| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220711192113.3522664-2-horatiu.vultur@microchip.com>
Date: Mon, 11 Jul 2022 21:21:12 +0200
From: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: <linux-gpio@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <linus.walleij@...aro.org>, <kavyasree.kotagiri@...rochip.com>,
<alexandre.belloni@...tlin.com>, <colin.foster@...advantage.com>,
<UNGLinuxDriver@...rochip.com>, <maxime.chevallier@...tlin.com>,
<michael@...le.cc>, <andy.shevchenko@...il.com>,
Horatiu Vultur <horatiu.vultur@...rochip.com>
Subject: [PATCH v3 1/2] pinctrl: ocelot: Fix pincfg for lan966x
The blamed commit introduce support for lan966x which use the same
pinconf_ops as sparx5. The problem is that pinconf_ops is specific to
sparx5. More precisely the offset of the bits in the pincfg register are
different and also lan966x doesn't have support for
PIN_CONFIG_INPUT_SCHMITT_ENABLE.
Fix this by making pinconf_ops more generic such that it can be also
used by lan966x. This is done by introducing 'ocelot_pincfg_data' which
contains the offset and what is supported for each SOC.
Fixes: 531d6ab36571 ("pinctrl: ocelot: Extend support for lan966x")
Signed-off-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
---
drivers/pinctrl/pinctrl-ocelot.c | 196 ++++++++++++++++++++-----------
1 file changed, 125 insertions(+), 71 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c
index 5f4a8c5c6650..4edb36cfa161 100644
--- a/drivers/pinctrl/pinctrl-ocelot.c
+++ b/drivers/pinctrl/pinctrl-ocelot.c
@@ -29,19 +29,12 @@
#define ocelot_clrsetbits(addr, clear, set) \
writel((readl(addr) & ~(clear)) | (set), (addr))
-/* PINCONFIG bits (sparx5 only) */
enum {
PINCONF_BIAS,
PINCONF_SCHMITT,
PINCONF_DRIVE_STRENGTH,
};
-#define BIAS_PD_BIT BIT(4)
-#define BIAS_PU_BIT BIT(3)
-#define BIAS_BITS (BIAS_PD_BIT|BIAS_PU_BIT)
-#define SCHMITT_BIT BIT(2)
-#define DRIVE_BITS GENMASK(1, 0)
-
/* GPIO standard registers */
#define OCELOT_GPIO_OUT_SET 0x0
#define OCELOT_GPIO_OUT_CLR 0x4
@@ -321,6 +314,14 @@ struct ocelot_pin_caps {
unsigned char a_functions[OCELOT_FUNC_PER_PIN]; /* Additional functions */
};
+struct ocelot_pincfg_data {
+ u8 pd_bit;
+ u8 pu_bit;
+ u8 drive_bits;
+ u8 schmitt_bit;
+ bool has_schmitt;
+};
+
struct ocelot_pinctrl {
struct device *dev;
struct pinctrl_dev *pctl;
@@ -328,10 +329,16 @@ struct ocelot_pinctrl {
struct regmap *map;
struct regmap *pincfg;
struct pinctrl_desc *desc;
+ struct ocelot_pincfg_data *pincfg_data;
struct ocelot_pmx_func func[FUNC_MAX];
u8 stride;
};
+struct ocelot_match_data {
+ struct pinctrl_desc desc;
+ struct ocelot_pincfg_data pincfg_data;
+};
+
#define LUTON_P(p, f0, f1) \
static struct ocelot_pin_caps luton_pin_##p = { \
.pin = p, \
@@ -1334,15 +1341,17 @@ static int ocelot_hw_get_value(struct ocelot_pinctrl *info,
ret = 0;
switch (reg) {
case PINCONF_BIAS:
- *val = regcfg & BIAS_BITS;
+ *val = regcfg &
+ (info->pincfg_data->pd_bit |
+ info->pincfg_data->pu_bit);
break;
case PINCONF_SCHMITT:
- *val = regcfg & SCHMITT_BIT;
+ *val = regcfg & info->pincfg_data->schmitt_bit;
break;
case PINCONF_DRIVE_STRENGTH:
- *val = regcfg & DRIVE_BITS;
+ *val = regcfg & info->pincfg_data->drive_bits;
break;
default:
@@ -1383,19 +1392,23 @@ static int ocelot_hw_set_value(struct ocelot_pinctrl *info,
