linux-kernel - [PATCH v7 0/3] Add support for lan966x flexcom chip-select configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220706110619.71729-1-kavyasree.kotagiri@microchip.com>
Date:   Wed, 6 Jul 2022 09:06:16 -0200
From:   Kavyasree Kotagiri <kavyasree.kotagiri@...rochip.com>
To:     <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
        <claudiu.beznea@...rochip.com>, <UNGLinuxDriver@...rochip.com>
CC:     <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <Kavyasree.Kotagiri@...rochip.com>
Subject: [PATCH v7 0/3] Add support for lan966x flexcom chip-select configuration

This patch series converts atmel-flexcom bindings into json-schema format.
Adds support for lan966x flexcom chip-select configurations and its
DT bindings.

v6 -> v7:
 - Change filename to atmel,sama5d2-flexcom.yaml
 - Add #address-cells, #size-cells to flexcom node - Fixed warnings.

v5 -> v6:
 - Removed spi node from example as suggested by Rob and
   also pattern properties(spi dt-bindings conversion to yaml patch is under review).
   https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220629125804.137099-1-sergiu.moga@microchip.com/
   Once this is accepted, I will add back spi example through new patch.

v4 -> v5:
 - Fix indentations of DT example.
 - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then
   "reg" property as it is not required.

v3 -> v4:
 - Fix dtschema errors.
 - Add a condition to flexcom chip-selects configuration as chip-select
   lines are optional.

v2 -> v3:
 - changed IRQ flag in dt-bindings example.
 - added reg property specific to lan66x which is missed in v2.
 - used goto label for clk_disable in error cases.

v1 -> v2:
 - minor fix in title of dt-bindings.
 - Modified new dt properties usage in atmel,flexcom.yaml.
 - Used GENMASK and macros for maximum allowed values.
 - Use u32 values for flexcom chipselects instead of strings.
 - disable clock in case of errors.

Kavyasree Kotagiri (3):
  dt-bindings: mfd: Convert atmel-flexcom to json-schema
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for
    lan966x
  mfd: atmel-flexcom: Add support for lan966x flexcom chip-select
    configuration

 .../bindings/mfd/atmel,sama5d2-flexcom.yaml   | 137 ++++++++++++++++++
 .../devicetree/bindings/mfd/atmel-flexcom.txt |  63 --------
 drivers/mfd/atmel-flexcom.c                   |  94 +++++++++++-
 3 files changed, 230 insertions(+), 64 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt

-- 
2.25.1