| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 8 Jul 2022 09:33:42 +0530
From: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
CC: <agross@...nel.org>, <robh+dt@...nel.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <quic_rohkumar@...cinc.com>,
<srinivas.kandagatla@...aro.org>, <dianders@...omium.org>,
<swboyd@...omium.org>, <judyhsiao@...omium.org>
Subject: Re: [PATCH v14 00/12] Add soundcard support for sc7280 based
platforms.
On 7/7/2022 8:58 PM, Bjorn Andersson wrote:
Thanks for your time Bjorn!!!
> On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote:
>
>> This patch set is to add bolero digital macros, WCD and maxim codecs nodes
>> for audio on sc7280 based platforms.
>>
>> This patch set depends on:
>> [LPASS DTS: wcd related pinmux reorg]
>> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389
>> [Clock DTS: reset control changes]
>> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002
>> [Clock: External MCLK and reset control driver changes]
>> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267
> As far as I understand I can't apply this series until Taniya's clock
> patches has been picked up?
Okay. It seems Taniya's patches also in final stage of review.
>
>> [Clock DTS: lpasscc node disable and lpasscore node name changes]
>> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325
> You're the author of these 3 other patch sets, so why are you asking me
> to stitch them together, instead of just sending me one series that I
> can easily apply.
Here 3 dependent patch series are of Clock Teams patches. only patch
from me is [
LPASS DTS: wcd related pinmux reorg] patch. Which is not dependent on any
other patch and can be applied directly as it's reviewed by. Will take care next
time and will combine patches wherever is possible.
>
> If you want your patches merged, make it easy for the maintainer to
> merge them!
Sure. Will take care next time. For Now will keep it as it is, as it's
independent patch and only one.
>
> Regards,
> Bjorn
>
>> Changes Since V13:
>> -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches.
>> -- Remove redundant output high setting in wcd reset node.
>> -- Revert external mclk name.
>> -- Update dependency list.
>> -- Rebase as per latest kernel repository.
>> Changes Since V12:
>> -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches.
>> -- Update external mclk0 name and it's source node.
>> -- Move sound node to separate wcd specific dtsi file.
>> -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file.
>> -- Update dependency list.
>> Changes Since V11:
>> -- Remove output-low pinconf setting in wcd-reset-n-sleep node.
>> -- Update dependency list.
>> Changes Since V10:
>> -- Modify digital macro codecs pin control labels.
>> -- Updated dependency list.
>> Changes Since V9:
>> -- Move wcd codec and digital codec nodes to sc7280-qcard file.
>> -- Modify the reg property as per link number in sound node.
>> -- Fix the us-euro pin control usage in wcd codec node.
>> -- Move wcd pin control nodes to specific crd board files.
>> -- Sort max98360a codec node in alphabetical order.
>> -- Modify the commit messages.
>> Changes Since V8:
>> -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards.
>> -- Add corresponding dt nodes for herobrine crd boards.
>> -- Update dai-link node names as per dt-bindings in sound node.
>> -- Add reg property in sound node as per dt-bindings which was removed in previous series.
>> -- Fix typo errors.
>> -- Update wcd codec pin control properties in board specific files.
>> Changes Since V7:
>> -- Remove redundant interrupt names in soundwire node.
>> -- Fix typo errors.
>> -- Remove redundant reg property in sound node.
>> -- Rebased on top of latest kernel tip.
>> Changes Since V6:
>> -- Modify link-names and audio routing in a sound node.
>> -- Move amp_en pin control node to appropriate consumer patch.
>> -- Split patches as per digital macro codecs and board specific codecs and sort it.
>> -- Modify label and node names to lpass specific.
>> Changes Since V5:
>> -- Move soc specific bolero digital codec nodes to soc specific file.
>> -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
>> -- Change node name and remove redundant status property in sound node.
>> Changes Since V4:
>> -- Update nodes in sorting order.
>> -- Update DTS node names as per dt-bindings.
>> -- Update Node properties in proper order.
>> -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
>> -- Remove redundant labels.
>> -- Remove unused size cells and address cells in tx macro node.
>> -- Keep all same nodes at one place, which are defined in same file.
>> -- Add max98360a codec node to herobrine board specific targets.
>> Changes Since V3:
>> -- Move digital codec macro nodes to board specific dtsi file.
>> -- Update pin controls in lpass cpu node.
>> -- Update dependency patch list.
>> -- Create patches on latest kernel.
>> Changes Since V2:
>> -- Add power domains to digital codec macro nodes.
>> -- Change clock node usage in lpass cpu node.
>> -- Add codec mem clock to lpass cpu node.
>> -- Modify the node names to be generic.
>> -- Move sound and codec nodes to root node.
>> -- sort dai links as per reg.
>> -- Fix typo errors.
>> Changes Since V1:
>> -- Update the commit message of cpu node patch.
>> -- Add gpio control property to support Euro headset in wcd938x node.
>> -- Fix clock properties in lpass cpu and digital codec macro node.
>>
>> Srinivasa Rao Mandadapu (12):
>> arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital
>> macro codecs
>> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
>> 1.0/2.0 and IDP boards
>> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
>> 3.0/3.1
>> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and
>> IDP boards
>> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
>> arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP
>> boards
>> arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
>> arm64: dts: qcom: sc7280: Add lpass cpu node
>> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and
>> IDP boards.
>> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
>> arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP
>> boards
>> arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
>>
>> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++
>> .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++
>> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
>> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++
>> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++
>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++
>> 6 files changed, 679 insertions(+)
>>
>> --
>> 2.7.4
>>
Powered by blists - more mailing lists