ret = 0;
switch (reg) {
case PINCONF_BIAS:
- ret = ocelot_pincfg_clrsetbits(info, pin, BIAS_BITS,
+ ret = ocelot_pincfg_clrsetbits(info, pin,
+ info->pincfg_data->pd_bit |
+ info->pincfg_data->pu_bit,
val);
break;
case PINCONF_SCHMITT:
- ret = ocelot_pincfg_clrsetbits(info, pin, SCHMITT_BIT,
+ ret = ocelot_pincfg_clrsetbits(info, pin,
+ info->pincfg_data->schmitt_bit,
val);
break;
case PINCONF_DRIVE_STRENGTH:
if (val <= 3)
ret = ocelot_pincfg_clrsetbits(info, pin,
- DRIVE_BITS, val);
+ info->pincfg_data->drive_bits,
+ val);
else
ret = -EINVAL;
break;
@@ -1425,17 +1438,20 @@ static int ocelot_pinconf_get(struct pinctrl_dev *pctldev,
if (param == PIN_CONFIG_BIAS_DISABLE)
val = (val == 0);
else if (param == PIN_CONFIG_BIAS_PULL_DOWN)
- val = (val & BIAS_PD_BIT ? true : false);
+ val = !!(val & info->pincfg_data->pd_bit);
else /* PIN_CONFIG_BIAS_PULL_UP */
- val = (val & BIAS_PU_BIT ? true : false);
+ val = !!(val & info->pincfg_data->pu_bit);
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+ if (!info->pincfg_data->has_schmitt)
+ return -EOPNOTSUPP;
+
err = ocelot_hw_get_value(info, pin, PINCONF_SCHMITT, &val);
if (err)
return err;
- val = (val & SCHMITT_BIT ? true : false);
+ val = !!(val & info->pincfg_data->schmitt_bit);
break;
case PIN_CONFIG_DRIVE_STRENGTH:
@@ -1491,8 +1507,8 @@ static int ocelot_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
arg = (param == PIN_CONFIG_BIAS_DISABLE) ? 0 :
- (param == PIN_CONFIG_BIAS_PULL_UP) ? BIAS_PU_BIT :
- BIAS_PD_BIT;
+ (param == PIN_CONFIG_BIAS_PULL_UP) ? info->pincfg_data->pu_bit :
+ info->pincfg_data->pd_bit;
err = ocelot_hw_set_value(info, pin, PINCONF_BIAS, arg);
if (err)
@@ -1501,7 +1517,10 @@ static int ocelot_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- arg = arg ? SCHMITT_BIT : 0;
+ if (!info->pincfg_data->has_schmitt)
+ return -EOPNOTSUPP;
+
+ arg = arg ? info->pincfg_data->schmitt_bit : 0;
err = ocelot_hw_set_value(info, pin, PINCONF_SCHMITT,
arg);
if (err)
@@ -1562,69 +1581,95 @@ static const struct pinctrl_ops ocelot_pctl_ops = {
.dt_free_map = pinconf_generic_dt_free_map,
};
-static struct pinctrl_desc luton_desc = {
- .name = "luton-pinctrl",
- .pins = luton_pins,
- .npins = ARRAY_SIZE(luton_pins),
- .pctlops = &ocelot_pctl_ops,
- .pmxops = &ocelot_pmx_ops,
- .owner = THIS_MODULE,
+static struct ocelot_match_data luton_desc = {
+ .desc = {
+ .name = "luton-pinctrl",
+ .pins = luton_pins,
+ .npins = ARRAY_SIZE(luton_pins),
+ .pctlops = &ocelot_pctl_ops,
+ .pmxops = &ocelot_pmx_ops,
+ .owner = THIS_MODULE,
+ },
};
-static struct pinctrl_desc serval_desc = {
- .name = "serval-pinctrl",
- .pins = serval_pins,
- .npins = ARRAY_SIZE(serval_pins),
- .pctlops = &ocelot_pctl_ops,
- .pmxops = &ocelot_pmx_ops,
- .owner = THIS_MODULE,
+static struct ocelot_match_data serval_desc = {
+ .desc = {
+ .name = "serval-pinctrl",
+ .pins = serval_pins,
+ .npins = ARRAY_SIZE(serval_pins),
+ .pctlops = &ocelot_pctl_ops,
+ .pmxops = &ocelot_pmx_ops,
+ .owner = THIS_MODULE,
+ },
};
-static struct pinctrl_desc ocelot_desc = {
- .name = "ocelot-pinctrl",
- .pins = ocelot_pins,
- .npins = ARRAY_SIZE(ocelot_pins),
- .pctlops = &ocelot_pctl_ops,
- .pmxops = &ocelot_pmx_ops,
- .owner = THIS_MODULE,
+static struct ocelot_match_data ocelot_desc = {
+ .desc = {
+ .name = "ocelot-pinctrl",
