[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220706225321.26215-1-ansuelsmth@gmail.com>
Date: Thu, 7 Jul 2022 00:53:17 +0200
From: Christian Marangi <ansuelsmth@...il.com>
To: Bjorn Andersson <bjorn.andersson@...aro.org>,
Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Christian Marangi <ansuelsmth@...il.com>
Subject: [PATCH v2 0/4] clk: qcom: Drop use of pxo/cxo_board for rpm devices
Trying to convert every driver used by ipq806x to parent_data api, I notice
RPM was still using pxo_board clk.
pxo and pxo_board are the same clock and are defined just to handle old
clock definition. It was discovered that rpm is the last driver using
pxo_board instead of pxo.
While updating the rpm driver I notice the documentation was also wrong,
so this series also fix that.
v2:
- Add review tag to DTS patch
- Drop clock-output-names patch
- Use pxo/cxo_board clock names
- Remove if nesting from Documentation
- Use min/maxItems in Documentation to describe clocks
Christian Marangi (4):
dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
ARM: DTS: qcom: add rpmcc missing clocks for apq/ipq8064 and msm8660
clk: qcom: clk-rpm: convert to parent_data API
clk: qcom: gcc-ipq806x: remove cc_register_board for pxo and cxo
.../devicetree/bindings/clock/qcom,rpmcc.yaml | 85 ++++++++++++++++++-
arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +
arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 +
arch/arm/boot/dts/qcom-msm8660.dtsi | 4 +-
drivers/clk/qcom/clk-rpm.c | 24 ++++--
drivers/clk/qcom/gcc-ipq806x.c | 8 --
6 files changed, 106 insertions(+), 19 deletions(-)
--
2.36.1
Powered by blists - more mailing lists