[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMRc=MdHYfT3rMrYurEn1wXGZ=vgiorK8Awc+gOqCPUfjCFXvA@mail.gmail.com>
Date: Wed, 6 Jul 2022 14:23:20 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: "open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Michael Hennerich <michael.hennerich@...log.com>,
Linus Walleij <linus.walleij@...aro.org>
Subject: Re: [PATCH v1 1/3] gpio: adp5588: Switch from of headers to mod_devicetable.h
On Tue, Jun 28, 2022 at 9:39 PM Andy Shevchenko
<andriy.shevchenko@...ux.intel.com> wrote:
>
> There is nothing directly using of specific interfaces in this driver,
> so lets not include the headers.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> ---
> drivers/gpio/gpio-adp5588.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
> index e388e75103f4..51ed23ba4645 100644
> --- a/drivers/gpio/gpio-adp5588.c
> +++ b/drivers/gpio/gpio-adp5588.c
> @@ -6,7 +6,6 @@
> * Copyright 2009-2010 Analog Devices Inc.
> */
>
> -#include <linux/module.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> #include <linux/init.h>
> @@ -14,7 +13,8 @@
> #include <linux/gpio/driver.h>
> #include <linux/interrupt.h>
> #include <linux/irq.h>
> -#include <linux/of_device.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
>
> #include <linux/platform_data/adp5588.h>
>
> @@ -427,18 +427,16 @@ static const struct i2c_device_id adp5588_gpio_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id);
>
> -#ifdef CONFIG_OF
> static const struct of_device_id adp5588_gpio_of_id[] = {
> { .compatible = "adi," DRV_NAME, },
> {},
> };
> MODULE_DEVICE_TABLE(of, adp5588_gpio_of_id);
> -#endif
>
> static struct i2c_driver adp5588_gpio_driver = {
> .driver = {
> .name = DRV_NAME,
> - .of_match_table = of_match_ptr(adp5588_gpio_of_id),
> + .of_match_table = adp5588_gpio_of_id,
> },
> .probe_new = adp5588_gpio_probe,
> .remove = adp5588_gpio_remove,
> --
> 2.35.1
>
Applied all three, thanks!
Bart
Powered by blists - more mailing lists