+ .pins = ocelot_pins,
+ .npins = ARRAY_SIZE(ocelot_pins),
+ .pctlops = &ocelot_pctl_ops,
+ .pmxops = &ocelot_pmx_ops,
+ .owner = THIS_MODULE,
+ },
};
-static struct pinctrl_desc jaguar2_desc = {
- .name = "jaguar2-pinctrl",
- .pins = jaguar2_pins,
- .npins = ARRAY_SIZE(jaguar2_pins),
- .pctlops = &ocelot_pctl_ops,
- .pmxops = &ocelot_pmx_ops,
- .owner = THIS_MODULE,
+static struct ocelot_match_data jaguar2_desc = {
+ .desc = {
+ .name = "jaguar2-pinctrl",
+ .pins = jaguar2_pins,
+ .npins = ARRAY_SIZE(jaguar2_pins),
+ .pctlops = &ocelot_pctl_ops,
+ .pmxops = &ocelot_pmx_ops,
+ .owner = THIS_MODULE,
+ },
};
-static struct pinctrl_desc servalt_desc = {
- .name = "servalt-pinctrl",
- .pins = servalt_pins,
- .npins = ARRAY_SIZE(servalt_pins),
- .pctlops = &ocelot_pctl_ops,
- .pmxops = &ocelot_pmx_ops,
- .owner = THIS_MODULE,
+static struct ocelot_match_data servalt_desc = {
+ .desc = {
+ .name = "servalt-pinctrl",
+ .pins = servalt_pins,
+ .npins = ARRAY_SIZE(servalt_pins),
+ .pctlops = &ocelot_pctl_ops,
+ .pmxops = &ocelot_pmx_ops,
+ .owner = THIS_MODULE,
+ },
};
-static struct pinctrl_desc sparx5_desc = {
- .name = "sparx5-pinctrl",
- .pins = sparx5_pins,
- .npins = ARRAY_SIZE(sparx5_pins),
- .pctlops = &ocelot_pctl_ops,
- .pmxops = &ocelot_pmx_ops,
- .confops = &ocelot_confops,
- .owner = THIS_MODULE,
+static struct ocelot_match_data sparx5_desc = {
+ .desc = {
+ .name = "sparx5-pinctrl",
+ .pins = sparx5_pins,
+ .npins = ARRAY_SIZE(sparx5_pins),
+ .pctlops = &ocelot_pctl_ops,
+ .pmxops = &ocelot_pmx_ops,
+ .confops = &ocelot_confops,
+ .owner = THIS_MODULE,
+ },
+ .pincfg_data = {
+ .pd_bit = BIT(4),
+ .pu_bit = BIT(3),
+ .drive_bits = GENMASK(1, 0),
+ .has_schmitt = true,
+ .schmitt_bit = BIT(2),
+ },
};
-static struct pinctrl_desc lan966x_desc = {
- .name = "lan966x-pinctrl",
- .pins = lan966x_pins,
- .npins = ARRAY_SIZE(lan966x_pins),
- .pctlops = &ocelot_pctl_ops,
- .pmxops = &lan966x_pmx_ops,
- .confops = &ocelot_confops,
- .owner = THIS_MODULE,
+static struct ocelot_match_data lan966x_desc = {
+ .desc = {
+ .name = "lan966x-pinctrl",
+ .pins = lan966x_pins,
+ .npins = ARRAY_SIZE(lan966x_pins),
+ .pctlops = &ocelot_pctl_ops,
+ .pmxops = &lan966x_pmx_ops,
+ .confops = &ocelot_confops,
+ .owner = THIS_MODULE,
+ },
+ .pincfg_data = {
+ .pd_bit = BIT(3),
+ .pu_bit = BIT(2),
+ .drive_bits = GENMASK(1, 0),
+ },
};
static int ocelot_create_group_func_map(struct device *dev,
@@ -1913,6 +1958,7 @@ static struct regmap *ocelot_pinctrl_create_pincfg(struct platform_device *pdev)
static int ocelot_pinctrl_probe(struct platform_device *pdev)
{
+ const struct ocelot_match_data *data;
struct device *dev = &pdev->dev;
struct ocelot_pinctrl *info;
struct reset_control *reset;
@@ -1929,7 +1975,15 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev)
if (!info)
return -ENOMEM;
- info->desc = (struct pinctrl_desc *)device_get_match_data(dev);
+ data = device_get_match_data(dev);
+ if (!data)
+ return -EINVAL;
+
+ info->desc = devm_kmemdup(dev, &data->desc,
+ sizeof(struct pinctrl_desc), GFP_KERNEL);
+ info->pincfg_data = devm_kmemdup(dev, &data->pincfg_data,
+ sizeof(struct ocelot_match_data),
+ GFP_KERNEL);
reset = devm_reset_control_get_optional_shared(dev, "switch");
if (IS_ERR(reset))
--
2.33.0
Powered by blists - more mailing lists