Message-ID: <20220708094508.49ba647f.alex.williamson@redhat.com>
Date:   Fri, 8 Jul 2022 09:45:08 -0600
From:   Alex Williamson <alex.williamson@...hat.com>
To:     Abhishek Sahu <abhsahu@...dia.com>
Cc:     Cornelia Huck <cohuck@...hat.com>,
        Yishai Hadas <yishaih@...dia.com>,
        Jason Gunthorpe <jgg@...dia.com>,
        Shameer Kolothum <shameerali.kolothum.thodi@...wei.com>,
        Kevin Tian <kevin.tian@...el.com>,
        "Rafael J . Wysocki" <rafael@...nel.org>,
        Max Gurtovoy <mgurtovoy@...dia.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        linux-kernel@...r.kernel.org, kvm@...r.kernel.org,
        linux-pm@...r.kernel.org, linux-pci@...r.kernel.org
Subject: Re: [PATCH v4 1/6] vfio/pci: Mask INTx during runtime suspend

On Fri, 8 Jul 2022 14:51:30 +0530
Abhishek Sahu <abhsahu@...dia.com> wrote:

> On 7/6/2022 9:09 PM, Alex Williamson wrote:
> > On Fri, 1 Jul 2022 16:38:09 +0530
> > Abhishek Sahu <abhsahu@...dia.com> wrote:
> >   
> >> This patch adds INTx handling during runtime suspend/resume.
> >> All the suspend/resume related code for the user to put the device
> >> into the low power state will be added in subsequent patches.
> >>
> >> The INTx are shared among devices. Whenever any INTx interrupt comes  
> > 
> > "The INTx lines may be shared..."
> >   
> >> for the VFIO devices, then vfio_intx_handler() will be called for each
> >> device. Inside vfio_intx_handler(), it calls pci_check_and_mask_intx()  
> > 
> > "...device sharing the interrupt."
> >   
> >> and checks if the interrupt has been generated for the current device.
> >> Now, if the device is already in the D3cold state, then the config space
> >> can not be read. Attempt to read config space in D3cold state can
> >> cause system unresponsiveness in a few systems. To prevent this, mask
> >> INTx in runtime suspend callback and unmask the same in runtime resume
> >> callback. If INTx has been already masked, then no handling is needed
> >> in runtime suspend/resume callbacks. 'pm_intx_masked' tracks this, and
> >> vfio_pci_intx_mask() has been updated to return true if INTx has been
> >> masked inside this function.
> >>
> >> For the runtime suspend which is triggered for the no user of VFIO
> >> device, the is_intx() will return false and these callbacks won't do
> >> anything.
> >>
> >> The MSI/MSI-X are not shared so similar handling should not be
> >> needed for MSI/MSI-X. vfio_msihandler() triggers eventfd_signal()
> >> without doing any device-specific config access. When the user performs
> >> any config access or IOCTL after receiving the eventfd notification,
> >> then the device will be moved to the D0 state first before
> >> servicing any request.
> >>
> >> Signed-off-by: Abhishek Sahu <abhsahu@...dia.com>
> >> ---
> >>  drivers/vfio/pci/vfio_pci_core.c  | 37 +++++++++++++++++++++++++++----
> >>  drivers/vfio/pci/vfio_pci_intrs.c |  6 ++++-
> >>  include/linux/vfio_pci_core.h     |  3 ++-
> >>  3 files changed, 40 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
> >> index a0d69ddaf90d..5948d930449b 100644
> >> --- a/drivers/vfio/pci/vfio_pci_core.c
> >> +++ b/drivers/vfio/pci/vfio_pci_core.c
> >> @@ -259,16 +259,45 @@ int vfio_pci_set_power_state(struct vfio_pci_core_device *vdev, pci_power_t stat
> >>  	return ret;
> >>  }
> >>  
> >> +#ifdef CONFIG_PM
> >> +static int vfio_pci_core_runtime_suspend(struct device *dev)
> >> +{
> >> +	struct vfio_pci_core_device *vdev = dev_get_drvdata(dev);
> >> +
> >> +	/*
> >> +	 * If INTx is enabled, then mask INTx before going into the runtime
> >> +	 * suspended state and unmask the same in the runtime resume.
> >> +	 * If INTx has already been masked by the user, then
> >> +	 * vfio_pci_intx_mask() will return false and in that case, INTx
> >> +	 * should not be unmasked in the runtime resume.
> >> +	 */
> >> +	vdev->pm_intx_masked = (is_intx(vdev) && vfio_pci_intx_mask(vdev));
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int vfio_pci_core_runtime_resume(struct device *dev)
> >> +{
