linux-kernel - [PATCH] arm64: dts: qcom: sc7280: Move wcd specific pin conf to common file

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1657102611-20067-1-git-send-email-quic_srivasam@quicinc.com>
Date:   Wed, 6 Jul 2022 15:46:51 +0530
From:   Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
To:     <agross@...nel.org>, <bjorn.andersson@...aro.org>,
        <robh+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_rohkumar@...cinc.com>, <srinivas.kandagatla@...aro.org>,
        <dianders@...omium.org>, <swboyd@...omium.org>,
        <judyhsiao@...omium.org>
CC:     Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
Subject: [PATCH] arm64: dts: qcom: sc7280: Move wcd specific pin conf to common file

Move wcd specific pin conf to common file to support various
herbronie variant boards and to avoid duplicate nodes in dts files.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
---
 .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi   | 71 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts  | 61 -------------------
 2 files changed, 71 insertions(+), 61 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 32a1e78..b04d796 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -5,6 +5,77 @@
  * Copyright (c) 2022, The Linux Foundation. All rights reserved.
  */
 
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to CRD board and is named it gets that name.
+ * - If a pin goes to CRD board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_clk_sleep {
+	drive-strength = <2>;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_clk_sleep {
+	drive-strength = <2>;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&lpass_rx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_rx_swr_clk_sleep {
+	bias-pull-down;
+};
+
+&lpass_rx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&lpass_rx_swr_data_sleep {
+	bias-pull-down;
+};
+
+&lpass_tx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_tx_swr_clk_sleep {
+	bias-pull-down;
+};
+
+&lpass_tx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
 &mi2s1_data0 {
 	drive-strength = <6>;
 	bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
index e9ca6c5..7881bbc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -155,67 +155,6 @@ ap_ts_pen_1v8: &i2c13 {
  * - If a pin is totally internal to Qcard then it gets Qcard name.
  * - If a pin is not hooked up on Qcard, it gets no name.
  */
-&lpass_dmic01_clk {
-	drive-strength = <8>;
-	bias-disable;
-};
-
-&lpass_dmic01_clk_sleep {
-	drive-strength = <2>;
-};
-
-&lpass_dmic01_data {
-	bias-pull-down;
-};
-
-&lpass_dmic23_clk {
-	drive-strength = <8>;
-	bias-disable;
-};
-
-&lpass_dmic23_clk_sleep {
-	drive-strength = <2>;
-};
-
-&lpass_dmic23_data {
-	bias-pull-down;
-};
-
-&lpass_rx_swr_clk {
-	drive-strength = <2>;
-	slew-rate = <1>;
-	bias-disable;
-};
-
-&lpass_rx_swr_clk_sleep {
-	bias-pull-down;
-};
-
-&lpass_rx_swr_data {
-	drive-strength = <2>;
-	slew-rate = <1>;
-	bias-bus-hold;
-};
-
-&lpass_rx_swr_data_sleep {
-	bias-pull-down;
-};
-
-&lpass_tx_swr_clk {
-	drive-strength = <2>;
-	slew-rate = <1>;
-	bias-disable;
-};
-
-&lpass_tx_swr_clk_sleep {
-	bias-pull-down;
-};
-
-&lpass_tx_swr_data {
-	drive-strength = <2>;
-	slew-rate = <1>;
-	bias-bus-hold;
-};
 
 &pm8350c_gpios {
 	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
-- 
2.7.4