[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <82d4507a-d092-8cb0-2e88-4290661d114d@linaro.org>
Date: Tue, 12 Jul 2022 17:12:18 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Mikhail Rudenko <mike.rudenko@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] media: dt-bindings: media: i2c: document OV4689 DT
bindings
On 12/07/2022 16:19, Mikhail Rudenko wrote:
> Add device-tree binding documentation for OV4689 image sensor driver,
> and the relevant MAINTAINERS entries.
>
> Signed-off-by: Mikhail Rudenko <mike.rudenko@...il.com>
> ---
> .../bindings/media/i2c/ovti,ov4689.yaml | 122 ++++++++++++++++++
> MAINTAINERS | 7 +
> 2 files changed, 129 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
> new file mode 100644
> index 000000000000..6bdebe5862b4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV4689 CMOS Sensor Device Tree Bindings
s/Device Tree Bindings//
> +
> +maintainers:
> + - Mikhail Rudenko <mike.rudenko@...il.com>
> +
> +description: |-
No need for -
> + The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
> + image sensor. Ihis chip supports high frame rate speeds up to 90 fps
> + at 2688x1520 resolution. It is programmable through an I2C
> + interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
> + connection.
> +
> +allOf:
> + - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> + compatible:
> + const: ovti,ov4689
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + description:
> + External clock for the sensor.
This goes to clocks instead.
> + items:
> + - const: xclk
No need for clock-names for such case.
> +
> + dovdd-supply:
> + description:
> + Definition of the regulator used as Digital I/O voltage supply.
s/Definition of the regulator used as //
It's redundant...
> +
> + avdd-supply:
> + description:
> + Definition of the regulator used as Analog voltage supply.
Ditto
> +
> + dvdd-supply:
> + description:
> + Definition of the regulator used as Digital core voltage supply.
Ditto
> +
> + powerdown-gpios:
> + maxItems: 1
> + description:
> + Reference to the GPIO connected to the powerdown pin (active low).
s/Reference to the//
> +
> + reset-gpios:
> + maxItems: 1
> + description:
> + Reference to the GPIO connected to the reset pin (active low).
The same.
> +
> + orientation: true
> +
> + rotation: true
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + additionalProperties: false
> + description:
> + Output port node, single endpoint describing the CSI-2 transmitter.
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
Best regards,
Krzysztof
Powered by blists - more mailing lists