linux-kernel - [PATCH v3 0/8] Fixes and cleanup for RS485

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220710150322.2846170-1-LinoSanfilippo@gmx.de>
Date:   Sun, 10 Jul 2022 17:03:14 +0200
From:   Lino Sanfilippo <LinoSanfilippo@....de>
To:     gregkh@...uxfoundation.org, jirislaby@...nel.org
Cc:     ilpo.jarvinen@...ux.intel.com, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org,
        andriy.shevchenko@...ux.intel.com, vz@...ia.com,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
        lukas@...ner.de, p.rosenberger@...bus.com,
        Lino Sanfilippo <l.sanfilippo@...bus.com>
Subject: [PATCH v3 0/8] Fixes and cleanup for RS485

From: Lino Sanfilippo <l.sanfilippo@...bus.com>

The following series includes cleanup and fixes around RS485 in the serial
core and uart drivers:

Patch 1: ar933x: Fix check for RS485 support
Patch 2: Remove superfluous code in ar933x.
Patch 3: Set the rs485 termination GPIO in the serial core. This is needed
	 since if the gpio is only accessible in sleepable context. It also
	 is a further step to make the RS485 handling more generic.
Patch 4: Move sanitizing of RS485 delays into an own function. This is in 
	 preparation of patch 4.
Patch 5: Sanitize RS485 delays read from device tree.
Patch 6: Correct RS485 delays in binding documentation.
Patch 7: Remove redundant code in 8250_dwlib.
Patch 8: Remove redundant code in 8250-lpc18xx.

Changes in v3:
- remove obsolete patch (due to changes by Ilpo)
- corrected and rephrase commit messages (pointed out by Andy)
- remove superfluous check (pointed out by Andy)
- separate ar933x UART bugfix and cleanup into different patches (as
  suggested by Ilpo)
- put the ar933x fix at the beginning of the series (as suggested by Andy)

Changes in v2:
- print a warning if termination GPIO is specified in DT/ACPI but is not
  supported by driver 
- fixed commit message for devtree documentation (as suggested by Andy)
- fixed code comment
- added patch 7


Lino Sanfilippo (8):
  serial: ar933x: Fix check for RS485 support
  serial: ar933x: Remove superfluous code in ar933x_config_rs485()
  serial: core, 8250: set RS485 termination gpio in serial core
  serial: core: move sanitizing of RS485 delays into own function
  serial: core: sanitize RS485 delays read from device tree
  dt_bindings: rs485: Correct delay values
  serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags

 .../devicetree/bindings/serial/rs485.yaml     |  4 +-
 drivers/tty/serial/8250/8250_dwlib.c          | 10 +---
 drivers/tty/serial/8250/8250_lpc18xx.c        |  6 +-
 drivers/tty/serial/8250/8250_port.c           |  3 -
 drivers/tty/serial/ar933x_uart.c              | 18 ++----
 drivers/tty/serial/serial_core.c              | 60 ++++++++++++-------
 6 files changed, 50 insertions(+), 51 deletions(-)


base-commit: 7e5b4322cde067e1d0f1bf8f490e93f664a7c843
-- 
2.25.1