[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1657038556-2231-2-git-send-email-quic_khsieh@quicinc.com>
Date: Tue, 5 Jul 2022 09:29:14 -0700
From: Kuogee Hsieh <quic_khsieh@...cinc.com>
To: <dri-devel@...ts.freedesktop.org>, <robdclark@...il.com>,
<sean@...rly.run>, <swboyd@...omium.org>, <dianders@...omium.org>,
<vkoul@...nel.org>, <daniel@...ll.ch>, <airlied@...ux.ie>,
<agross@...nel.org>, <dmitry.baryshkov@...aro.org>,
<bjorn.andersson@...aro.org>
CC: Kuogee Hsieh <quic_khsieh@...cinc.com>,
<quic_abhinavk@...cinc.com>, <quic_aravindh@...cinc.com>,
<quic_sbillaka@...cinc.com>, <freedreno@...ts.freedesktop.org>,
<linux-arm-msm@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v16 1/3] phy: qcom-edp: add regulator_set_load to edp phy
This patch add regulator_set_load() before enable regulator at
eDP phy driver.
Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
drivers/phy/qualcomm/phy-qcom-edp.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index cacd32f..7e357078 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -639,6 +639,18 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = regulator_set_load(edp->supplies[0].consumer, 21800); /* 1.2 V vdda-phy */
+ if (ret) {
+ dev_err(dev, "failed to set load at %s\n", edp->supplies[0].supply);
+ return ret;
+ }
+
+ ret = regulator_set_load(edp->supplies[1].consumer, 36000); /* 0.9 V vdda-pll */
+ if (ret) {
+ dev_err(dev, "failed to set load at %s\n", edp->supplies[1].supply);
+ return ret;
+ }
+
ret = qcom_edp_clks_register(edp, pdev->dev.of_node);
if (ret)
return ret;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists