| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJZ5v0jOpJhdLEdOr5EY5v_e2AXcn_1pt71F3t_KqCZe=ntd=Q@mail.gmail.com>
Date: Tue, 5 Jul 2022 20:55:57 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Junwen Wu <wudaemon@....com>
Cc: "Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
"Zhang, Rui" <rui.zhang@...el.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux PM <linux-pm@...r.kernel.org>
Subject: Re: [PATCH v2] thermal/core: Make trans_table tunnable to avoid some
needless zero output
Sorry for the delay.
On Sat, May 14, 2022 at 4:20 PM Junwen Wu <wudaemon@....com> wrote:
>
> Very high cooling device max state value make trans_table node
> prompt File too large. We introduce show_state node, tunnable
> by user,thus trans_table only show show_state'th trans count to
> the max trans count, in this way trans_table_show's buffer is
> always less than PAGE_SIZE and shows the important changes.
This changelog is rather hard to understand.
As far as the code changes go, you cannot add new sysfs attributes
arbitrarily without documenting them.
Also, is the proposed change compatible with all existing user space
that may be using the sysfs modified by this change?
> Signed-off-by: Junwen Wu <wudaemon@....com>
> ---
> drivers/thermal/thermal_sysfs.c | 111 +++++++++++++++++++++++++-------
> 1 file changed, 86 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
> index f154bada2906..bb8627aa49b7 100644
> --- a/drivers/thermal/thermal_sysfs.c
> +++ b/drivers/thermal/thermal_sysfs.c
> @@ -656,6 +656,7 @@ struct cooling_dev_stats {
> spinlock_t lock;
> unsigned int total_trans;
> unsigned long state;
> + unsigned long show_state;
> unsigned long max_states;
> ktime_t last_time;
> ktime_t *time_in_state;
> @@ -752,38 +753,93 @@ reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
> return count;
> }
>
> -static ssize_t trans_table_show(struct device *dev,
> - struct device_attribute *attr, char *buf)
> +static ssize_t
> +show_state_store(struct device *dev, struct device_attribute *attr, const char *buf,
> + size_t count)
> {
> struct thermal_cooling_device *cdev = to_cooling_device(dev);
> struct cooling_dev_stats *stats = cdev->stats;
> - ssize_t len = 0;
> - int i, j;
> + unsigned long state;
> + ssize_t ret;
>
> - len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n");
> - len += snprintf(buf + len, PAGE_SIZE - len, " : ");
> - for (i = 0; i < stats->max_states; i++) {
> - if (len >= PAGE_SIZE)
> - break;
> - len += snprintf(buf + len, PAGE_SIZE - len, "state%2u ", i);
> - }
> - if (len >= PAGE_SIZE)
> - return PAGE_SIZE;
> + spin_lock(&stats->lock);
> +
> + ret = kstrtoul(buf, 10, &state);
> + if (ret || (state > stats->max_states))
> + goto unlock;
>
> - len += snprintf(buf + len, PAGE_SIZE - len, "\n");
> + stats->show_state = state;
> +unlock:
> + spin_unlock(&stats->lock);
>
> - for (i = 0; i < stats->max_states; i++) {
> - if (len >= PAGE_SIZE)
> - break;
> + return count;
> +}
> +
> +static ssize_t
> +show_state_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct thermal_cooling_device *cdev = to_cooling_device(dev);
> + struct cooling_dev_stats *stats = cdev->stats;
> +
> + return sprintf(buf, "%lu\n", stats->show_state);
> +}
>
> - len += snprintf(buf + len, PAGE_SIZE - len, "state%2u:", i);
> +/* find the kth largest in nums array*/
