[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220706125254.2474095-5-hsinyi@chromium.org>
Date: Wed, 6 Jul 2022 20:52:54 +0800
From: Hsin-Yi Wang <hsinyi@...omium.org>
To: Robert Foss <robert.foss@...aro.org>, Xin Ji <xji@...logixsemi.com>
Cc: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <narmstrong@...libre.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Sam Ravnborg <sam@...nborg.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Maxime Ripard <maxime@...no.tech>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/4] drm/bridge: anx7625: Add wait_hpd_asserted() callback
Move hpd polling check into wait_hpd_asserted() callback. For the cases
that aux transfer function wasn't used, do hpd polling check after pm
runtime resume, which will power on the bridge.
Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
Reviewed-by: Xin Ji <xji@...logixsemi.com>
---
v1->v2: fix indent.
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 33 ++++++++++++++++++-----
1 file changed, 27 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index aded20b9e25b1..d1f1d525aeb6d 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -1443,23 +1443,24 @@ static int anx7625_read_hpd_status_p0(struct anx7625_data *ctx)
return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, SYSTEM_STSTUS);
}
-static void anx7625_hpd_polling(struct anx7625_data *ctx)
+static int _anx7625_hpd_polling(struct anx7625_data *ctx,
+ unsigned long wait_us)
{
int ret, val;
struct device *dev = &ctx->client->dev;
/* Interrupt mode, no need poll HPD status, just return */
if (ctx->pdata.intp_irq)
- return;
+ return 0;
ret = readx_poll_timeout(anx7625_read_hpd_status_p0,
ctx, val,
((val & HPD_STATUS) || (val < 0)),
- 5000,
- 5000 * 100);
+ wait_us / 100,
+ wait_us);
if (ret) {
DRM_DEV_ERROR(dev, "no hpd.\n");
- return;
+ return ret;
}
DRM_DEV_DEBUG_DRIVER(dev, "system status: 0x%x. HPD raise up.\n", val);
@@ -1472,6 +1473,23 @@ static void anx7625_hpd_polling(struct anx7625_data *ctx)
if (!ctx->pdata.panel_bridge && ctx->bridge_attached)
drm_helper_hpd_irq_event(ctx->bridge.dev);
+
+ return 0;
+}
+
+static int anx7625_wait_hpd_asserted(struct drm_dp_aux *aux,
+ unsigned long wait_us)
+{
+ struct anx7625_data *ctx = container_of(aux, struct anx7625_data, aux);
+ struct device *dev = &ctx->client->dev;
+ int ret;
+
+ pm_runtime_get_sync(dev);
+ ret = _anx7625_hpd_polling(ctx, wait_us);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return ret;
}
static void anx7625_remove_edid(struct anx7625_data *ctx)
@@ -1741,6 +1759,7 @@ static struct edid *anx7625_get_edid(struct anx7625_data *ctx)
}
pm_runtime_get_sync(dev);
+ _anx7625_hpd_polling(ctx, 5000 * 100);
edid_num = sp_tx_edid_read(ctx, p_edid->edid_raw_data);
pm_runtime_put_sync(dev);
@@ -2378,6 +2397,7 @@ static void anx7625_bridge_atomic_enable(struct drm_bridge *bridge,
ctx->connector = connector;
pm_runtime_get_sync(dev);
+ _anx7625_hpd_polling(ctx, 5000 * 100);
anx7625_dp_start(ctx);
}
@@ -2497,7 +2517,6 @@ static int __maybe_unused anx7625_runtime_pm_resume(struct device *dev)
mutex_lock(&ctx->lock);
anx7625_power_on_init(ctx);
- anx7625_hpd_polling(ctx);
mutex_unlock(&ctx->lock);
@@ -2589,6 +2608,7 @@ static int anx7625_i2c_probe(struct i2c_client *client,
platform->aux.name = "anx7625-aux";
platform->aux.dev = dev;
platform->aux.transfer = anx7625_aux_transfer;
+ platform->aux.wait_hpd_asserted = anx7625_wait_hpd_asserted;
drm_dp_aux_init(&platform->aux);
if (anx7625_register_i2c_dummy_clients(platform, client) != 0) {
@@ -2617,6 +2637,7 @@ static int anx7625_i2c_probe(struct i2c_client *client,
if (!platform->pdata.low_power_mode) {
anx7625_disable_pd_protocol(platform);
pm_runtime_get_sync(dev);
+ _anx7625_hpd_polling(platform, 5000 * 100);
}
/* Add work function */
--
2.37.0.rc0.161.g10f37bed90-goog
Powered by blists - more mailing lists