linux-kernel - [PATCH v7 7/7] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220711203408.2949888-7-robimarko@gmail.com>
Date:   Mon, 11 Jul 2022 22:34:08 +0200
From:   Robert Marko <robimarko@...il.com>
To:     agross@...nel.org, bjorn.andersson@...aro.org,
        konrad.dybcio@...ainline.org, lee.jones@...aro.org,
        robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        linus.walleij@...aro.org, jic23@...nel.org, lars@...afoo.de,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-iio@...r.kernel.org
Cc:     Robert Marko <robimarko@...il.com>
Subject: [PATCH v7 7/7] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply

Since now we have control over the PMP8074 PMIC providing various system
voltages including L11 which provides the SDIO/eMMC I/O voltage set it as
the SDHCI VQMMC supply.

This allows SDHCI controller to switch to 1.8V I/O mode and support high
speed modes like HS200 and HS400.

Signed-off-by: Robert Marko <robimarko@...il.com>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index de20cb98acd3..a73909a24935 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -3,6 +3,7 @@
 /* Copyright (c) 2017, The Linux Foundation. All rights reserved.
  */
 #include "ipq8074.dtsi"
+#include "pmp8074.dtsi"
 
 / {
 	#address-cells = <0x2>;
@@ -87,6 +88,7 @@ nand@0 {
 
 &sdhc_1 {
 	status = "okay";
+	vqmmc-supply = <&l11>;
 };
 
 &qusb_phy_0 {
-- 
2.36.1