> +static int find_show_state(int *nums, int numsSize, int k, unsigned int *max_value)
> +{
> + int i, l, r, mid, cnt = 0, min = INT_MAX, max = 0;
>
> - for (j = 0; j < stats->max_states; j++) {
> - if (len >= PAGE_SIZE)
> - break;
> - len += snprintf(buf + len, PAGE_SIZE - len, "%8u ",
> - stats->trans_table[i * stats->max_states + j]);
> + for (i = 0; i < numsSize; i++) {
> + min = nums[i] < min ? nums[i] : min;
> + max = nums[i] > max ? nums[i] : max;
> + }
> + l = min;
> + r = max;
> + while (l < r) {
> + mid = r - (r - l) / 2;
> + for (i = 0; i < numsSize; i++) {
> + if (nums[i] >= mid)
> + cnt++;
> + }
> + if (cnt < k) {
> + r = mid - 1;
> + cnt = 0;
> + } else {
> + l = mid;
> + cnt = 0;
> }
> + }
> +
> + *max_value = max;
> +
> + return l;
> +}
> +
> +
> +
> +static ssize_t trans_table_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct thermal_cooling_device *cdev = to_cooling_device(dev);
> + struct cooling_dev_stats *stats = cdev->stats;
> + unsigned int show_state_value = 0;
> + unsigned int max_state_value = 0;
> + ssize_t len = 0;
> + int i, j;
> +
> + len += snprintf(buf + len, PAGE_SIZE - len, " From : Index_change\n");
> + for (i = 0; i < stats->max_states; i++) {
> + show_state_value = find_show_state(&stats->trans_table[i * stats->max_states],
> + stats->max_states, stats->show_state, &max_state_value);
> + if (max_state_value)
> + len += snprintf(buf + len, PAGE_SIZE - len, "state%2u:", i);
> + else
> + continue;
> + for (j = 0; j < stats->max_states; j++)
> + if (stats->trans_table[i * stats->max_states + j] && (show_state_value <=
> + stats->trans_table[i * stats->max_states + j]))
> + len += snprintf(buf + len, PAGE_SIZE - len, " ->%u(%u)", j,
> + stats->trans_table[i * stats->max_states + j]);
> if (len >= PAGE_SIZE)
> break;
> len += snprintf(buf + len, PAGE_SIZE - len, "\n");
> @@ -793,6 +849,7 @@ static ssize_t trans_table_show(struct device *dev,
> pr_warn_once("Thermal transition table exceeds PAGE_SIZE. Disabling\n");
> return -EFBIG;
> }
> +
> return len;
> }
>
> @@ -800,12 +857,14 @@ static DEVICE_ATTR_RO(total_trans);
> static DEVICE_ATTR_RO(time_in_state_ms);
> static DEVICE_ATTR_WO(reset);
> static DEVICE_ATTR_RO(trans_table);
> +static DEVICE_ATTR_RW(show_state);
>
> static struct attribute *cooling_device_stats_attrs[] = {
> &dev_attr_total_trans.attr,
> &dev_attr_time_in_state_ms.attr,
> &dev_attr_reset.attr,
> &dev_attr_trans_table.attr,
> + &dev_attr_show_state.attr,
> NULL
> };
>
> @@ -829,7 +888,7 @@ static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
> var += sizeof(*stats->time_in_state) * states;
> var += sizeof(*stats->trans_table) * states * states;
>
> - stats = kzalloc(var, GFP_KERNEL);
> + stats = kvzalloc(var, GFP_KERNEL);
> if (!stats)
> return;
>
> @@ -838,6 +897,8 @@ static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
> cdev->stats = stats;
> stats->last_time = ktime_get();
> stats->max_states = states;
> + /* default set show_state = max_states/2 */
> + stats->show_state = states / 2;
>
> spin_lock_init(&stats->lock);
>
> @@ -848,7 +909,7 @@ static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
>
> static void cooling_device_stats_destroy(struct thermal_cooling_device *cdev)
> {
> - kfree(cdev->stats);
> + kvfree(cdev->stats);
> cdev->stats = NULL;
> }
>
> --
> 2.25.1
>
Powered by blists - more mailing lists