsigned int i, rebuild_cnt = 0;
-	unsigned int rebuilds_per_group = 0, copies;
+	unsigned int rebuilds_per_group = 0, copies, raid_disks;
 	unsigned int group_size, last_group_start;
 
-	for (i = 0; i < rs->md.raid_disks; i++)
-		if (!test_bit(In_sync, &rs->dev[i].rdev.flags) ||
-		    !rs->dev[i].rdev.sb_page)
+	for (i = 0; i < rs->raid_disks; i++)
+		if (!test_bit(FirstUse, &rs->dev[i].rdev.flags) &&
+		    ((!test_bit(In_sync, &rs->dev[i].rdev.flags) ||
+		      !rs->dev[i].rdev.sb_page)))
 			rebuild_cnt++;
 
 	switch (rs->md.level) {
@@ -1046,8 +1047,9 @@ static int validate_raid_redundancy(stru
 		 *	    A	 A    B	   B	C
 		 *	    C	 D    D	   E	E
 		 */
+		raid_disks = min(rs->raid_disks, rs->md.raid_disks);
 		if (__is_raid10_near(rs->md.new_layout)) {
-			for (i = 0; i < rs->md.raid_disks; i++) {
+			for (i = 0; i < raid_disks; i++) {
 				if (!(i % copies))
 					rebuilds_per_group = 0;
 				if ((!rs->dev[i].rdev.sb_page ||
@@ -1070,10 +1072,10 @@ static int validate_raid_redundancy(stru
 		 * results in the need to treat the last (potentially larger)
 		 * set differently.
 		 */
-		group_size = (rs->md.raid_disks / copies);
-		last_group_start = (rs->md.raid_disks / group_size) - 1;
+		group_size = (raid_disks / copies);
+		last_group_start = (raid_disks / group_size) - 1;
 		last_group_start *= group_size;
-		for (i = 0; i < rs->md.raid_disks; i++) {
+		for (i = 0; i < raid_disks; i++) {
 			if (!(i % copies) && !(i > last_group_start))
 				rebuilds_per_group = 0;
 			if ((!rs->dev[i].rdev.sb_page ||
@@ -1588,7 +1590,7 @@ static sector_t __rdev_sectors(struct ra
 {
 	int i;
 
-	for (i = 0; i < rs->md.raid_disks; i++) {
+	for (i = 0; i < rs->raid_disks; i++) {
 		struct md_rdev *rdev = &rs->dev[i].rdev;
 
 		if (!test_bit(Journal, &rdev->flags) &&
@@ -3771,13 +3773,13 @@ static int raid_iterate_devices(struct d
 	unsigned int i;
 	int r = 0;
 
-	for (i = 0; !r && i < rs->md.raid_disks; i++)
-		if (rs->dev[i].data_dev)
-			r = fn(ti,
-				 rs->dev[i].data_dev,
-				 0, /* No offset on data devs */
-				 rs->md.dev_sectors,
-				 data);
+	for (i = 0; !r && i < rs->raid_disks; i++) {
+		if (rs->dev[i].data_dev) {
+			r = fn(ti, rs->dev[i].data_dev,
+			       0, /* No offset on data devs */
+			       rs->md.dev_sectors, data);
+		}
+	}
 
 	return r;
 }