| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e3ac8795-c6c5-35fb-c133-877f6b78ffb3@linaro.org>
Date: Tue, 5 Jul 2022 22:11:11 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Vinod Polimera <quic_vpolimer@...cinc.com>,
dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, robdclark@...il.com,
dianders@...omium.org, swboyd@...omium.org,
quic_kalyant@...cinc.com, quic_khsieh@...cinc.com,
quic_vproddut@...cinc.com, bjorn.andersson@...aro.org,
quic_aravindh@...cinc.com, quic_abhinavk@...cinc.com,
quic_sbillaka@...cinc.com
Subject: Re: [PATCH v4 7/7] drm/msm/disp/dpu1: add PSR support for eDP
interface in dpu driver
On 05/07/2022 20:00, Vinod Polimera wrote:
> Enable PSR on eDP interface using drm self-refresh librabry.
> This patch uses a trigger from self-refresh library to enter/exit
> into PSR, when there are no updates from framework.
>
> Signed-off-by: Kalyan Thota <quic_kalyant@...cinc.com>
> Signed-off-by: Vinod Polimera <quic_vpolimer@...cinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 ++++++++++++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 19 ++++++++++++++++++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +-
> 3 files changed, 31 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index f91e3d1..e63e363 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -18,6 +18,7 @@
> #include <drm/drm_probe_helper.h>
> #include <drm/drm_rect.h>
> #include <drm/drm_vblank.h>
> +#include <drm/drm_self_refresh_helper.h>
>
> #include "dpu_kms.h"
> #include "dpu_hw_lm.h"
> @@ -961,6 +962,9 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
>
> DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
>
> + if (old_crtc_state->self_refresh_active)
> + return;
> +
> /* Disable/save vblank irq handling */
> drm_crtc_vblank_off(crtc);
>
> @@ -1019,7 +1023,9 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
> struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> struct drm_encoder *encoder;
> bool request_bandwidth = false;
> + struct drm_crtc_state *old_crtc_state;
>
> + old_crtc_state = drm_atomic_get_old_crtc_state(state, crtc);
What for?
> pm_runtime_get_sync(crtc->dev->dev);
>
> DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
> @@ -1521,7 +1527,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
> {
> struct drm_crtc *crtc = NULL;
> struct dpu_crtc *dpu_crtc = NULL;
> - int i;
> + int i, ret;
>
> dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
> if (!dpu_crtc)
> @@ -1558,6 +1564,11 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
> /* initialize event handling */
> spin_lock_init(&dpu_crtc->event_lock);
>
> + ret = drm_self_refresh_helper_init(crtc);
> + if (ret)
> + DPU_ERROR("Failed to initialize %s with self-refresh helpers %d\n",
> + crtc->name, ret);
Return an error?
> +
> DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
> return crtc;
> }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index f01a976..e2a74ba 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -225,6 +225,11 @@ bool dpu_encoder_is_widebus_enabled(const struct drm_encoder *drm_enc)
> return dpu_enc->wide_bus_en;
> }
>
> +static inline bool is_self_refresh_active(const struct drm_crtc_state *state)
> +{
> + return (state && state->self_refresh_active);
> +}
Please inline this function. There is just one user.
> +
> static void _dpu_encoder_setup_dither(struct dpu_hw_pingpong *hw_pp, unsigned bpc)
> {
> struct dpu_hw_dither_cfg dither_cfg = { 0 };
> @@ -592,7 +597,7 @@ static int dpu_encoder_virt_atomic_check(
> if (drm_atomic_crtc_needs_modeset(crtc_state)) {
> dpu_rm_release(global_state, drm_enc);
>
> - if (!crtc_state->active_changed || crtc_state->active)
> + if (!crtc_state->active_changed || crtc_state->enable)
This warrants a separate commit with Fixes tag.
> ret = dpu_rm_reserve(&dpu_kms->rm, global_state,
> drm_enc, crtc_state, topology);
> }
> @@ -1171,11 +1176,23 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
> struct drm_atomic_state *state)
> {
> struct dpu_encoder_virt *dpu_enc = NULL;
> + struct drm_crtc *crtc;
> + struct drm_crtc_state *old_state;
> int i = 0;
>
> dpu_enc = to_dpu_encoder_virt(drm_enc);
> DPU_DEBUG_ENC(dpu_enc, "\n");
>
> + crtc = drm_enc->crtc;
> + old_state = drm_atomic_get_old_crtc_state(state, crtc);
> +
> + /*
> + * The encoder disabled already occurred when self refresh mode
The encoder is already disabled if self ...
> + * was set earlier, in the old_state for the corresponding crtc.
> + */
> + if (is_self_refresh_active(old_state))
> + return;
> +
> mutex_lock(&dpu_enc->enc_lock);
> dpu_enc->enabled = false;
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index bce4764..cc0a674 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -507,7 +507,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
> return;
> }
>
> - if (!crtc->state->active) {
> + if (!drm_atomic_crtc_effectively_active(crtc->state)) {
> DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
> return;
> }
--
With best wishes
Dmitry
Powered by blists - more mailing lists