| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220705162142.17558-1-Ryan.Wanner@microchip.com>
Date: Tue, 5 Jul 2022 09:21:42 -0700
From: <Ryan.Wanner@...rochip.com>
To: <Claudiu.Beznea@...rochip.com>, <nicolas.ferre@...rochip.com>,
<alexandre.berna@...rochip.com>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Ryan Wanner <Ryan.Wanner@...rochip.com>
Subject: [PATCH] dt-binding: sound: Convert atmel pdmic to json-schema
From: Ryan Wanner <Ryan.Wanner@...rochip.com>
Convert Atmel PDMIC devicetree binding to json-schema.
Change file naming to match json-schema naming.
Signed-off-by: Ryan Wanner <Ryan.Wanner@...rochip.com>
---
.../bindings/sound/atmel,sama5d2-pdmic.yaml | 104 ++++++++++++++++++
.../devicetree/bindings/sound/atmel-pdmic.txt | 55 ---------
2 files changed, 104 insertions(+), 55 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/atmel-pdmic.txt
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
new file mode 100644
index 000000000000..cb34c0fc4fc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-pdmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel PDMIC driver under ALSA SoC architecture
+
+maintainers:
+ - Claudiu Beznea <claudiu.beznea@...rochip.com>
+
+description:
+ Atmel Pulse Density Modulation Interface Controller
+ (PDMIC) peripheral is a mono PDM decoder module
+ that decodes an incoming PDM sample stream.
+
+properties:
+ compatible:
+ items:
+ - const: atmel,sama5d2-pdmic
+
+ reg:
+ description: Should contain PDMIC registers location and length.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ Must contain an entry for each required entry in clock-names.
+ Please refer to clock-bindings.txt.
+
+ items:
+ - description: peripheral clock.
+ - description: generated clock.
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: gclk
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx
+
+ atmel,mic-min-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The minimal frequency that the microphone supports.
+
+ atmel,mic-max-freq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The maximal frequency that the microphone supports.
+
+ atmel,model:
+ description: The user-visible name of this sound card.
+ $ref: /schemas/types.yaml#/definitions/string
+ default: PDMIC
+
+ atmel,mic-offset:
+ $ref: /schemas/types.yaml#/definitions/int32
+ description: The offset that should be added.
+ default: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+ - clock-names
+ - clocks
+ - atmel,mic-min-freq
+ - atmel,mic-max-freq
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pdmic: sound@...18000 {
+ compatible = "atmel,sama5d2-pdmic";
+ reg = <0xf8018000 0x124>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(50))>;
+ dma-names = "rx";
+ clocks = <&pdmic_clk>, <&pdmic_gclk>;
+ clock-names = "pclk", "gclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdmic_default>;
+ atmel,model = "PDMIC@...a5d2_xplained";
+ atmel,mic-min-freq = <1000000>;
+ atmel,mic-max-freq = <3246000>;
+ atmel,mic-offset = <0x0>;
+ };
diff --git a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt b/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
deleted file mode 100644
index e0875f17c229..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Atmel PDMIC driver under ALSA SoC architecture
-
-Required properties:
-- compatible
- Should be "atmel,sama5d2-pdmic".
-- reg
- Should contain PDMIC registers location and length.
-- interrupts
- Should contain the IRQ line for the PDMIC.
-- dmas
- One DMA specifiers as described in atmel-dma.txt and dma.txt files.
-- dma-names
- Must be "rx".
-- clock-names
- Required elements:
- - "pclk" peripheral clock
- - "gclk" generated clock
-- clocks
- Must contain an entry for each required entry in clock-names.
- Please refer to clock-bindings.txt.
-- atmel,mic-min-freq
- The minimal frequency that the micphone supports.
-- atmel,mic-max-freq
- The maximal frequency that the micphone supports.
-
-Optional properties:
-- pinctrl-names, pinctrl-0
- Please refer to pinctrl-bindings.txt.
-- atmel,model
- The user-visible name of this sound card.
- The default value is "PDMIC".
-- atmel,mic-offset
- The offset that should be added.
- The range is from -32768 to 32767.
- The default value is 0.
-
-Example:
- pdmic@...18000 {
- compatible = "atmel,sama5d2-pdmic";
- reg = <0xf8018000 0x124>;
- interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
- | AT91_XDMAC_DT_PERID(50))>;
- dma-names = "rx";
- clocks = <&pdmic_clk>, <&pdmic_gclk>;
- clock-names = "pclk", "gclk";
-
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pdmic_default>;
- atmel,model = "PDMIC @ sama5d2_xplained";
- atmel,mic-min-freq = <1000000>;
- atmel,mic-max-freq = <3246000>;
- atmel,mic-offset = <0x0>;
- };
--
2.34.1
Powered by blists - more mailing lists