> >> +	struct vfio_pci_core_device *vdev = dev_get_drvdata(dev);
> >> +
> >> +	if (vdev->pm_intx_masked)
> >> +		vfio_pci_intx_unmask(vdev);
> >> +
> >> +	return 0;
> >> +}
> >> +#endif /* CONFIG_PM */
> >> +
> >>  /*
> >> - * The dev_pm_ops needs to be provided to make pci-driver runtime PM working,
> >> - * so use structure without any callbacks.
> >> - *
> >>   * The pci-driver core runtime PM routines always save the device state
> >>   * before going into suspended state. If the device is going into low power
> >>   * state with only with runtime PM ops, then no explicit handling is needed
> >>   * for the devices which have NoSoftRst-.
> >>   */
> >> -static const struct dev_pm_ops vfio_pci_core_pm_ops = { };
> >> +static const struct dev_pm_ops vfio_pci_core_pm_ops = {
> >> +	SET_RUNTIME_PM_OPS(vfio_pci_core_runtime_suspend,
> >> +			   vfio_pci_core_runtime_resume,
> >> +			   NULL)
> >> +};
> >>  
> >>  int vfio_pci_core_enable(struct vfio_pci_core_device *vdev)
> >>  {
> >> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> >> index 6069a11fb51a..1a37db99df48 100644
> >> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> >> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> >> @@ -33,10 +33,12 @@ static void vfio_send_intx_eventfd(void *opaque, void *unused)
> >>  		eventfd_signal(vdev->ctx[0].trigger, 1);
> >>  }
> >>  
> >> -void vfio_pci_intx_mask(struct vfio_pci_core_device *vdev)
> >> +/* Returns true if INTx has been masked by this function. */
> >> +bool vfio_pci_intx_mask(struct vfio_pci_core_device *vdev)
> >>  {
> >>  	struct pci_dev *pdev = vdev->pdev;
> >>  	unsigned long flags;
> >> +	bool intx_masked = false;
> >>  
> >>  	spin_lock_irqsave(&vdev->irqlock, flags);
> >>  
> >> @@ -60,9 +62,11 @@ void vfio_pci_intx_mask(struct vfio_pci_core_device *vdev)
> >>  			disable_irq_nosync(pdev->irq);
> >>  
> >>  		vdev->ctx[0].masked = true;
> >> +		intx_masked = true;
> >>  	}
> >>  
> >>  	spin_unlock_irqrestore(&vdev->irqlock, flags);
> >> +	return intx_masked;
> >>  }  
> > 
> > 
> > There's certainly another path through this function that masks the
> > interrupt, which makes the definition of this return value a bit
> > confusing.  
> 
>  For our case we should not hit that path. But we can return the
>  intx_masked true from that path as well to align return value.
> 
> > Wouldn't it be simpler not to overload the masked flag on
> > the interrupt context like this and instead set a new flag on the vdev
> > under irqlock to indicate the device is unable to generate interrupts.
> > The irq handler would add a test of this flag before any tests that
> > would access the device.  Thanks,
> > 
> > Alex
> >    
> 
>  We will set this flag inside runtime_suspend callback but the
>  device can be in non-D3cold state (For example, if user has
>  disabled d3cold explicitly by sysfs, the D3cold is not supported in
>  the platform, etc.). Also, in D3cold supported case, the device will
>  be in D0 till the PCI core moves the device into D3cold. In this case,
>  there is possibility that the device can generate an interrupt.
>  If we add check in the IRQ handler, then we won’t check and clear
>  the IRQ status, but the interrupt line will still be asserted
>  which can cause interrupt flooding.
> 
>  This was the reason for disabling interrupt itself instead of
>  checking flag in the IRQ handler.

Ok, maybe this is largely a clarification of the return value of
vfio_pci_intx_mask().  I think what you're looking for is whether the
context mask was changed, rather than whether the interrupt is masked,
which I think avoids the confusion regarding whether the first branch
should return true or false.  So the variable should be something like
"masked_changed" and the comment changed to "Returns true if the INTx
vfio_pci_irq_ctx.masked value is changed".

Testing is_intx() outside of the irqlock is potentially racy, so do we
need to add the pm-get/put wrappers on ioctls first to avoid the
possibility that pm-suspend can race a SET_IRQS ioctl?  Thanks,

Alex

Powered by blists - more mailing lists